|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:lead upto 1 meter fromcutting edge All kinds of soil : |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 5 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 6 | Supply and Laying of Dry Stone Soiling including Hand Packing and ramming including all leads lifts Cost & Carriages of materials involved upto site of work complete Job |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: including all Carriages |
| 8 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 10 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 11 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. including all Carriages |
| 12 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 14 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level Including all Carriages |
| 15 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 17 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including all Carriages |
| 18 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. Including all Carriages 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 20 | Foundations, footings, bases of columns etc. for mass concrete. |
| 21 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 22 | Suspended floors, roofs, landings, balconies and access platforms. |
| 23 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 24 | Columns, pillars, piers, abutments, posts and struts. |
| 25 | Stairs (excluding landings) except spiral staircases. |
| 26 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all Carriages |
| 27 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 28 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 29 | Quarry |
| 30 | Nallah |
| 31 | Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like:Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 32 | Quarry |
| 33 | Nallah |
| 34 | Dry random rubble masonry with hard stone in foundation and plinth:With bond stone. |
| 35 | Quarry |
| 36 | Nallah |
| 37 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete in sub-structure and super structure |
| 38 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 39 | Riveted and bolted |
| 40 | Welded |
| 41 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. |
| 42 | 40mm thick with 20 mm nominal size stone aggregate. |
| 43 | 50 mm thick with 20mm nominal size stone aggregate. |
| 44 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown |
| 45 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 46 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 47 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 18mm thick |
| 48 | (Area of slab upto 0.5 sqm) |
| 49 | (Area of slab over 0.5 sqm) |
| 50 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 51 | Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. |
| 52 | 100x100x16 mm |
| 53 | 300x300x9.8 mm |
| 54 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 55 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (includuing hold fast lugs or with dash fasteners): |
| 56 | First class kail wood |
| 57 | Second class kail wood |
| 58 | Imported KD Wood |
| 59 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling , all complete as per direction of Engineer-in-charge. (Including Butt hinges and necessary screws and all Fittings).30mm thick |
| 60 | First class kail wood |
| 61 | Second class kail wood |
| 62 | Imported KD Wood |
| 63 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0mm thick glass panes |
| 64 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 65 | Applying 12mm Cement plaster of mix: including Curing and all materials |
| 66 | 1 : 4 ( 1 cement : 4 fine sand) |
| 67 | 1 : 6 ( 1 cement : 6 fine sand) |
| 68 | Applying 15mm Cement plaster on the rough side of single or half brick wall of mix: including Curing and all materials |
| 69 | 1 : 4 ( 1 cement : 4 fine sand) |
| 70 | 1 : 6 ( 1 cement : 6 fine sand) |
| 71 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 72 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 73 | With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 74 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 75 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade on new work Two or more coats. |
| 76 | White washing with lime to give an even shade on New Work (three or more coats) |
| 77 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 78 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 79 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 80 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick |
| 81 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 82 | Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats) |
| 83 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 84 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 85 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts incement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete,including disposal of rubbish to the dumping ground within 50 meters lead: |
| 86 | Door chowkhats |
| 87 | Window chowkhats |
| 88 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 89 | Re-fixing old glass panes with putty and nails |
| 90 | Providing and fixing brass curtain rods of wall thickness 1.25 mmwith two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20 mm diameter |
| 91 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 92 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 93 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 94 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 95 | Providing and laying of nallah muck in road including spreading Compacting levelling and carriage all jobs completely done |
| 96 | Supplying and stacking at site Graded crushed stone aggregate of size 63 mm to 45 mm Stone screening of size 13.2 mm nominal size (Type A) ,Moorum, Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.Including all Carriages |
| 97 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mixplant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge |
| 98 | Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen withmechanically operated spray unit fitted on bitumen boiler, cleaning andpreparing the existing road surface as per specifications.16.38.1 On W.B.M. @ 0.75 Kg/sqm. |
| 99 | Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen withmechanically operated spray unit fitted on bitumen boiler, cleaning andpreparing the existing road surface as per specifications.16.38.2 On bitumen surface @ 0.50 Kg/sqm. |
| 100 | Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom.with rapid setting16.39.2.1 On W.B.M. /W.M.M. @ 0.4 Kg/sqm. |
| 101 | Providing and laying of 50 mm thick BM with bitumen of VG-10 grade @3.5% and filler (lime) 34% by weight of total mix on prepared surfaces with specified grade stone aggregate. Hot mixing of bitumen with filler and stone aggregate. In hot mix plant transporting the mixed material with paver finisher and rolling with road roller as per IRC/ MOST/MORTH specification to achieve the desired density and compaction including cost and carriage involved from source to site of work completed |
| 102 | Providing and laying of 25 mm thick Semi Dense bituminous macadam course using mineral aggregate satisfying the gradation set out in specifications with 5% Binder content (by weight of total mix ) with the aid of hot mix plant and paver finisher including roller with road roller of 8 to 10 tone capacity to achieve the required density and compaction including cost and carriage of all materials and labour loading ,unloading and all taxes involved on account of labour and material including Bitumin complete |
