|
| 1 | TABLE BEDSIDE STEEL : FD/E6/MAP/15(R) S & F following components of table bed side including dismantling taking out carefully & replace old components of table bed side. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 400 |
| 2 | Replacement of old existing broken top of table bed side of any description with S&F new table top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 3 | All as per item 1.01 here in but for sides of table bedside. |
| 4 | S & F new legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg. |
| 5 | S & F new CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg. |
| 6 | S & F new 6mm commercial ply at back of the table bed side steel fitted with screws as shown on drg. |
| 7 | Replacement of Upper drawer made out of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 8 | Replacement of Lower drawer made of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. ( |
| 9 | S & F new telescopic channel (Make :- Hettich/ Ozone/ Epco). |
| 10 | S & F new rubber shoes 18mm square of high quality placed in position as shown in drg. |
| 11 | Welding work wherever required as directed by EIC and GE. |
| 12 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table bed side, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 13 | TEAPOY VERANDAH : FD/E6/MAP/17 S & F following components of Teapoy Verandah including dismantling taking out carefully & replace old components of Teapoy Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 80 |
| 14 | Replacement of old existing broken table top of any description with S&F new table top of 18mmthick Rosewood/Teak Gold Prelaminated MDF Board with 3mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 15 | S & F new 18mm sq MS pipe for legs of teapoy welded to adjacent part as shown in drg. |
| 16 | S & F new 5mm dia MS bars at base tray with proper welding with frame of tray as shown in drg. |
| 17 | Replacement of rubber shoe with S & F new hard rubber shoe of superior quality. |
| 18 | Welding work wherever required as directed by EIC and GE. |
| 19 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Teapoy Verandah MAP, paint them through a spray machine to obtain a high gloss finish similar to new furniture |
| 20 | ALMIRAH STEEL LARGE 1/2 HANGING 1/2 SHELVING : FD/E6/MAP/18 S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 320 |
| 21 | Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/ Harrison/ Nova) |
| 22 | Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah large |
| 23 | Replacement of shelf of almirah with S&F new shelf made out of 1.00 mm thick MS sheet complete fitting with nut & washer all as shown on drg, specified and directed . |
| 24 | Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size) |
| 25 | Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godraj patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE. |
| 26 | Replacement of legs of steel almirah large with S&F new leg. |
| 27 | Replacement of hinges of steel almirah large with S&F new hinges SS (Make :- Hettich/ Ozone/ Epco) complete all as shown on drg, specified and directed. |
| 28 | Welding work wherever required as directed by EIC |
| 29 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Almirah, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 30 | STEEL ALMIRAH MED : FD-1032, FD-243, FD-104(M) : S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 400 |
| 31 | Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah Steel Med & suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/ Harrison/ Nova) |
| 32 | Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godrej patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE. |
| 33 | Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah medium. |
| 34 | Replacement of legs of steel almirah medium with S&F new legs complete all as shown on drg, specified and directed. |
| 35 | Replacement of shelf of steel almirah medium with S&F new shelf complete all as shown on drg, specified and directed . |
| 36 | Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size) |
| 37 | Cleats (New cleats must be made of 2mm thick MS sheet) |
| 38 | Welding work wherever required as directed by EIC |
| 39 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Steel Almirah Med, paint them through a spray machine to obtain a high gloss finish similar to new furniture |
| 40 | SHOE RACK STEEL : FD-E6/MAP/02 ® S & F following components of shoe rack including dismantling taking out carefully & replace old components of Shoe Rack. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 400 |
| 41 | Main frame of Rack shoe steel 25mm dia pipe |
| 42 | 3mm dia MS wire mesh (9 Nos,equidistant)and 3mm dia MS wire (3 Nos,equidistant) size 700mm x 300mm. All as shown on drg. |
| 43 | PVC Shoe |
| 44 | Welding work wherever required as directed by EIC |
| 45 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Shoe Rack Steel paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 46 | TABLE COMPUTER : FD/E6/MAP/03 S & F following components of table computer including dismantling taking out carefully & replace old components of table computer. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 125 |
