|
| 1 | I-10, p- 11Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within alead of 75m as directed |
| 2 | I-1,p- 189Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excludingcost of chipping over concrete surface]With 1:6 cement mortar20 mm thick plaster qty is the same as item / sl 01 |
| 3 | I-4 ,p- 198Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable forreceiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the (Engineer-in -charge). |
| 4 | I-5/b , p-204Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)Qty from item no 02 (plaster) =101sqm |
| 5 | I- 1/b), p- 200Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.(Qty from item NO - 3 minus open area of door window) |
| 6 | I -4 , p-201Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats) i) Standard QualityQty is the same as item no 5 |
| 7 | I-2 (A) ,p 189Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :A) On wooden/plastered surfacesWith super gloss (hi-gloss)Two coats (with any shade except white) |
| 8 | I-2 (A) ,p 189Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surfacesWith super gloss (hi-gloss)Two coats (with any shade except white)Steel Windows ----- |
| 9 | I-1, p- 205Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6m height for external wall)4 mm thick --- |
| 10 | I-24 , p-113Easing, oiling and adjusting the steel shutters including scraping all members and fitting so as to make the shutters easily operable (no extra payment will be made for taking out and fixing glass, if necessary). |
| 11 | I-22,p- 113Repairing steel shutter with new rivets including taking out and refixing, adjusting, welding, cleaning cutting holes, mending good damage to match with the existing one. |
| 12 | Labourers for taking out damaged Steel windowMale majdoor |
| 13 | i-13 (a), Page 104 M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in groundfloor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25%for each addl. floor above 4th floor)(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. ** 19mm x 6mm section of flat bar |
| 14 | Add: GST @ 18 % Please Enable Macros to View BoQ information |
