|
| 1 | CIVIL WORK |
| 2 | Dismantling Reinforced cement concrete by using deploying machineries and clearing away as directed by the departmental officers. |
| 3 | Dismantling Brick / stone masonry in cement mortar walls under 3m height and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers. |
| 4 | Dismantling floor finish and dadooing walls in cement mortar with mosaic tiles , glazed tiles and cuddapah slab and clearing away as directed by the departmental officers. |
| 5 | Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. Clearing, leveling the site, shoring, strutting, bailing of water wherever necessary etc., complete complying with standard specification and as directed. |
| 6 | CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including mixing by mechanical means de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 7 | Plain Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed. |
| 8 | BRICK WORK in cement mortor 1:5(one cement, five sand) using best quality stock bricks of size 9” x4 3/8” x 2 ¾” for walls including cost of scaffolding curing, finishing etc., complete complying with standard specification and as directed by the departmental officers.In foundation and basement. |
| 9 | In Ground floor upto 4.50M height above basement. |
| 10 | Manufacturing, Supplying and fixing in position of rain beating RCC jally, 5 cm thick in cement concrete 1:2:4 using 20mm stone jelly, including cost and conveyance of all materials labour charges for mixing, laying, casting, curing and fixing in position of jolly as directed and cost of steel, fabrication of reinforcement, etc., complete. |
| 11 | PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including mortar plasticizer at 200ml per Kg of cement used, cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 12 | Paving the flooring with double charged vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick with required cement slurry and mortar plasticizer in all floors and the top pointed with water resistant tile epoxy grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Paving the flooring with self designed Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors with required cement slurry and mortar plasticizer in all floors and the top pointed with water resistant tile epoxy grout at the rate of 0.27 kg / m2 including finishing the joints and pointing flush with even surfaces etc., complete complying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works). |
| 14 | Dadooing the walls with colour printed Design glazed tiles of size 150mmx150mmx6mm of approved quality and colour over a base layer of C.M.1:2, 10mm thick with required mortar plasticizer in all floors and pointing the joints with water resistant tile epoxy grout at the rate of 0.27 kg/sqm neatly in all floors, curing etc., complete complying with standard specification and as directed by the departmental officers. (The tiles should be got approved by the Executive engineer before use on works). |
| 15 | Supply and fixing in position of best Indian make white / colour glazed eartherware lipped mouth flat back urinal of best quality and approved make of size 430mmx260mmx350mm with GI Pipe, 32mm dia bell mouth PVC Connection and waste pipe, 15mm dia GI Pipe of required length, 15mm dia GM Wheel valve, 15mm dia brass nipple 2 Nos and fixing the urinals in position with necessary TW plugs, Clamps, Screws etc., including dismantling masonry and redoing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc., complete complying with standard specifications and as directed by the departmental officers.(The Urinal should be got approved by the Executive Engineer before use on works) |
| 16 | Supplying and fixing of synthetic grey, paradise and similar varieties of Granite of size 0.75x1.50m. of 20mm thick in all floor for urinal partition including cost of material labour charges for fixing and polishing etc., complete as directed by the departmental officers. |
| 17 | Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 18 | Supplying and fixing white glazed European water closet of approved best quality and make with 100mm P or S trap connecting with CI pipe of 10mm dia/PVC pipe of 110mm dia with double flapped rigid PVC black seat and seat cover with C.P brass hinges,including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws,etc.,including supplying and fixing10 litres/12.5 litres of capacity PVC low level flushing tank with a pair of CI brackets,etc.,complete with all internal fittings such as 15mm brass ball valve wuth polythene float with brasshandle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings etc., complete complying with standard specification. |
| 19 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm dia brass chromium plated piller tap, 32 mm dia C.P. waste coupling, 32 mm dia P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc., complete complying with standard specifications (the wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 20 | Supplying and fixing in position of best approved quality of rain water down fall pipe 110mm dia having a pressure of 4Kg/sq.cm including cost of PVC bents, PVC shoe, cast iron gratings of required diameter and special clamps, brass screws nails etc., and fixing of cast iron gratings at junction of parapet and the junction of roof slab including finishing neatly etc., complete complying with standard specification as directed by the departmental officers. |
| 21 | Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete as directed by the departmental officers. |
| 22 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers. |
| 23 | 75mm dia PVC soil / waste pipe |
| 24 | Supplying and fixing in position 110mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 25 | Supplying and fixing in position 110mm dia PVC Door elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete.. |
| 26 | Supplying and fixing in position 110mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 27 | Supplying and fixing in position 110mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete.. |
| 28 | Supplying and fixing in position 75mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 29 | Supplying and fixing in position 75mm dia PVC Door elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 30 | Supplying and fixing in position 75mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete.. |
| 31 | Supplying and fixing in position 75mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 32 | Supplying, and fixing PVC pipes of 32mm dia (having working pressure 10 Kg/sqcm ) of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all`` taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. |
| 33 | Supplying, and fixing PVC pipes of 25mm dia (having working pressure 10kg/sqcm) of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. |
| 34 | Supplying and fixing in position 32mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete.. |