| 103 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cumof fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. |
| 104 | Providing and Laying of RCC Spun Pipes NP2 Type including Trench excavation , laying inProper Slope , refilling and Providing RBM in Top and Bottom Cushions, and Carriages all Complete |
| 105 | 300 mm dia |
| 106 | 450 mm dia |
| 107 | 600 mm dia |
| 108 | 900 mm dia |
| 109 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. |
| 110 | Beyond 30 cm girth upto and including 60 cm girth. |
| 111 | Beyond 60 cm girth upto and including 120 cm girth. |
| 112 | Beyond 120 cm girth upto and including 240 cm girth. |
| 113 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 114 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 225mm |
| 115 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 116 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 117 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 118 | Providing and fixing toilet paper holder C.P. brass |
| 119 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 120 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilizedwith carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. including all Fittings Complete Job |
| 121 | 1216 (16mm OD) pipe |
| 122 | 1620 (20mm OD) pipe |
| 123 | 2025 (25mm OD) pipe |
| 124 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilizedwith carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:External work including trenching and refilling etc. complete including all Fittings Complete Job |
| 125 | 1216 (16mm OD) pipe |
| 126 | 1620 (20mm OD) pipe |
| 127 | 2025 (25mm OD) pipe |
| 128 | 2532 (32mm OD) pipe |
| 129 | Providing and placing on terrace (at all floor levels) Tripple Layer polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes Including all fittings and the base support for tank |
| 130 | Providing and Fixing of Soil Waste Pipe (10ft Long) 100mm dia P.V.C B Class Including all Fittings |
| 131 | Providing and Fixing of Soil Waste Pipe (10ft Long) 250mm dia P.V.C B Class Including all Fittings |
| 132 | Providing and Fixing of P.V.C Floor Trap with Jali |
| 133 | Providing and Fixing Stain less Steel heavy duty bib cock of approved make and Quality |
| 134 | Providing and Fixing Stain less Steel heavy duty Stop cock of approved make and Quality of required size at Site |
| 135 | Providing and Fixing of P.V.C Flexible Connection of required size at site of approved make and quality |
| 136 | Providing and Fixing Stain less Steel heavy duty Wall Mixer of approved make and Quality |
| 137 | Providing and Fixing Stain less Steel Soap Case of approved make and Quality |
| 138 | Providing and Fixing 1 HP Water Mortor of approved make and Quality |
| 139 | Providing and Fixing 25 Litre Capacity of Geyser of approved make and Quality including all Fittings |
| 140 | Providing and Fixing 50 Litre Capacity of Geyser of approved make and Quality including all Fittings |
| 141 | Providing and Fixing of 2KVA HKVA Inverter with Double Battery IMST 1500 - 150 AH Tubular Battery of approved make and quality including all Installtion fittings Complete Job |
| 142 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 143 | 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 144 | 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 145 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. |
| 146 | 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 147 | 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 148 | Providing and fixing plained eaves boarding.2nd class kail wood |
| 149 | 250x32 mm (nominal size ) |
| 150 | 300x40 mm (nominal size) |
| 151 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.Paanch Murabah |
| 152 | Providing and Fioxing of Hardware Items of Approved make and Quality |
| 153 | Aliminium Handle 6\\" |
| 154 | Aliminium Handle 4\\" |
| 155 | Tower Bolts 150mm |
| 156 | Tower Bolts 100mm |
| 157 | Link Locks |
| 158 | Hooks and Eye |
| 159 | Engagement of Labours |
| 160 | Engaement of JCB along with Tippers for removing of Debris, Slip Clearance and other Similar Works |
| 161 | Silt clearance from Drains.Including all Lead and Lifts and disposal of same and as per direction of Engineer-In-Charge at site |
| 162 | Providing and Erecting \\"W\\" Metal Beam Crash Barrier Comprising of 03 mm thick corrugated sheet metal beam rail , 70 cm above road /Ground Level , fixed on ISMC series Channel Vertical Post, 150x75x5 mm spaced 02mm Cetre to Centre , 1.8 m height, 1.10m below ground / road level all steel parts and fitments to be galvanized by hot dip process, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm, 330 mm long complete as per clause 811 |
| 163 | Items for Divisional Headquarter R&B Division Handwara |
| 164 | Providing and fixing wall panelling with [type of material PVC of approved quality, finish and shade, fixed over aluminium/wooden framework of [size and gauge] with necessary screws, adhesives, fasteners, edge sealing, finishing etc. complete in all respects as per drawings and directions of Engineer-in-Charge.” |
| 165 | PVC Edge bending tape 2.00 mm thick |
| 166 | Providing and fixing carved wallnut wood panelling in doors, of 25-35 mm thick seasoned deodar wood, carved to the approved design and pattern, including cutting, dressing, moulding, jointing, and fixing in proper alignment with necessary screws/adhesives. The wood shall be well-seasoned, termite and borer resistant, smoothly finished on exposed surfaces including required french spirit polish, and completed in all respects as directed by the Engineer-in-Charge |
| 167 | providing and fixing plain jaffri door and window shutters including bright or / and black enameled M.S. butt hinges with necessary screws 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with14.27.1 Second class teak wood sqm |
| 168 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.12.71.1 Changez Khani |
| 169 | Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 |
| 170 | Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thickconfirming to IS:14587 |
| 171 | Providing and fixing of circular steel sign board 600 mm dia, made of 2 mm thick MS sheet, stove enameled on both sides with retro-reflective sheeting (Class A/High Intensity) including lettering, symbol, MS angle iron frame 25x25x3 mm, supported on MS pipe post 75 mm dia, 12 SWG, 3.5 m long, fixed in cement concrete block 450x450x600 mm (1:2:4 mix) complete. |
| 172 | Providing and fixing rectangular information board size 900 x 600 mm made of 2 mm MS sheet with reflective sheeting, lettering/arrow, mounted on MS angle iron frame and supported on MS pipe 75 mm dia 3.5 m long, fixed in CC block 1:2:4 complete. |
| 173 | Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete.8.25.2 MDF Board IS: 1998 Marked |
| 174 | 12mm thick |
| 175 | 18mm thick |
| 176 | 25mm thick |
| 177 | Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 12 mm thickconfirming to IS:14587 Please Enable Macros to View BoQ information |
| 178 | Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 12 mm thickconfirming to IS:14587 Please Enable Macros to View BoQ information |