|
| 1 | Repairing of unserviceable light point, fan point, socket point 5A/16A, switches sockets, fan regulator, light fixtures any type of lamp, MCB DBs & all electrical acessories and day to day /door to door maintenance, making the points/accessories serviceable in all respect with replacement of any minor parts like small length of wires (upto 2.5 mtr) adhesive cable and other connected minor acessories. work shall also include to check & removal of leakge in service connection/submains of houses as and when directed. The scope also include cutting of existing bakelite sheet to accommodate new wiring acessories like switches,sockets,fan regulator etc. Note : (i) Any other replacement of major items shall be measured & paid under respective items as supply only. Fixing charge of electrical accessories like, Switch, Sockets etc is deemed to be included in the item rate of attending complaint. (ii) Contractor representative/engineer will report to JE E/M/ Engr-in-charge daily at morning to collect routine/urgent works related to internal electric supply till completion of contract. The work shall be attended by the contractor representative immediately. The contractor will ensure availability of manpower equipped with all sort of petty items such as insulation tape, galvanised screwes, nuts, bolts, washers etc required to accomplish the job. The contractor will also ensure as availability of every type of requisite T&P items to his tradesman. All routine/ urgent job received on job slip will be repaired & got signatue of user's and will be deposited to JE E/M with in 24hrs. In case of any delay in attending the complaint more than 12hrs after handing over of routine/urgent works, the contractor shall be liable to pay the penalty. (iii) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 12 hours. |
| 2 | Taking down carefully aluminum, light, fan, socket or power point complete including unserviceable fittings such as switches ceiling roses, pendants, regulators, sockets etc at site and making good the disturbed surfaces of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc. |
| 3 | M&L for point wiring for one light/fan, bell/ buzzer point controlled by one switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core stranded (multistrand) copper conductor FRLS cable and drawing in and including non metallic rigid PVC concealed conduit medium grade inclusive of conduit fittings such as Bends Teess reducers etc and galvanized iron sheet steel terminal boxes/modular flush boxes of size 16 gauge thickness, light switches sockets with 3mm thick bakelite laminated sheet brass screws and cup washers including one continuous run of 1.50 Sqmm nominal area PVC insulated unsheathed 1100 Volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete. |
| 4 | All as per Item Ser no 3 above but for One light / Fan point controlled by one way switch complete all as specified and directed. |
| 5 | All as per Item Ser no 3 above but for One Bell /Buzzer point controlled by one way switch complete all as specified and directed. |
| 6 | All as per Item Ser no 3 above but for One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed. |
| 7 | All as per Item Ser no 3 above but for One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed. |
| 8 | All as per Item Ser no 3 above but for one light point controlled by two way switches complete all as specified and directed. |
| 9 | All as per item Ser No.3 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed. |
| 10 | S&F in replacement switch modular flush button single pole one way 16 Amp premium qualitty complete. |
| 11 | S&F socket in replacement out let 3 pin 6/16 Amp premium qualitty multipurpose, modular flush type 240 volt complete. |
| 12 | S&F socket out let 3 pin 5 amp multipurpose premium qualitty modular flush type. |
| 13 | S&F switch 6 Amp premium qualitty modular flush type 240 volt one way complete. |
| 14 | S&F in replacement for lamp holder insulated body of PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 15 | S&F in replacement ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed. |
| 16 | Supply bell ding-dong musical AC 230 Volts single pole complete all as specified and directed. |
| 17 | Supply only Stepped type electronics fan regulator socket type flush type on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 18 | Supply and replace the Industrial laminated hylam sheet of 3 mm thick ISI marked (a) 250 mmx 200 mm |
| 19 | (b) 350 mm x 250 mm |
| 20 | (c) 175 mm x 100 mm |
| 21 | (d) 100 mmx 100 mm |
| 22 | Supply and replace iron rectangular block for mounting, switches, sockets, fan regulator etc. with 1.6 mm thick (a) 100 mm x 100 mm and 50 mm deep |
| 23 | (b) 175 mm x 100 mm and 50 mm deep |
| 24 | (c) 250 mm x 200 mm and 50 mm deep |
| 25 | (d) 350 mm x 250 mm and 50 mm deep |
| 26 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp/ offwhite/warm white suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete |
| 27 | Supply and fixing round shape 12 watt watt 220 volts ACrecessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling includingconnecting up with three core flexible copperconductor cable of suitable size complete. |
| 28 | S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holderconnecting up with three core flexible copperconductor cable of suitable size complete all as specified and directed. |
| 29 | Supply and fix acrylic glossy finish premium quality Modular White cover plates with frame 8 Module complete all as specified and directed. |
