|
| 1 | Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 2 | Supply, lay, connect and testing of GI Tubing, 15 mm dia, medium grade with all fittings (ISI Marked) and fixing to wall and ceiling or laid in floor, complete all as specified and as directed. |
| 3 | Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store , complete all as specified and as directed. |
| 4 | Supply, lay, connect and testing of GI Tubing, 20 mm dia, medium grade with all fittings (ISI Marked) and fixing to wall and ceiling or laid in floor, complete all as specified and as directed . |
| 5 | Fixing only 15 mm bore tubes, any grade, to wall and ceiling or laying in floor etc ,complete all as directed by Engineer-in-Charge. |
| 6 | Fixing only 20 mm bore tubes, any grade, to wall and ceiling or laying in floor etc ,complete all as directed by Engineer-in-Charge. |
| 7 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing etc, and making good, cutting not exceeding 10cm girth of brick wall , complete all as specified and as directed. |
| 8 | Taking down eaves gutters and rainwater pipes( any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. |
| 9 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and as directed. |
| 10 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and as directed. |
| 11 | S&F 110 mm dia PVC (SWR) bends any radius , complete all as specified and as directed. |
| 12 | S&F 75 mm dia PVC (SWR) bends any radius , complete all as specified and as directed. |
| 13 | S&F in repair's vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 , securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc., complete all as specified and as directed. |
| 14 | S&F in repair's Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap, complete all as specified and as directed. |
| 15 | S&F in repair's fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe of 15 mm bore pipe etc., complete all as specified and as directed. |
| 16 | S&F in repair's vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of cement concrete bedding , complete all as specified and as directed. |
| 17 | S&F in repair's vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe), complete all as specified and as directed. |
| 18 | S&F in repair's seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device, complete all as specified and as directed. |
| 19 | S&F in repair's flushing cistern of 10 litre capacity PVC valveless syphonic action type , high or low level, white with inlet ball valve, float and handle, inlcuidng brackets, complete all as specified and as directed. |
| 20 | S&F in repair's swivel shower of PTMT with shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour for fixing to 15mm GI pipe (minium wt 40 gms), complete all as specified and as directed. |
| 21 | S&F in repair's grating doom 125mm dia with waste hole of PTMT (Minium weight 40 gms), complete all as specified and as directed. |
| 22 | S&F in repair's grating doom 100mm dia with waste hole of PTMT (Minium weight 25 gms), complete all as specified and as directed. |
| 23 | S&F in repair's stainless steel kitchen plate rack 1 mm thick of overall size 900mmx750mmx250mm, complete as directed by Engigeer-in-Charge. |
| 24 | M&L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of existing brick work, complete all as specified and as directed. |
| 25 | S&F in repair's brass Chromiun Plated towel rail, 20mm dia, D type , 60 cm long between flanges, complete all as specified and as directed. |
| 26 | S&F in repair's toilet paper holder of viterous china box type white coloured fixed to walls with chromium plated brass screws CP brass fixed to walls etc, complete all as specified and as directed. |
| 27 | S&F in repair's brass CP shower rose 125mm size, complete all as specified and as directed. |
| 28 | S&F in repair's sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. |
| 29 | S&F in repair's 15 mm dia PVC connection of length 450mm long, complete all as specified and as directed. |
| 30 | S&F in repair's 600x450 mm beveled edge looking mirror of 5 mm thick selected quality glass mounted on 6 mm thick AC building board fixed to wall by wooden plug with chromium plated brass screw and cup washer, complete all as specified and as directed. |
| 31 | S&F in repair's Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed foriron pipe or for brass ferrule and fixing to 15 mm bore pipe etc., complete all as specified and as directed. |
| 32 | S&F in repair's 15mm bore Brass CP mixer for mixing hot & cold water screwed dow for iron pipe, complete all as specified and as directed. |
| 33 | S&F in repair's fancy type, chromium plated, stop valves/angle valve of 15 mm bore, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for union, complete all as specified and as directed. |
| 34 | S&F in repair's gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 20mm bore, complete all as specified and as directed. |
| 35 | Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc., complete all as specified and as directed. |
| 36 | M&L for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on fair face of brickwork and finishing surface even and smooth without using extra cement, including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed. |
| 37 | Preparation of new plastered or unplastered surfaces of wall and apply two coat of oil bound distemper over and including a coat of alkali resistant primer coating including provn of 1 mm thick wall care putty, complete all as specified and as directed. |
| 38 | M&L for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I ,including ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore, thread or groves of a screw type tank cover and fixed and including dismantling of existing water tanks and removing to store, complete all as specified and as directed. |
| 39 | S&F in repair's flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, complete all as specified and as directed. |
| 40 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including Screed bed 20 mm thick in cement mortar 1:4 including dismantling existing stone slabs and tiles of any description or thickness,laid,bedded in any mortar, complete all as specified and as directed. |
| 41 | S&F in repair's sheet glass assembly consisting 5.5mm thick sheet glass shelf 100mm side with chromium plated bracket guard and railing 60 cm long, complete all as specified and as directed. |
| 42 | S&F in repair's health faucet (ABS body) mild steel Chromium plated suitable for 15mm dia pipe with 1.25meter long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and as directed. |
| 43 | S&F in repair's PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed. |
| 44 | S&F in repair's PVC waste pipe of 32 mm dia and 80mm long , complete all as specified and as directed. |
| 45 | S&F in repair's 40mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 46 | S&F in repair's 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 47 | M&L for preparation of old surafces of walls and applying two coat of white wash on wall, complete all as specified and as directed. |