| 47 | Replacement of old existing broken top of table computer of any description with S&F new table top of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 48 | All as per srl item No. 6.01 here-in-before but bottom shelf of Table computer. |
| 49 | All as per srl item No. 6.01 here-in-before but vertical board on side of Table computer. |
| 50 | All as per srl item No. 6.01 here-in-before but keyboard tray of Table computer. |
| 51 | All as per srl item No. 6.01 here-in-before but drawer of Table computer. |
| 52 | All as per srl item No. 6.01 here-in-before but pull out mouse tray of Table computer. |
| 53 | Removing of old U/S telescopic channel of key board and S & F new stainless steel telescopic channel to Table computer. (Make :- Hettich/ Ozone/ Epco) |
| 54 | S&F new knobs to Table computer. |
| 55 | S&F new handles to Table computer. |
| 56 | S&F new Nylon buffers to Table computer. |
| 57 | Welding work wherever required as directed by EIC and GE. |
| 58 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Table Computer paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 59 | CHAIR WRITING OFFICERS : FD/E6/MAP/12 S & F following components of chair including dismantling taking out carefully & replace old components of chair Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 65 |
| 60 | Removing U/S damaged Seat & back of Chair writing. S & F new seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine. |
| 61 | Removing old U/S arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed. |
| 62 | Taking out U/S /broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC. |
| 63 | Welding work wherever required as directed by EIC |
| 64 | Replacement of shoe with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 65 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Writing Officers (MAP) paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 66 | CHAIR COMPUTER : FD/E6/MAP/01 :S & F following components of Chair including dismantling taking out carefully & replace old components of Chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 100 |
| 67 | Removing U/S damaged Seat & back of Chair computer, S & F new seat and back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam (Make: Sleepwell/ Springwell/Kurl-on) shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine. |
| 68 | Removing old U/S arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert and shall be weather and scratch resistant. |
| 69 | Removing U/S 5 star base and S&F new SS 5 star base suitable for chair computer. |
| 70 | Removing U/S castor twin wheels and S&F new castor twin wheel suitable for chair computer. |
| 71 | Removing U/S adjustable tilting mechanism and S&F new adjustable tilting mechanism shall be forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair. |
| 72 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Computer paint them through a spray machine to obtain a high gloss finish similar to new furniture |
| 73 | DRESSING TABLE (LADIES) INCLUDING STOOL FD/MAP-II/07 Dismantle, take out carefully & replace old components of table dressing ladies. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty - 220 |
| 74 | Replacement of handle with S&F new chromium plated handle as approved by the Engineer-in-Charge of best quality. |
| 75 | M & L for replacement of U/S sliding channel. |
| 76 | M & L for replacement of U/S 6mm thick back ply wood of mirror. |
| 77 | Replacement of back of table dressing ladies with S&F new back of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. ( |
| 78 | Replacement of broken top of table dressing ladies of any description with S&F new top of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 79 | Replacement of side of table dressing ladies with S&F new side of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. (Make:- Century or equivalant as approved by GE). |
| 80 | Replacement of door shutter of table dressing ladies with S&F new door shutter of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. |
| 81 | Replacement of drawer of table dressing ladies with S&F new drawer as per Drg |
| 82 | Replacement of wheels of Stool dressing with S&F new wheels as per Drg |
| 83 | Replacement of hinges of table dressing ladies with S&F new hinges as per Drg |
| 84 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 85 | Replacement of cushion of Stool dressing with S & F PU foam cushion with 40 Density (Make- Sleepwell/Godrej/Kurlon) with Tapestry cloth as approved by EIC/GE of rate not less than Rs 250/RM. |
| 86 | Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror 5mm thick (make - Modi gurard/Saint Gobin) made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. |
