|
| 1 | Providing and fixing of Single phase, 2 HP (1.5KW) submersible pump having head range 40-60 mtr flow range 190-30 LPM, having outlet size-32 mm, suitable for 6\\"(150 mm) dia bore well, 50 Hz including installation and lowering, testing and commissioning etc as required. (Make: KSB /Kirloskar / Crompton / Lubi / CRI). |
| 2 | Supplying and fixing of 4 sqmm flat type Three Core Supplying & fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/HDPE/PVC/pipe/ in bore well/in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. as required Make - Polycab/Havells/Finolex/Standard. |
| 3 | Supplying and fixing of 32 mm sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (Used for Bore to starter panel). |
| 4 | Providing and fixing of 8 mm dia galvanized steel wire rope along with U clamp for the safety of 2 HP submersible pumping system |
| 5 | Supplying and fixing MS powder coated clamp for holding of column pipes 40 mm dia complete with bolt nut washer etc complete etc as required. |
| 6 | Supplying and laying of 40 mm dia (OD-40 mm & ID-32 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (75) cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required. |
| 7 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE Armoured power cable of 1.1 KV grade armoured UG electric cable with aluminium conductor of size 2 x 16 sq.mm. in the existing HDPE pipe/ metal/ open duct as required. |
| 8 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.1. thimble excavation and re-filling as required. |
| 9 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. (Panel Earthing). |
| 10 | Providing, Installation, Testing and Commissioning of outdoor type totally enclosed weather proof feeder panel with sloping canopy top of suitable size (minimum size 500mm x 400mm x 300mm) having viberation free structure chemically treated with 7 tank process before painting for surface treatment and powder coated, fabricated from 14 SWG/2 mm thick CRCA sheet suitable for 415 volts, 50 Hz A.C. supply with gland plate, hinged front openable double leaf doors and locking arrangement, suitable size 2 strip 100 Amp Al. busbar. powder painted with approved shade, including connection / interconnections with FRLS PVC insulated copper conductor single core cable of suitable size with four legs of 600mm long made out of angle iron frame of size 40mm X 40mm X 5 mm etc complete as required. The feeder pillar shall be mounted on suitable brick / cement concrete foundation 30 cms. below ground level and 30 cms. above ground including finishing etc. complete as required. Including providing and fixing following switchgears and accessories, i) MCB double pole 32 Amps, 50Hz of L&T/Havells/Siemens/C&S ii) DOL starter suitable for 2 HP single phase motor including DP Contactor, Thermal overload relay Capacitor 36-40 micro farad ON/OFF push botton complete wiring testing etc as required make L&T, Schneider, KSB/Kirloskar/Crompton/Lubi/CRI. |
| 11 | Providing of standby Single phase, 2 HP (1.5KW) submersible pump having head range 40-60 mtr flow range 190-30 LPM, having outlet size-32 mm, suitable for 6\\"(150 mm) dia bore well, 50 Hz including installation and lowering, testing and commissioning required etc as KSB/Kirloskar/Crompton/Lubi/CRI. make Please Enable Macros to View BoQ information |
