|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Executive Engineer(E) PWD M-253 Name of Work:-RMO of electrical and mechanical installations on PWD roads in East Delhi under EMD M-253, Delhi. [SH:- Providing & Fixing of LED Signage Board & photo luminescent self glowing signages at Substation) NIT No.:14/EE(E)/PWD M-253/2026-27 Estimated Cost:-23,60,466/- Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Sub Head Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Providing and fixing of photo luminescent maintenance free self glowing single side signages made of 2.00 mm thick aluminium sheet comprising of zinc sulphide chargeable crystals which glow in dark printed on U-1000 photoluminscent coating containing luminescent 111 as base chemical cover with U/V stabilized coating & mounting arrangement on wall/ceiling as per site conditions with colour combination of the sheet and letter as per IS:12349 amended upto date and height & width of signages as per direction of E-in-C complete etc.as required. |
| 3 | Supplying, installation, Testing and commissioning of LED Backelite character Board i/c wiring, connections, fixing the board to the wall with all fixing arrangement which includes the following properties etc. complete as required. a) Frame: 1\\" x 1\\" S.S. Square pipe. (18 SWG) b) Back side cover: ACP Sheet 3mm c) Front side Base: ACP Sheet 3mm with CNC cut slots for letters to be displayed d) Display Letters: Acrylic sheet 5mm or more thick on slots of front ACP sheet e) Back Light: LED Modules with maximmum gap of 50mm between two modulesf) LED Modules: Have 3/4 LED's 1.5/2 Watt per module, input voltage 12 V DC, CT- 6000K/6500K g) SMPS: IP 68 with required power output |
| 4 | SITC of Fire bucket made of MS sheet of 9 Ltr. capacity i/c filling of Yamuna sand in the bucket having provision of fire bucket stand Canopy suitable for 6 buckets made of MS angle to mount the bucket complete with painting complete etc. as required. |
| 5 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment) |
| 6 | Fabrication, Supplying, fixing 3D LED outdoor type IP-66 display in single / multi languages in approved color & design made of back supported 3D channel letters of required height, width & depth as per requirement of matter to be displayed made out of 3 mm or more thick acrylic sheet having LED modules installed inside the channel letters throughout the length of letters with maximum 50mm gap between two consecutive modules, suitable AC to DC adopter / SMPS to power LED modules including all other standard accessories and back frame with suitable intermedite members made out of 1\\" x 1\\" S.S. Square tubes (18SWG), wiring, connections, suitable mounting arragment to ensure proper safety etc complete as approved by teh engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment) |
| 7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete with hinges, sliding door bolt & godown lock on the openable part of structure etc as reqd. Total in Figures 2360466.0 23 Twenty Three Lakh Sixty Thousand Four Hundred & Sixty Six Only Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
