|
| 1 | Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutter) complete all as specified and directed. |
| 2 | Taking down chowkhats or frame not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | Taking down shutters n, exc 1 Sqm each complete all as specified and directed. |
| 4 | Taking down shutters exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed. |
| 5 | S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed. |
| 6 | S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed. |
| 7 | S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and directed. |
| 8 | S&F 30mm thick, 2nd class soft wood, Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I, Section-8, clause 8.24 (b) complete all as specified and directed. |
| 9 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed. |
| 10 | S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; partly glazed i.e. upper panel will be glass pane fitted externally in the clear space & lower panel will be plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification described in SSR Part II complete all as specified and directed. |
| 11 | S & F for factory made fully glazed PVC window/ventilator shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; complete all as specified and directed. Note:- Glass shall be measured and paid separately. |
| 12 | S & F 300 mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed. |
| 13 | M&L for precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate complete all as specified and directed. |
| 14 | S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed. |
| 15 | S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed. |
| 16 | S & F 200mm long aluminium alloy, anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 17 | S & F aluminium handles, cast type, anodized 150mm long complete all as specified and directed. |
| 18 | S&F for 75mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed. |
| 19 | S&F for 150mm length aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 20 | S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed. |
| 21 | Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads complete all as specified and directed. |
| 22 | M & L sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane, 3mm thick complete all as specified and directed. |
| 23 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane. |
| 24 | S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed complete all as specified and directed. |
| 25 | M&L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, over Powder Coating to (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 26 | M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. over powder coating of any colour (Thickness or powder coating not less than 50 micron complete all as specified and directed. |
| 27 | M & L sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 5.5mm thick complete all as specified and directed. |
| 28 | S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section) complete all as specified and directed |
| 29 | S&F 18/19 mm thick Pre-laminated particle board, exterior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 30 | S&F continuous (piano) hinges mild steel, right finish or electrogalvanized width of flaps 40mm (when open) complete all as specified and directed. |
| 31 | S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 32 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 150mm complete all as specified and directed. |
| 33 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings and S&F galvanized iron medium grade tubing with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, for 15 mm bore GI tubing complete all as specified and directed. |
| 34 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings and S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed. |
| 35 | M&L Lagging to pipes 20mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842. |
| 36 | S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I Including dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 37 | S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I Including dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 38 | S&F in repair 600x450 mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 39 | S&F in repair Vitreous China wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste Pipe and Waste coupling of PTMT (half or full thread ). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB complete all as specified and directed. |
| 40 | S&F in repair for Vitreous China squatting Pan \\"Orrisa Pattern\\" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern complete all as specified and directed. |
| 41 | S&F in repair Vitreous China wash down water closet pan with 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and directed. |
| 42 | S&F in repair PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets (10 Ltr) capacity fixed complete all as specified and directed. |
| 43 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed. |
| 44 | S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed. |
| 45 | S & F Waste coupling of PTMT (half or full thread). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB, sink complete all as specified and directed. |
| 46 | S&F in repairs wall mixer chromium plated 15mm dia complete all as specified and directed. |
| 47 | S&F Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 48 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 49 | S&F Jet for pedestal pan, chromium plated of standard size complete all as specified and directed. |
| 50 | S&F in repair 20 mm dia ball valves, high pressure of epoxy coated aluminium rod and high density plastic ball complete screwed for iron pipes or brass ferrule and fixed complete all as specified and directed. |