| 87 | Polishing one coat to old and two coats to new surfaces to table dressing ladies with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 88 | SIDE BOARD : FD-26(M), FD-241, FD-371, FD-1112: Dismantle, take out carefully & replace old components of side board. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty - 120 |
| 89 | Removing of old U/S top from Side board and S&F new top of Side board with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 90 | Replacement of bottom & S & F new bottom |
| 91 | Replacement of side & S & F new side |
| 92 | Replacement of shelf with S&F 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 93 | Replacement of partition. |
| 94 | Replacement of back ply with S & F new 6mm thick plywood commercial both side Grade I (with BWR Resin). |
| 95 | Replacement of Bottom long Stiffner with S & F new M.P. Teak Wood Stiffner |
| 96 | Replacement of Bottom short Stiffner with S & F new M.P. Teak Wood Stiffner |
| 97 | Replacement of Legs with S & F new M.P Teak Wood Legs |
| 98 | Replacement of knobs with S & F new 25 mm dia brasic CP complete. |
| 99 | Replacement of locks with S & F new locks brass (Make :- Godraj/ Harrison/ Nova) |
| 100 | Replacement of complete drawers with S & F new complete drawers (as per shown on drg) made of 1st class teak wood |
| 101 | Replacement of Piano type hinges with S & F new Piano type hinges light weight |
| 102 | Polishing one coat to old and two coats to new surfaces to Side Board with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 103 | HAT STAND WITH MIRROR : FD-23(M), FD-233, FD-361 Dismantle, take out carefully & replace old components of hat stand. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 50 |
| 104 | M & L for replacement of Base made of 18/19mm thick Rosewood/Teak Gold Prelaminated MDF Board with 6mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 105 | Brass pegs with screws size and shape as per drg. |
| 106 | Mirror 5.5 mm thick size as per drg |
| 107 | Polishing one coat to old and two coats to new surfaces to hat stand mirror with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 108 | BIN LINEN MULTIPURPOSE: FD/E6/MAP/09 Dismantle, take out carefully & replace old components of bin linen multipurpose. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty - 150 |
| 109 | Removing of old U/S top from bin linen multipurpose and S&F new top of bin linen multipurpose with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 110 | Removing of old and U/S door shutters of bin linen multipurpose S&F new door of bin linen multipurpose with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 111 | Removing of old U/S hingses and S & F new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed. |
| 112 | Removing of old broken handles and S & F of new chromium plated steel handles to bin linen multipurpose as per shown on drg and as directed. |
| 113 | Removing of old magnetic catcher and S & F of new magnetic catcher to bin linen multipurpose as per size and design shown on drg complete all as specified and directed. (Make:- Ebco/Hettich). |
| 114 | Removing of old U/S side and S & F new side made out of S&F new top of table with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 115 | Removing of old U/S back ply of bin linen multipurpose and S & F new back ply of same size made out of 12mm thick commercial plywood (ISI marked) all as shown in drg and as directed. |
| 116 | Replacement of U/S drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board as approved by EIC/GE and including handle Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drg including one coat of lacquer polish to old and two coats to new surfaces. |
| 117 | Removing of old U/S leg from bin linen multipurpose and S & F new Ist class hard wood teak leg to side board all as shown on drg and as directed. |
| 118 | Polishing one coat to old and two coats to new surfaces to bin linen multipurpose with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 119 | TEAPOY : FD-34(M), FD-232, FD-278, FD-382 Dismantle, take out carefully & replace old components of teapoy. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty - 40 |
| 120 | Replacement of old existing broken top of teapoy of any description with S&F new top of Teapoy with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 121 | Replacement of leg with S&F new teak wood leg made to shape. |
| 122 | Replacement of long rail with S&F new teak wood long rails made to shape. |
| 123 | Replacement of short rails with S&F new teak wood short rails made to shape. |
| 124 | Replacement of stiffener with S&F new teak wood stiffener made to shape. |
| 125 | S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing |
| 126 | Polishing one coat to old and two coats to new surfaces to teapoy with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 127 | CHAIR DINING OFFICER (MAP) FD/MAP-II/04 ,FD-E6-MAP-10 Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty - 470 |
| 128 | Removing old broken/U/S front legs from chair dining and S & F new front legs of Ist class hard wood teak wood as per shape and size shown in drawing complete all as specified and directed. |
