|
| 1 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry and pointed white or coloured cement to match over and including15mm thick screed bed in CM 1:6 after dismantling of existing floor tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 2 | S&F coloured glazed ceramic tile in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat including dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding (but not backing) and removing upto Brick wall surface and removal of rubibish out side the MD land complete all as specified and as directed. |
| 3 | S&F Ultra charged Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm but n. exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc including dismantling of existing old floor tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 4 | S&F Ultra charged Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm but n. exc 1.00 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed of 10mm thick in CM 1:4 etc including dismantling of existing old floor tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 5 | M&L for coloured vitrified heavy duty ceramic scratch and stain resistant external tiles of size 40cmx40cmx12mm thick thick laid over and including 15mm thick CM (1:4) set jointed and pointed in neat cement slurry in floors including dismantling of old existing tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 6 | M&L 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed. |
| 7 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed of 15mm thick in CM 1:6 etc including dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade of complete all as specified and as directed..complete all as specified and as directed.. |
| 8 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc including dismantling of old existing floor tiles complete all as specified and as directed..Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge. |
| 9 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 10 | S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including scaffolding and sdafety precautions to fix grills at G+3 storied building complete all as specified and as directed. |
| 11 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zincchrome primer complete all as specified and as directed. |
| 12 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of size exc. 0.5 sqm and not exc. 1 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 13 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of exc. 1 sqm and not exc. 1.5 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 14 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of size exc. 1.5 sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 15 | M&L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zincchrome primer complete all as specified and as directed. |
| 16 | Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 17 | M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed |
| 18 | M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care puttyafter preparation of surface complete all as specified and as directed. |
| 19 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed. |
| 20 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | M&L in repair Prelaminated particle board 25mm in thicknesss , interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 23 | S&F stainless steel 100 mm butt hinges for doors complete all as specified. |
| 24 | S&F 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified. |
| 25 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified. |
| 26 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified. |
| 27 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard 3 track sliding sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified. |
| 28 | Supply and fixing Powder coated aluminium window shutters, sliding type 3 track aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller etc. complete all as specified |
| 29 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 30 | S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified. |
| 31 | S&F in tinted sheet glass ordinary quality 4mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frameand wooden beading in metal frame complete all as specified. |
| 32 | S&F in repair 25mm dia stainless steel curtain rod including 2 Pair of fancy type bracketst ( average length of curtain rod varies from 0.75 to 1.8m length) fixed with for each piece of curtain rod 02 nos to 04 nos as per site requirement mild steel screws complete all as specified |
| 33 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap complete all as specifed and as directed. |
| 34 | S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 35 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed |
| 36 | S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type/ Pedstal type WC complete all as specified. |
| 37 | S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified. |
| 38 | S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 39 | S&F in repair 32 mm dia PVC collapsible waste pipe for WHB/Kitchen sink complete all as specified. |
| 40 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets. |
| 41 | S&F anodised aluminium snap grid frame work for false ceiling all as specified. |
| 42 | S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling/ wall panelling grid made of Aluminium/G.I./M.S. after dismantling of old existing false ceiling/wall panelling incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 43 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 44 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified. |
| 45 | S & F of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified. |
| 46 | S & F of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified. |
| 47 | S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed. |
| 48 | S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 49 | S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed. |
| 50 | S&F of 15 mm CP extension nipple complete all as specified and as directed. |
| 51 | S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 52 | S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 53 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 54 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 55 | S&F in repair PVC bends any radius 75mm dia |
| 56 | S& F in repair PVC bends any radius 110mm dia |
| 57 | S& F in repair PVC bends with Access Door 75mm dia |
| 58 | S& F in repair PVC bends with Access Door 110mm dia |
| 59 | S& F in repair PVC Single \\"Y' Junction 75mm dia |
| 60 | S& F in repair PVC Single \\"T' Junction 110mm dia |
| 61 | S& F in repair PVC Single \\"T' Junction with Access Door 110mm dia |
| 62 | S&F in repairs bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe. |
| 63 | S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 64 | S&F in repair 15 mm bore diameter brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule. |
| 65 | S&F in repair 15 mm bore diameter brass CP wall mixture any type complete all as specified and as directed. |
| 66 | S & F in repair pillar tap swan neck fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed. |
| 67 | S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed . |
| 68 | S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed . |
| 69 | S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed. |
| 70 | S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 71 | S&F in repairs 100mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement complete all as specified and as directed. |
| 72 | S&F in repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 73 | S & F in repairs beveled edge looking mirror of 5.5 mm thick 600mmx450mm of selected quality mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 74 | S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified. |
| 75 | S & F PVC liquid soap dispenser fixed with screws on walls complete. |
| 76 | S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 77 | S&F in repairs SS soap dish 100mm Complete all as specified and directed.\\" |
| 78 | S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified |
| 79 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified |
| 80 | S&F Tank union 25mm internal dia complete all as specified and as directed |
| 81 | S&F 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-210gms) complete, fixed in repairs, all as specified. |
| 82 | S&F 25 mm internal bore nipple suitable for HDPE water tank. (Min wt 45 gms). |
| 83 | S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete all as specified. |
| 84 | Materials and labour for cleaning of water tanks of capacity exceeding 250 litres and not exceeding 500 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed. |
| 85 | Materials and labour for cleaning of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed. Please Enable Macros to View BoQ information |
