|
| 1 | Operation & Maintenance of Clear Water ,Sumpand Dewatering Pump Sets, DG Set of 400 KVA Rating, and all other Electrical & Mechanical Equipments at Command Tank Pumping Station and storm water pump sets at C-9, Vasant Kunj as per Inventory ,terms & conditions attached |
| 2 | Routine maintenance and Operation of sewage and dewatering pump sets and DG set as per the inventory , terms and condition attached at the following DDA site Sewage pumping station near CNG Station, Shopping mall, West of JNU,Vasant Kunj Ph II. -1 Job |
| 3 | Supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etc. as required. a) 5/6 amps switch |
| 4 | b) 15/16 A switch |
| 5 | c) 3 pin 5/6 A socket outlet |
| 6 | d) 6 pin 15/16 A socket outlet |
| 7 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole |
| 8 | b) Double pole |
| 9 | Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round /square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range - 5 0C to 40 0C, internal surge protection of 2.5 KV with Short &Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initialLumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/ 4000°K /5700°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable andearthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast Extruded aluminium Body including trim . (LED Down lighter (SMD Type) (System lumenefficacy >135lm/Watt)a) 40 Watt |
| 10 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135lm/Watt) Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC,frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be ofrelevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). a) 100 Watt |
| 11 | Comprehensive material for maintenance of 02 nos. 20 HP Storm water pump including repair / replacement of any part of parts to the original finish & performance required for fully functional system for original system requirement etc. as required. |
| 12 | Providing & fixing Powder fire extinguisher (Stored Pressure Type) capacity 6 kg duly ISI mark conferming to IS-15683:2006, U:L listed map 90% powder, ABC powder complete with squeeze grip release valve, discharge pipe locking arrangement, pressure guage, operation mannual and bracket. etc. complete as required. |
| 13 | Repair /Servicing including replacement ball bearings, bearing bush ,neck ring etc of 3 Phase 40 HP Pump and greasing of 40 HP Motor of Kirloskar make i/c dismaintling, lifting ,cartage both sides lowering, reassembelling, connections ,testing & commissioning etc.completete as required. (At SPS Shopping Mall) |
| 14 | Repair / Servicing including replacement ball bearings/ bearing bush etc of 3 H.P. 3 phase dewatering submersible type sump. Pump dismaintling ,cartage reassembelling greasing completete as required. (At SPS Shopping Mall) |
| 15 | Rewinding of 3HP, 3 Phase ,1440 RPM, 5O HZ motor of submersible sump dewatering pump set i/c dismentaling, reassembling ,testing & commissioning etc as required (At SPS Shopping Mall) |
| 16 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holesin cubicle panel, making connections, etc. as required. a) 125 A, 16 KA,TPMCCB |
| 17 | Supply of following XLPE insuleted , XLPE/PVC sheethed Alumimium contoter ,Armoured power cable of 1.1KV grade i/c testing etc and credit for dismantal material. a) 2 x 10 Sq.mm. Please Enable Macros to View BoQ information |