| 35 | Supplying and fixing in position 32mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 36 | Supplying and fixing in position 32mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 37 | Supplying and fixing in position 25mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 38 | Supplying and fixing in position 25mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 39 | Supplying and fixing in position 25mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete.. |
| 40 | Supplying and fixing UPVC (Un-Plasticized Polyviny Chloride ) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash an outer frame that enables opening of the window. The window should be fized to the wall the 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. |
| 41 | Supplying fabricating and fixing in position of Aluminium, Anodised natural colour matt finish Single leaf door of size 2.10mx1.00m half glazed and half PLB board using 12mm thick PLB board and 5.50mm thick glazed door using rectangular AW.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading . A1 chips Best double action floor spring. Aluminium handles on both sides floor stopper , Tower bolt locks and glass including materials labour, power consumption charges required for fabrication if necessary chipping ,dismantling making necessary holes in RCC columns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc., complete . The aluminium surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) for all sections . All the materials should be got approved by the Engineer incharge before fixing etc, Complete complying with Standard Specification and as directed. |
| 42 | Providing partition with aluminium anodized natural colour matt finish aluminium partition partly glazed partly prelaminated board with aluminium box section of size 63.5X38.10X1.28mm, 1.414@ 0.818kg/m horizontal members are spaced at 90cm centre to centre and vertical members are spaced at 1.2m, 2.1m and 2.8m height from ground level, bottom panel should be covered with 9mm thick PLB etc., complete complying with standard specifications and as directed by the departmental officers. by the departmental officers. |
| 43 | Supply for fixing of Hydraulic door closer of various sizes of approved quality using aluminum extruded section body tubular type universal hydraulic door closer with double speed adjustment like Hardwyn (make) Gazel (or) equivalent (with ISI Monogram) cost includes labour and materials etc.,. |
| 44 | Supplying and fixing in position of bevelled edge mirror of size 600X450mm PVC/fibre glass framed 5.5mm thick shelf type with hard board packing etc., complete complying with standard specification as directed by the departmental officers.. |
| 45 | Supplying and fixing Brass Chromium platted Towel Rail 600mm Long and 20mm diameter with brackets of same materials including cost of teak wood plugs, CP Screws etc., complete complying with standard specification as directed by departmental officers. |
| 46 | Supplying and fixing best approved quality Procelain CP soap tray of size 150x150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications (The soap tray should be got approved by Executive Engineer before use on works).. |
| 47 | Supplying and fixing in postion CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm dia outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works) |
| 48 | Supplying and fixing in position CI Nahini Trap / Floor Trap with best stainless steel gratings of approved brand and quality fixed over a bed of brick jelly lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) and finished with cement mortar 1:3 (One cement and Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahini Trap should be got approved by the Executive Engineer before use on work). |
| 49 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve of 25mm dia with ISI make including cost of shellac, thread balls, etc., complete. |
| 50 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers. |
| 51 | Supply and fixing Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock bottom rails the steel tubes shall be covered with 5mm thick solid PVC sheets shutter using 5mm thick solid PVC sheet for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x30mm. The over all size of top rail lock rail and bottom rail shall be 75mmx30mm. The over all size of frames shall be 50mmx45mm with suitable shutter. |
| 52 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder / rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-charge. (Note: stainless steel butt hinges and necessary S.S.screws shall be paid separately) 30mm thick. |
| 53 | Stainless steel butt hinges 125x64x2.50mm. |
| 54 | Tower bolt 200x10mm. |
| 55 | Handle 125mm. |
| 56 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position complete as per direction of Engineer-in-charge Frame size 65x100mm. |
| 57 | Painting the walls with two coats ready mixed interior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed. |
| 58 | Painting the walls with two coats ready mixed exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed. |
| 59 | Supplying , fabricating, hoisting and erection of MS angle TRUSSES & PURLIN of ISI size 50 X 50 X 5mm including drilling holes and painting the purlins with two coats of anticorrosive metallic nut brown colour paint of approved quality and colour over one coat of red oxide primer etc., complete complying with standard specification and as directed. |
| 60 | Supplying and laying of High profile colour galvalume sheet (as per ISI Standard) with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick not less than 150 GSM and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m and long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site) |
| 61 | Providing cement concrete ring of size 1.20m dia ring at required depth the charges including Transport, labour charges, fixing, pointing etc., complete. |
| 62 | Supplying and fixing tank cover of size 1.20m dia of best approved quality including raising the elevated portion around the cover with cement mortar 1:3 and plastered with 1.5 12mm thick etc., complete |
| 63 | Construction of Inspection Chamber of clear size 0.45mx0.45m including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1;5 (One cement and Five sand) using best quality of second class Ground Mould Bricks of size 9”x4 3/8” 2x3/4”with Plastering with Cement Mortar 1:3 (One cement and Three Plastering Sand) 12mm thick inner and outer sides and wearing coat 1:3:6 (One cement, three crushed stone sand and Six aggregate) 15 cm thick and covered with precast slab 5 cm thick etc., complete complying with standard specification and as directed by the departmental officers. |
| 64 | Removing the waste wood and waste Garbage at RM office campus by using Tipper with Labours which includes hiring charges, fuel charges etc., Please Enable Macros to View BoQ information |