| 30 | Supply and fix acrylic glossy finish premium quality Modular White cover plates with frame 6 Module complete all as specified and directed. |
| 31 | Supply and fix acrylic glossy finish premium quality Modular White cover plates with frame 4 Module complete all as specified and directed. |
| 32 | Supply and fix acrylic glossy finish premium quality Modular White cover plates with frame 3 Module complete all as specified and directed. |
| 33 | Supply and fix acrylic glossy finish premium quality Modular White cover plates with frame 2 Module complete all as specified and directed. |
| 34 | Supply and fix recess mounting LED driver luminar suitable for 36 to 100 watts complete all as specified and as directed. |
| 35 | Supply and fixing LED lights fitting 1x 20W, 220V,AC 4 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete all as specified by Engr-In-Charge. |
| 36 | Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete. |
| 37 | Suppply and fixing submain wiring with using two single core 6.0 SQmm copper multy stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI MArked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PV C conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting cheses in existing wall of any descirption buiolt in ccement mortor and making good the disturbed surfaces in cement mortor (1:4) and finishing the surfaces to match with existing surfaces and finish termonatioin with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as sepcified and directed .(Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suuitable size shall be measured as one unit). |
| 38 | All as per item Ser No 25 here in before but with using copper conductor of 2.5 Sqmm and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed. |
| 39 | All as per item Ser No.25 here in before but with using copper conductor of 4 Sqmm and using 4 Sqmm copper conductor as earth continuty cable compete all as specified and directed. |
| 40 | S&F PVC rectangular gang box multi purpose 5/15 Amps including making connections complete all as specified. |
| 41 | Supply and replace Rigid PVC casing & capping 20/25 mm wide complete all as specified and directed. |
| 42 | S&F PVC rectangular gang box multi purpose 5 Amps including making connections complete all as specified. |
| 43 | S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed. |
| 44 | S&F for MCB SP&N 40 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed. |
| 45 | S&F for MCCB 4 pole100 Amps breaking capacity 10 KA 'B' series 415 volts 50 Hz complete all as specified and directed. |
| 46 | S&F MCB distribution board double door sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 4 Ways complete all as specified and directed. |
| 47 | S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways complete all as specified and directed. |
| 48 | S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 12 Ways complete all as specified and directed. |
| 49 | S&F vertical type three phase distribution board including MCCB 4 pole 100 Amps as incomer with three phase and single phase TP/SP as outgoing complete with insulated bus bar arrangement IP 43 protection with metal double door 4 way complete all as specified and as directed by Engr-In-Charge |
| 50 | Taking down the Geyser of capacity 25 / 50 Ltr including disconnecting of electric / water supply connections from building for repair / replacement of defective components and overhauling / checking, servicing , overhauling of inner tank , geyser element, checking of geyser assembly and setting of thermostat range complete and refixing the same after repair and testing including making electectric and water supply connection complete all as specified and directed by Engineer-in-charge. Note:- a) All safety precautions for the safety precautions for persons working during removal/fixing back of the Geyser shall be ensured by the contractor . Rates are inclusive of brazing of inner tank of copper for prevention of leakage and replacement of clamps nut bolts gasket set complete . b) Replacement of defective components, painting,etc., which shall be measured and paid for separately.(c)contractor provide of well trained electrician for gyser complaints. |
| 51 | Supply and fixing replacement of old burnt geyser 25 Ltr complete with five star rating(ISI Marked) PVC connection and complete fittings with five star all as specified and directed by Engr-in-charge |
| 52 | Supply only Heating element of capacity 2 kW (cup type / triangular / threaded type), ISI marked, suitable for geyser of capacity 25/50 Ltr complete all as specified and directed by Engineer-in-charge. |
| 53 | Supply only Heating existing type of element of capacity 1.50 KW (cup type), ISI marked, suitable for geyser of capacity 25/50 Ltr complete all as specified and directed by Engineer-in-charge. |
| 54 | Supply only of neon Indicator lamp of red and green colour lamps suitable for geyser of capacity 25/ 50 Ltr of any type / make complete all as specified and directed by Engineer – in – charge |
| 55 | Supply only of Thermostat assembly 16 A,240 AC, ISI marked, suitable for geyser of capacity 25/ 50Ltr of any type / make complete all as specified and directed by Engineer- in- charge . |
| 56 | Supply and Fixing in Replacement of heavy duty (Hot / Cold)ss water connection pipe of size 450 mm x 15mm dia with two no of brass nut on each side for geyser complete all as specified and directed by Engineer – in – charge . |