| 129 | All as per srl item No. 14.01 here-in-before but rear leg. |
| 130 | All as per srl item No. 14.01 here-in-before but front/ back/ side rail. |
| 131 | All as per srl item No. 14.01 here-in-before but back teak wood strip of size 30x15mm of suitable length. |
| 132 | All as per srl item No. 14.01 here-in-before but stiffner. |
| 133 | S & F new wooden bracket/corners of suitable size made of Ist class hard wood teak to Chair dining cushioned and screwd with railing for extra strength including lacquer polish complete all as directed. |
| 134 | Removing old U/S PU foam cushioned seat from existing chair dining cushioned and S & F new 75 mm thick ,40 density PU foam seat of (Make- Sleepwell/Godrej/Kurlon) to chair dining duly covered with tapestry cloth of range not less than Rs.250.00 per meter, colour, shade and quality of tapestry Cloth shall be as approved by EIC & GE complete all as specified and directed. |
| 135 | Polishing one coat to old and two coats to new surfaces to Chair Dining Officer (MAP) with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 136 | BED HARD WITH PLYTOP : (FD/MAP/E6/08 (R) |
| 137 | M & L 18 mm thicik Prelaminated MDF, exterior grade, prelaminated both side with decorative choice lamination of size 630 X 185 mm, screwed to MS strip, arc welded to 18 mm size rectangular pipe as in head board of Bed hard with plytop including taking out old unserviceable head board complete all as specified and directed. |
| 138 | M & L 18 mm thicik Prelaminated MDF, exterior grade, prelaminated both side with decorative choice lamination of size 630 X 310 mm, screwed to MS strip, arc welded to 18 mm size rectangular pipe as in foot board of Bed hard with plytop including taking out old unserviceable foot board complete all as specified and directed. |
| 139 | M & L 45 X 20 X 5 mm size MS flat iron for fixijng head/foot board, arc welded to rectangular pipe of bed hard, apply two coats of synthetic enamel paint over a coat of red oxide primer to MS flat after welding including taking out old unserviceable MS strip of any size complete all as specified and directed. |
| 140 | M & L 25 X 25 X 1.25 mm thick MS square tube, 850mm long, as in stiffner of bed hard, welded to long rail apply two coats of synthtic anamel paint over a coat of red oxide primer to MS pipe after welding including taking out old unserviceabnle MS pipe of any size complete all as specified and directed |
| 141 | M & L 12 mm thick ply wood to BWR grade confirming to IS:303 as in bed hard screwed to stiffner including taking out old unserviceable plywood complete all as specified and directed by Engineer-in-Charge |
| 142 | S & F rubber shoes suitable for 38 X 38 mm MS square tube as leg of bed hard complete all as specified and directed. |
| 143 | Supply only GI nut and bolt of size of 75mm X 7mm, conforming to IS.1239 (Part II) 1982, all as specified. |
| 144 | M & L preparation of old treated steel surfaces of bed hard MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified. |
| 145 | PEG TABLE : FD-25(M), FD-236, FD-277, FD-384 Dismantle, take out carefully & replace old components of peg table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. Qty-800 |
| 146 | Replacement of old existing broken top of peg table of any description with S&F new top of peg table with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 147 | Replacement of leg with S&F new teak wood leg made to shape. |
| 148 | Replacement of long rail with S&F new teak wood long rails made to shape. |
| 149 | Replacement of short rails with S&F new teak wood short rails made to shape. |
| 150 | S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg. complete all as specified and directed. |
| 151 | Polishing one coat to old and two coats to new surfaces to peg table with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 152 | TABLE CENTER : FD-29(M), FD-235, FD-274 Dismantle, take out carefully & replace old components of table center. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. Qty-330 |
| 153 | Replacement of old existing broken top of table center of any description with S&F new top of Table Center with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4 mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 154 | Replacement of leg with S&F new teak wood leg made to shape. |
| 155 | Replacement of long rail with S&F new teak wood long rails made to shape. |
| 156 | Replacement of short rails with S&F new teak wood short rails made to shape. |
| 157 | Replacement of stiffener with S&F new teak wood stiffener made to shape. |
| 158 | S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing. |
| 159 | Polishing one coat to old and two coats to new surfaces to table center with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 160 | TABLE WRITING : FD-33, FD-249, FD-275 Dismantle, take out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-75 |