| 51 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 52 | S&F in repair Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 53 | S & F 15mm bore bib taps Standard of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), fixed in repair, complete all as specified and directed. |
| 54 | M&L in repair for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type complete all as specified and directed. |
| 55 | S&F in repair chromium plated shower rose 125mm size complete all as specified and directed. |
| 56 | S&F in repair Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked) complete all as specified and directed. |
| 57 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 58 | S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed. |
| 59 | S&F in repair PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement complete all as specified. |
| 60 | S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed complete all as specified and directed. |
| 61 | S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed. |
| 62 | S&F for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 63 | S&F for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 64 | S&F fixed in repairs stainless steel sinks with drainage board made of 1mm thick for kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe of overall size 915mm x 460mm, bowl size 410 x330 x 160mm with glossy finish, waste coupling 32 mm bore of discharge pipe including bedding in cement mortar to dwarf wall fixing cantilever brackets and connecting unions to pipe complete all as specified and directed. |
| 65 | Dismantling and S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old unserviceable steel sheet any type complete all as specified and directed. |
| 66 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old unserviceable steel sheet any type complete all as specified and directed. |
| 67 | M&L for 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in walls including dismantling old unserviceable ply wood complete all as specified and directed. |
| 68 | M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling including dismantling old unserviceable ply wood complete all as specified and directed. |
| 69 | M&L for 10 to 12 mm thick 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 70 | S&F clean swan batten at 30 cm centre exc 5 and not exc 15 cm of 2nd class soft wood complete all as specified and directed. |
| 71 | M&L 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed. |
| 72 | All as per item No 71 above fixing only. |
| 73 | Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed. |
| 74 | S&F plain fillet IInd class hard wood, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified and directed. |
| 75 | M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed. |
| 76 | All as per item No 75 above but except wood. |
| 77 | Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 78 | M&L 75 mm thick cement concrete type B- 2, 1:4:8 (40mm graded aggregate) as in Sub base complete all as specified and directed. |
| 79 | M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 80 | M&L for 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed. |
| 81 | M&L for 80mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-40 Grade complete all as specified and directed. |
| 82 | M&L for chequered cement concrete tiles of size 20cm X 20cm and 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, finished even and fair complete all as specified and directed. |
| 83 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, |
| 84 | S&F Vitrified Ceramic tiles 10 mm thick (square/ rectangular), light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 85 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 86 | M&L for machine cut Kota stone slab flooring 18-20mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 87 | M&L for 25mm thick PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to receive the topping layer complete all as specified and directed. |
| 88 | S&F for glazed ceramic tiles coloured of size 350x250x7mm/450x350x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 89 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 90 | M&L for cement concrete 1:3:6 type C-1 (using 20mm stone aggregate as in plinth protection), 75mm thick complete all as specified and directed. |
| 91 | Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed. |
| 92 | M & L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed. |
| 93 | M&L for brick work with old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed. |
| 94 | M&L brickwork with old size bricks, straight or curved on plan to any radius in half brick thick walls, in cement mortar 1:6 complete all as specified and directed. |
| 95 | Taking down cement plaster and providing rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete/stone, surfaces and finished even and smooth without using extra cement mixed with water proofing compound @ 3% by Wt. of cement (External surfaces) complete all as specified and directed. Note:- WPC shall be measured and paid separately. |
| 96 | Supply only approved integral water proofing compound complete all as specified and directed.. |
| 97 | M&L for rendering 10mm thick on fair faces of brick/stone or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed. |
| 98 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed. |
| 99 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed. |
| 100 | M&L for two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed. |
| 101 | M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including Gl 6mm adjustable suspender of required length of any description including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. Note:- The design and specification of the ceiling board to be approved by GE. |
