|
| 1 | Clearing & grubbing shrub, jungles including uprooting stumps of trees and trees below 1.0 m. girth and thick bushes including bamboo clamps based on pre-measurement including cess etc. complete as per direction of Engineer-in-Charge. |
| 2 | Flank dressing to proper camber including cost of all labour, all incidental charges, labour cess etc. complete as per direction of the Engineer-in-Charge. |
| 3 | Earth work excavation of any approved type of soil from approved borrow area by mechanical means, loading in to and transportation by mechanical means and unloading the soil within a distance of 5 km. on properly prepared and scientifically approved surface, protection works etc. with all labour and cost of transportation , with all leads, lifts and delifts including spreading and breaking the clods to maximum 5cm to 7cm in size including clearance of site, uprooting the stumps and trees, and dressing/cutting the earth to the required profile and slope for all heights of banks and slopes with required quality control test including construction, maintenance, watering , dewatering and lighting of haul road and borrow area and royalties, labour cess, T&P etc. complete, including mobilization and demobilization of men and machineries and all incidental charges and quality control testing charges required for completion of the work as per drawing, specification and direction of the Engineer.(Measurement will be taken on level section). Arrangement of earth is the responsibility of agency. |
| 4 | Quarrying, collecting, supplying and stacking of good quality of moorum and sand in regular box heap size of 1.50m X 1.50m X 0.44m to be measured as one cum and admixing moorum and sand in (70 : 30) proportion and laying in sub-base of road in layers not exceeding 150 mm thick with all leads, lifts and delifts including cost,conveyance, royalty, cess, including hire charges of T&P materials required for the work , watering and consolidation with P.R.R. , hire and running charges of machineries etc.complete as per specification and direction of the Engineer-in-Charge. |
| 5 | Collecting and supplying of approved quallity IRC Grade-II metal & chips from approved quarry including cost, carriage , royalty. Laying, spreading & compacting stones aggregate of specific size to water bound macadam specification including spreading in uniform thickness , hand packing rolling with 3 wheeled steel roller 8-10 ton in stage to proper grade and camber applying brooming requisite type screening, binding materials to fill up to the interstices coarse aggregate waterring & compacting to the required density per clause 404 of MOSRT & H specification of road & bridge works etc. complete ( 5th Revision ) output 360cum. |
| 6 | Collecting and supplying of approved quallity IRC Grade-III metal & chips from approved quarry including cost, carriage , royalty. Laying, spreading & compacting stones aggregate of specific size to water bound macadam specification including spreading in uniform thickness , hand packing rolling with 3 wheeled steel roller 8-10 ton in stage to proper grade and camber applying brooming requisite type screening, binding materials to fill up to the interstices coarse aggregate waterring & compacting to the required density per clause 404 of MOSRT & H specification of road & bridge works etc. complete ( 5th Revision ) output 360cum. |
| 7 | Collecting, conveying and supplying of good quality moorum from approved quarry and stacking at work site in a regular box heaps of 1.5x1.5x0.5m to be measured as 1 cum and conveying from stacks and spreading the moorum on the road surface in proper grade & camber including all labour cost, carriage, royalty of moorum with consolidation with PRR etc. complete as per direction by Engineer-in-charge. |
| 8 | Providing single under reamed pile foundation of 250mm dia including the labour charges for bending and binding and cost of reinforcement upto 4.00m depth from the specified level made of RCC M20 grade using 20mm and down graded hard granite crusher broken chips and sharp sand from approved quarry free from weather skin dust and other deleterious materials including mixing in concrete mixure, hoisting and laying concrete with all leads, lifts, delifts and placing over scientifically approved surface, supplying T&P including watering and curing for specified days with cost of all materials, carriage, royalty, labour cess, hire and running charges of machineries, dewatering by suitable means etc. comlete as per specification and direction of the Engineer-in-charge. |
| 9 | Providing and laying Cement Cconcrete M-20 with using 20mm and down graded size Crusher broken hard granite chips, sharp sand of approved grading and quality conforming to the specification, mixing by concrete mixer and placing manually on approved surface, vibrating concrete by mechanical means, supplying T&P, curing for specified days by suitable means, supervision charges including mobilization and demobilization with cost of construction and dismantling of gangways and scaffolding, chute with cost, conveyance, labour cess, royalties of all materials, site illumination hire and running charges of machineries required for the work as per approved drawing and specification with all cost incidental to the work etc. complete including labour cess as per the direction of the Engineer-in-Charge |
| 10 | Supplying cutting bending binding and placing in position uncoated HYSD bar reinforcement complete as per drawing and technical specification including all labours, cost, conveyance, labour cess etc. complete as directed by Engineer-in-charge. |
| 11 | Brick work with Fly ash bricks 25 cm x 12 cm x 8 cm having crushing strength not less than 75 Kg/cm2 with dimension tolerance ± 8 percent in cement mortar (1:6) including curing, etc. with all cost, conveyance, royalty, labour, T&P, etc. complete including labour cess as per the direction of the Engineer-in-Charge. |
| 12 | 12mm thick cement plaster (1:6) finished smooth to inside/outside smooth surface of brick walls after racking out joints including watering and curing with the cost and conveyance of all materials and labour with T&P required for the work with royalties etc. complete as per direction of Engineer-in-Charge. |
| 13 | Rigid and smooth centering and shuttering for R.C.C works including false works and dismantling them after casting including cost of materials, labour css etc. complete as per direction of Engineer-in-charge. |
| 14 | Painting wall surface with weather 2 coats of approved shade after cleaning surface with surf or soda free from dust and extraneous materials including cost, conveyance and cost of labour etc. complete as per the direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