| 48 | M&L for prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces, complete all as specified and as directed. |
| 49 | M&L for prepration of old plastered / decorated surfaces of walls and applying two coat of oil bound distemper on plastered/decorated wall surfaces, complete all as specified and as directed. |
| 50 | M&L for preparation of old surafces of ceiling and applying one coat of white wash on ceiling, complete all as specified and as directed. |
| 51 | M&L for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I ,including ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore, thread or groves of a screw type tank cover and fixed and including dismantling existing water tanks of 500 litres capacity and removing to store, complete all as specified and as directed. |
| 52 | S&F in repair's Bib tap standard of PTMT , 15mm dia, any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90 gms), complete all as specified and as directed by Engineer-in-Charge. |
| 53 | S&F in repair's angle stop valve of PTMT, 15mm dia, any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90 gms), complete all as specified and as directed by Engineer-in- Charge. |
| 54 | M&L for glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming to IS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and as directed. |
| 55 | M&L for Non - skid Ceramic tiles, coloured,7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, conforming to IS 15622,Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and as directed. |
| 56 | M&L for Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, conforming to IS 15622,Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and as directed. |
| 57 | M&L for Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, conforming to IS 15622,Grade B IIa, on vertical surface of wall such as dados,skirting etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and as directed. |
| 58 | Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) , complete all as specified and as directed. |
| 59 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) , complete all as specified and as directed. |
| 60 | Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each, complete all as specified and as directed. |
| 61 | S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and as directed. |
| 62 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 63 | S&F medium wieght, stainless steel butt hinges ,100 mm size , (ISI Mark, as per ISI Specification), complete all as specifed and as directed. |
| 64 | S&F 125 mm long aluminium, anodised, barrel tower bolts of extruded section (ISI Mark, as per ISI Specification) and fixed, complete all as specified and as directed. |
| 65 | S&F 100 mm long aluminium handles, cast type, anodised (ISI Mark, as per ISI Specification) and fixed, complete all as specified and as directed. |
| 66 | M&L for Vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over screed bed or bedding layer 15 mm thick in cement mortar 1:4 after dismantling of existing floor tiling including cement mortar bedding (but not backing), rubbish of the premises, complete all as specified and as directed. |
| 67 | M&L for Vitrified ceramic tiles light shade as in skirting of specified height cut from 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm , set and jointed in neat cement slurry and pointed in white or coloured cement over screed bed or bedding layer 10 mm thick in cement mortar 1:3 after dismantling existing floor tiling including cement mortar bedding (but not backing), removing rubbish of the premises, complete all as specified and as directed. |
| 68 | M& L for 50mm thick plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection laid to slop 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and incl necessary form work, providing 6mm thick joint of plinth protection duly filled with mastic filling of one part of hot bitumen85/25 grade and three part of fine sand (all by weight) including roughing of old concrete by picking, complete all as specified and as directed. |
| 69 | S&F in repair's 20mm bore, ball valves high pressure PTMT, epoxy coated aluminium rod & high density plastic ball, complete all as specified and as directed. |
| 70 | S&F in repair's 15mm bore, ball valves high pressure PTMT, eposy coated aluminium rod & high density plastic ball, complete all as specified and as directed. |
| 71 | Disconnecting water tank from roof slab/staging upto tripple story building , float valve with float arm and outlet pipe from PVC service water tank, empting, cleaning and removing all scales and dirt etc from tank and finally washing the internal surface with bleaching powder, closing wash outlet, refixing water tank in original position. incl replacement of old tank nipple, & GI union, including writing \\"Cleaned on dt___ and due date _____for cleaning, using paint , for tank capacity upto 500 litres ,complete all as specified and as directed. |
| 72 | Disconnecting water tank from roof slab/staging upto tripple story building , float valve with float arm and outlet pipe from PVC service water tank, empting, cleaning and removing all scales and dirt etc from tank and finally washing the internal surface with bleaching powder, closing wash outlet, refixing water tank in original position. incl replacement of old tank nipple, & GI union, including writing \\"Cleaned on dt_____ and due date_____ for cleaning, using paint , for tank capacity exc 500 litres and not exc 1000 litres, complete all as specified and as directed. |
| 73 | S&F in repair's 40mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kg/sqcm fixed to wall, ceiling or in floor etc, complete all as specified and as directed. |
| 74 | S&F in repair's aluminium with powder coating,(minium thickness of powder coating 50 micron) frame 92mm x 29.5mm for three track sliding windows, two glazed and one gauzed shutter with one or more rebates including jointing cleat for fixing etc, with sliding type shutters, without sash bars, aluminium sections with powder coated (minium thickness of powder coating 50 micron) 39 x20mm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium with powder coated (minium thickness of powder coating 50 micron) snap beading, scrwes etc. with suitable sliding & locking arrangements, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and 4.8mm thick tinted sheet glass, complete all as specified and as directed. Note:Work to be carried out as per TD : AF/TD/252/15 (R) sheet No 1 to 6 or as per direction of Engineer-in-Charge. |
| 75 | Taking down aluminium door, window and partition (of any type/ size) and refixing the same including necessary repairs such as straighting of edges, bringing at level with required cutting/ adjusting of any depression/ projection to the same opening, complete all as specified and as directed. |
| 76 | S&F in repair's toilet jet spray with 8 mm bore,1.0 Metre long PVC tube with nuts screwed for 15 mm bore GI tubing, suitable for fixing with plastic EWC seat, complete all as specified and as directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