| 102 | M&L for Pergo tiles wooden mat finishes of size (1200x200x7-8 mm) laid over & including PVC foam 5 mm thick with SR adhesive over & including 50 micron polythene sheet complete all as specified and directed. |
| 103 | S&F in repairs one piece vitreous China wash down water closed pan (pedestal pattern) including integrated flush tank, white or coloured including 'P' or 'S' trap etc complete all as specified and as directed. |
| 104 | S&F 3mm thick aluminium composite in ceiling/ Cladding plain of approved colour / shade to beam/column/slab in circular/rectangular shape including all off sets, bending and clits wherever required to give the required shape and shape and design and silicon filling the joints using water proofing sealant including suspension wire wherever required using and fabricating aluminium tubular hollow section 25mmx25mm frame work of size not exceeding 900mm c/c on existing MS pipe purlin/rafter/column to hold ACP cladding etc complete all as specified and directed. |
| 105 | M&L for hollow PVC panelling 5.00 to 6.0 mm thick for wall/ceiling (as per sample kept in the office of AGE) complete all as specified and as directed |
| 106 | M&L for WPC panelling for wall/ceiling, total thickness 20 to 25 mm and base thickness 5 mm (as per sample kept in the office of AGE) complete all as specified and as directed. |
| 107 | S&F factory made uPVC white colour Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminium track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) Area not exceeding 2.00 sqm each. |
| 108 | S&F factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 109 | S&F 12 mm toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 110 | S&F 3mm Sheet glass, ordinary quality and glazing with oil putty frosted, on one side in square exc 0.5 sq. m in each panel complete all as specified and directed. |
| 111 | S & F in repair Stainless steel curtain rod 25mm dia fixed with decorative brackets, stop roller and glass at the end etc complete all as specified and directed. |
| 112 | S&F in repair 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and directed. |
| 113 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 114 | Dismantling boarding, any description fixed in any position with nails complete all as specified and directed. |
| 115 | Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed. |
| 116 | M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed. |
| 117 | M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete with shade of granite over 15 mm thick rendering on concrete surfaces in CM (1:4) complete all as specified and directed. |
| 118 | Taking down cement plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc and applying rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed. |
| 119 | M&L for preparation of old decorated plastered surfaces of wall including cornices, pilastered etc, by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescent salts and trading oil and greasy sports and applying one coat of whitewash on wall surface including washing of floor, cleaning of glass, joinery, electrical fittings etc of drops & splash complete all as specified and directed. |
| 120 | M&L for preparation of old decorated plastered surfaces of wall including cornices, pilastered etc, by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescent salts and trading oil and greasy sports and applying one coat of whitewash on ceiling surface including washing of floor, cleaning of glass, joinery, electrical fittings etc of drops & splash complete all as specified and directed. |
| 121 | M&L for Preparation of old decorated plastered or unplastered surfaces including cleaning by brooming down or with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and cleaning oil and greasy spots and applying one coat of cement base paint on external surfaces of walls complete all specified and directed. |
| 122 | M&L for preparation of old decorated plastered surfaces of wall including cornices, pilastered etc, by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescent salts and trading oil and greasy sports and applying one coat of oil bound distemper (approved colour/shade) on wall surface including washing of floor, cleaning of glass, joinery, electrical fittings etc of drops & splash complete all as specified and directed. |
| 123 | Complete removal of existing treatment of wall sufaces and applying two coat of oil bound distemper over 2mm thick wall putty to achieve smooth surface complete all as specified and directed. |
| 124 | M&L for preparation of old plastered or un plastered , previously undecorated wall surface by complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 125 | M&L for preparation of old wood or wooden based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 126 | M&L for preparation of old treated wood or wooden based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of Varnishing complete all as specified and directed. |
| 127 | M&L for preparation of old steel/galvanised surfaces over 10cm width or girth and applying one coat of synthetic enamel complete all as specified and directed. |
| 128 | M&L for applying Melamine polish Ist quality the same matching colour & with two coat of Melamine polish glossy/Mat finish as per required on wooden wall panelling and celling following as under steps. Step -I: Sanding the wooden surface along the grain using the sand paper no 80/120/180 paper. Step-II: surface dent repair with dent Filler with a putty knife over the dented area. Step-III: Apply melamine sealer using Spray Machine. Step-IV: Mix Melamine (matt or glossy) base with the catalyst in the specified ratio as per manufacturer instruction add melamine thinner as per instruction then spray using spray gun pressure of 45-55 psi apply two coat of certain interim as per manufacturers instruction. Please Enable Macros to View BoQ information |