| 161 | Dismantling, taking out carefully & replacement of old existing broken top of Table of any description & replacement of the same with S&F new top of table with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE (Make:- Century or equivalant as approved by GE). |
| 162 | Replacement of shutters (complete) with S&F 18mm thick Rosewood/ Rosewood Prelaminated MDF exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 163 | Replacement of TOP long rails with S&F new TOP long rail made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge. |
| 164 | Replacement of TOP short rail with S&F new TOP short rail of made out of Ist class Hard Wood (teak wood) complete as shown on drgs, specified and directed by the EIC/GE |
| 165 | Replacement of drawer with knob Chromium plated 40mm dia with S&F complete new drawer made out of Ist class hard wood (teak wood) with knob Chromium plated 40mm dia as approved by GE complete all as shown on drgs, specified and directed by the EIC/GE |
| 166 | Replacement of Leg with S&F new Leg with made out Ist class MP (teak wood) complete all as shown on drgs, and directed by the Engr-in-Charge. |
| 167 | Replacement of bottom centre stiffener with S&F new bottom centre stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge. |
| 168 | Replacement of bottom side stiffener with S&F new bottom side stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge. |
| 169 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 170 | Polishing one coat to old and two coats to new surfaces to Table Writing with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 171 | SOFA SET 5 SEATER : FD-281/373 |
| 172 | M & L for removal of existing broken/unserviceable leg of sofa set 3 seater with arms and replacing the same with new leg 1st class hard wood (Teak) of size & dimension of the parts shall be of rthe same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed. |
| 173 | M & L for removal of existing broken/unserviceable side rail of sofa set 3 seater with arms and replacing the same with new side rail 1st class hard wood (Teak) of size & dimension of the parts shall be of rthe same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed. |
| 174 | M & L for removal of existing broken/unserviceable front long rail of sofa set 3 seater with arms and replacing the same with new long rail 1st class hard wood (Teak) of size & dimension of the parts shall be of rthe same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed. |
| 175 | M & L for removal of existing broken/unserviceable stiffner of sofa set 3 seater with arms and replacing the same with new stiffner 1st class hard wood (Teak) of size & dimension of the parts shall be of rthe same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed. |
| 176 | M & L for removal of existing broken/unserviceable leg of sofa single seater with arms and replacing the same with new leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed. |
| 177 | M & L for removal of existing broken/unserviceable side rail of sofa single seater with arms and replacing the same with new leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed. |
| 178 | M & L for removal of existing broken/unserviceable front long rail of sofa single seater with arms and replacing the same with new leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed. |
| 179 | M & L for removal of existing broken/unserviceable stiffners of sofa single seater with arms and replacing the same with new one1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed. |
| 180 | M & L for supply of new cushions for sofa set 5 seater (set consisting of 10 cushions) of size 560 X 530 X 100 mm thick 40 dencity of make sleepwell or equivalent as approved by GE and duly covered with tapestry cloth costing not less than Rs. 350/- per mtr over a cover of long cloth complete all as specified and directed. |
| 181 | TABLE DINING FOR 6/4 PERSONS : FD/MAP-II/03 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty-124 |
| 182 | Replacement of old existing broken top of table dining 6 persons of any description with S&F new top of table dining 6 persons with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 183 | All as per Srl item No. 20.01 here-in-before but top of table dining 4 persons. |
| 184 | L-Shape wooden corner of size 4\\" x 4\\" x 1\\" to the Table between legs and rail to be fixed with screw. |
| 185 | Replacement of leg with S&F new teak wood leg made to shape |
| 186 | Replacement of long rail of table dining 6 Persons with S&F new teak wood long rails made to shape |
| 187 | Replacement of long rail of table dining 4 Persons with S&F new teak wood long rails made to shape |
| 188 | Replacement of short rails with new teak wood short rails made to shape |
| 189 | S & F new Nylon Buffer of superior quality with suitable screws for fixing. |
| 190 | Polishing one coat to old and two coats to new surfaces to table dining 6 persons with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 191 | All as per Srl item No. 20.09 here-in-before but table dining 4 persons. Please Enable Macros to View BoQ information |
