|
| 1 | Loading & unloading of 9 m PSC, squre and RSJ pole |
| 2 | Transporting of 9m PSC, squre and RSJ pole from Road side to pole pit up to 2 KM |
| 3 | Excavation of pole pit in Rocky ground 9.14 Rcc 9 m psc and RSJ up to 36' pole |
| 4 | Erection of 36' RSJ pole |
| 5 | Loading & unloading of 8 m PSC and RCC pole |
| 6 | Transporting of 8m PSC and squre pole from Road side to pole pit up to 2 KM |
| 7 | Excavation of pole pit in Rocky ground 8 m PSC and RCC pole |
| 8 | Erection of 8 m, PSC pole |
| 9 | Fixing of LT 3Q X arm |
| 10 | Fixing of 3.5, 4.5 V X arm & 5.5 Tap Channel X arm |
| 11 | Fixing of HT/LT 'TI' Fittings |
| 12 | Dismantling & Re-Fix of 3Q Xarm |
| 13 | Dismantling & Re-Fix of SQ X arm |
| 14 | Dismantling & Re-Fixing of 3.5, 4.5 V X arm & 5.5 Tap Channel X arm |
| 15 | Dismantling & Re-Fixing of Gaurding X arm |
| 16 | Dismantling & Re Fixing of HT/LT 'TI' Fittings |
| 17 | Fixing of HT Pin Insulater |
| 18 | Fixing of LT Pin Insulater |
| 19 | Fixing of HT Disc Insulater |
| 20 | Fixing of LT shackle |
| 21 | Fixing of Aluminium knob |
| 22 | Dismantling & Re Fixing of HT Pin Insulater |
| 23 | Dismantling & Re Fixing of LT Pin Insulater |
| 24 | Dismantling & Re Fixing of HT Disc Insulater |
| 25 | Dismantling & Re Fixing of LT shackle |
| 26 | Dismantling & Re Fixing of Aluminium knob |
| 27 | Dis & Redoing of S phase connection |
| 28 | Dis & Redoing of 3 phase connection |
| 29 | Dismantiling Re-Erection of 1*40 W tube light complete set |
| 30 | Fixing of street light switching point arrangement |
| 31 | Excavation of stay pit on rocky ground and erection of stay set |
| 32 | Excavation of stay pit and erection of stay set |
| 33 | Dismantling and re Erection of stay set complete |
| 34 | Dismantling & Re Erection of stay set complete with stay pit on rocky ground |
| 35 | Dismantling & Re Erection of stay set complete with stay pit on normel ground |
| 36 | Stringing of HT line 7/3.15 AAAC or 7/3.35 ACSR cut point |
| 37 | Stringing of HT line 7/4.09 ACSR mm cut point |
| 38 | Stringing of LT line7/3.15 AAAC or 7/3.35 ACSR cut point |
| 39 | Dismantling & re Stringing of HT line 7/3.15 AAAC or 7/3.35 ACSR cut point |
| 40 | Dismantling & re Stringing of HT line 7/4.09 ACSR mm cut point |
| 41 | Dismantling & re Stringing of LT line 7/2.50 AAAC or 7/2.59 ACSR pin point |
| 42 | Dismantling & re Stringing of LT line 7/2.50 AAAC or 7/2.59 ACSR cut point |
| 43 | Dismantling & re Stringing of LT line 7/3.15 AAAC or 7/3.35 ACSR pin point |
| 44 | Dismantling & re Stringing of Lt line7/3.15 AAAC or 7/3.35 ACSR cut point |
| 45 | Change of Pin point to cut point of lt line |
| 46 | Dismantling & Re erection of split newtral gaurding |
| 47 | Erection of 11 KV single pole Structere including erection of DT complete without center support |
| 48 | Erection of 11 KV single pole Structere with center support |
| 49 | Loadind & un loading of Distribution Transformer below 200KVA |
| 50 | Transporting of Distribution Transformer below 200 KVA |
| 51 | Erection of Distribution Transformer upto 200 KVA |
| 52 | Set right and leaning of HT pole |
| 53 | Set right and leaning of LT pole |
| 54 | Plinth work for upto 100 KVADT wih constrution meterial (under ground 3+above ground 7)(4.6*3.6) |
| 55 | Loading & unloading of line materials |
| 56 | Transporting line materials from substore to section office and office to work spot up to 20 km |
| 57 | Drilling / Less than 23mm holes per hole / Slatted holes of slotted holes |
| 58 | OrdinaryTree Clearance |
| 59 | Coconut Tree Clearance Please Enable Macros to View BoQ information |