| 57 | Supply and Fixing in Replacment of bottom plate of geyser in two pices including painting of approved colour suitable for 25/50 ltr capacity geyser as per original pattern and as approved by Engineer in charge complet all as specified and directed by Engineer – in – charge |
| 58 | Supply and Fixing in Replacment of (4 nos) ,16 mm dia nuts bolts of suitable length duly grouted in walls in cement mortar for fixing of geyser of any capacity complet all as specified and directed by Engineer – in – charge . |
| 59 | M & L for disconnecting the assembly from geyser and cleaning, repairing of defective parts and fixing the same complete all as specified and directed. |
| 60 | Supply only of the geyser assembly 25 Ltr complete all as specified and directed. |
| 61 | Supply only Life savior plug 16 A (Plug top) , of power complete all as specified and directed |
| 62 | Taking out damage glass wool from the geyser and supply fix glass wool all around the inner tank of geyser for maintaining the required temperature complet all as specified and directed by Engineer – in – charge |
| 63 | M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt). |
| 64 | Taking down ceiling fans 48”/56” sweep, cleaning of dust properly cleaning, greasing& overhualing of bearings including refixing and connecting up all as directed . |
| 65 | S&F in replacement of old burnt fan1200 MM sweep with super enameled whitr colour copper binding of motor suitable size 1200mm sweep BLDC five star ceiling fan of any make, type, complete all as specified and as directed |
| 66 | Supply only 2.50 Mfd capacitior complete all as specified and as directed. |
| 67 | Supply only 3.15 Mfd capacitior complete all as specified and as directed. |
| 68 | Supply only 4.00 Mfd capacitior complete all as specified and as directed. |
| 69 | Supply only ‘U’ clamps complete with nut, bolts & split pins Heavy duty suitable for existing ceiling fan complete all as specified and as directed. |
| 70 | Supply only M.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete all as specified and as directed. |
| 71 | Material and labour for rewinding of burnt fan motor with super enameled copper wire of suitable size 1200/1400mm sweep ceiling fan of any make, type, model ball bearing including transporation (inclusive of material & labour) complete all as specified and as directed |
| 72 | M & L Painting and hanging of ceiling fans1200 mm /1400mm & Exhaust fans 250/300/450mm complete, in situwith synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. |
| 73 | Taking down exhaust fans 300/450 mm Sweep and cleaning the dust properly, oiling, greasing & overhualing and replacement of defective ,born out parts of bolts and bearings including refixing and connecting up all as directed Note : Replacement of defective/worn out parts will be measured & paid for separately |
| 74 | Supply only Ball bearings suitable for existing exhaust fans as per site. |
| 75 | Supply only copper alloy Bush suitable for existing exhaust fans as per site. |
| 76 | Material and Labour for rewinding of exhaust fans 250/300 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed. |
| 77 | Material and Labour for rewinding of exhaust fans 400/450 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed. |
| 78 | Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed. |
| 79 | Supply and fix in replacement of Exhaust fan Steel body ac single phase 230 volt of size 300mm sweep with blades and frame and louvers. Complete all as specified and directed |
| 80 | Supply only 5 Amp switch piano complete all as specified and directed. |
| 81 | Supply only 5 Amp socket complete all as specified and directed. |
| 82 | Supply only 15 Amp switch piano complete all as specified and directed. |
| 83 | Supply only 15 Amp socket complete all as specified and directed. |
| 84 | Supply only fan regulator socket type complete all as specified and directed. |
| 85 | Supply only 6 Amp modular switch complete all as specified and directed. |
| 86 | Supply only 6 Amp modular socket complete all as specified and directed. |
| 87 | Supply only modular fan regulator complete all as specified and directed. |
| 88 | Supply only plug top 06/16 Amps ,3 Pin,230 Volts complete all as specified and directed. |
| 89 | Supply only PVC copper wire of 2.5 sq mm complete all as specified and directed. |
| 90 | Supply only PVC copper wire of 1.5 sq mm complete all as specified and directed. |
| 91 | Supply and fixing LED lights fitting 1x 20W, 220V,AC 4 feet led T-08 tubelight rod cool day light complete all as specified by Engr-In-Charge. |
| 92 | Supply and fixing in replacement of solar water heating element as per existing complete as specified and directed. |
| 93 | Supply and fixing in replacement of Thermostat for solar water heater system complete all as specified and directed. |
| 94 | Supply and fixing in replacement of solar waterproof floating LED Pool light, 3 W 1.2 V 4 color changing lights all as specified and directed. |
| 95 | M & L for painting of existing panel with the same existing colour and repair and cleaning ,washing of watering of the doors of the existing panel complete all as specified and directed. |
| 96 | Repairing and servicing of complete accessories of solar water Heater also check leakage of the pipe, tanks, panels, and check loose wire connections and replace wires complete all as specified and as directed |
| 97 | S&Fix in replacement of solar heater ss tank covered insulated storage tank capacity 200 ltr of the existing type complete all as specified and directed by Engr-in-charge. |
| 98 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and as directed. Please Enable Macros to View BoQ information |
