|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair/Maint OF Pipe Lines and valves at 5171 ASC, 738 Wrks, NCVD, Anant Ram Vihar, and maint of distribution header, Sluice Valve, non return valve, Air Release Valve and allied works at various locations under GE (Utilities) Udhampur Contract No: GE/U-69/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of soft/dense soil. complete all as specified and directed by Engr-in-Charge. |
| 3 | Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr-in-Charge. |
| 4 | Removing surplus soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 5 | Taking up or down CI/DI/MS water mains pipe 300 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket with rubber gasket complete all as specified and directed by Engr-in-Charge. |
| 6 | Refixing MS/DI/CI pipe obtained from item No. 04 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 300 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engr-in-Charge. |
| 8 | Taking up or down CI/DI/MS water mains pipe 200 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. |
| 9 | Refixing MS/DI/CI pipe obtained from item No. 16 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 200 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engr-in-Charge. |
| 10 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. . |
| 12 | Refixing GI/CI pipe obtained from Item No.19 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections complete all as specified and directed by Engr-in-Charge. |
| 13 | Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 14 | Taking up or down GI pipe of size bore of pipe 100mm diaincluding all fittings complete all as specified and directed by Engr-in-Charge. |
| 15 | Description all as per Ser Item No 13.00 here-in-before, but of size 80mm dia |
| 16 | Description all as per Ser Item No 13.00 here-in-before, but of size 50mm dia |
| 17 | Description all as per Ser Item No 13.00 here-in-before, but of size 40mm dia |
| 18 | Description all as per Ser Item No 13.00 here-in-before, but of size 25mm dia |
| 19 | Description all as per Ser Item No 13.00 here-in-before, but of size 20mm dia |
| 20 | Refixing GI/CI pipe obtained from Item No. 13 above and connections in new or old position (walls, trenches, ceiling and floors etc.) of fbore 100mm dia. Complete including main/branch connections complete all as specified and directed by Engr-in-Charge. |
| 21 | bore of pipe 80mm dia |
| 22 | bore of pipe 50mm dia |
| 23 | Supply & fixing only GI pipes in repair of bore of pipe 100mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 24 | Description all as per Ser Item No 20.00 here-in-before, but of dia 80 mm dia |
| 25 | Description all as per Ser Item No 20.00 here-in-before, but of dia 50 mm dia |
| 26 | Description all as per Ser Item No 20.00 here-in-before, but of dia 40 mm dia |
| 27 | Description all as per Ser Item No 20.00 here-in-before, but of dia 25 mm dia |
| 28 | Description all as per Ser Item No 20.00 here-in-before, but of dia 20 mm dia |
| 29 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pillar complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply fabrication and fixing MS joints like Flanged, bends, Tapers, tail piece (any type) caps, plugs for 100 mm to 300 mm bore pipe complete all as specified and directed by Engr-in-Charge. |
| 31 | Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 32 | Stem bush bronze |
| 33 | Gland flange cast iron |
| 34 | Stud/Bolt carbon steel |
| 35 | Stem nut/chaknut |
| 36 | Stem Stain less steel |
| 37 | Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. |
| 38 | Decoupling, disconnecting sluice valve of size 200 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 39 | Stem bush bronze |
| 40 | Gland flange cast iron |
| 41 | Stud/Bolt carbon steel |
| 42 | Stem nut/chaknut |
| 43 | Stem Stain less steel |
| 44 | Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 45 | Stem bush bronze |
| 46 | Gland flange cast iron |
| 47 | Stud/Bolt carbon steel |
| 48 | Stem nut/chaknut |
| 49 | Stem Stain less steel |
| 50 | Decoupling, disconnecting sluice valve of size 100 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 51 | Stem bush bronze |
| 52 | Gland flange cast iron |
| 53 | Stud/Bolt carbon steel |
| 54 | Stem nut/chaknut |
| 55 | Stem Stain less steel |
| 56 | Supply and fix in replacement cast iron sluice valve of 300 mm dia (PN 1.6) ISI Marked with iron wheel head both end flanged, steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers etc, including taking down the old existing complete all as specified and directed by Engr-in-Charge. |
| 57 | Description all as per Ser Item No 33.00 here-in-before, but of size 250mm dia. |
| 58 | Description all as per Ser Item No 33.00 here-in-before, but of size 200mm dia. |
| 59 | Description all as per Ser Item No 33.00 here-in-before, but of size 150mm dia |
| 60 | Description all as per Ser Item No 33.00 here-in-before, but of size 100mm dia |
| 61 | Description all as per Ser Item No 33.00 here-in-before, but of size 80mm dia |
| 62 | Description all as per Ser Item No 33.00 here-in-before, but of size 50mm dia |
| 63 | Supply and fix in replacement of cast iron air release valve with two air outlets of size 100 mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washers with arrangement for fixing, including taking down complete.Item Code No/ Size CI 026/N Make: Leader or equivelant in Kirloskar/BVI/BIR complete all as specified and directed by Engr-in-Charge. |
| 64 | Description all as per Ser Item No 40.00 here-in-before, but of size 80 mm dia and Item code No/ Size CI 026/L |
| 65 | Material and labour for spraying herbicide (Round up) on area to remove unwanted vegitation/grass at various locations complete all as specified and directed by Engr-in-Charge. |
| 66 | Material and labour for shifting heavy items /using excavator / cleaning areas / cleaning site by providing crane/hydra/excavators/tractors/trolley ect as required at site ccomplete all as specified and directed by Engr-in-Charge. |
| 67 | Supply and fixing leather gasket including replacement old UNSV gasket for 300/250 mm complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply and fixing leather gasket including replacement old UNSV gasket for 200/150 mm complete all as specified and directed by Engr-in-Charge. . |
| 69 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm bore passing through NHAI, BRO , by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge.Note:- (i) Contractor fully responsible for for jointing work required T&P equipment, and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra fittings/pipe will be measured and paid separatel (iii) Necessary permission from civil authorities may be obtained where road cutting involves. |
| 70 | Material and labour for repair to leaking flanged/circular welding joints of 250 to 300 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. |
| 71 | Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. |
| 72 | Supply and fix Gland packing type 3 of size 8 mm made of asbustus grip with silicon complete all as specified and directed by Engr-in-Charge. |
| 73 | Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temp 30 to 120 degree celsious drop point 174 degree celsious, colourlight fawn complete all as specified and directed by Engr-in-charge. Make: Servo ( IOC)/Bhart petrolium/Castrol or equivalent make approved by E-in-C's Branch. |
| 74 | Supply only lead wool /spunyarn for jointing the CI pipes complete all as specified and directed by Engr-in-Charge. |
| 75 | Supply only leadl for jointing socket and spigot CI pipes complete all as specified and directed by Engr-in-Charge. |
| 76 | Demolition of existing valve pit chamber , M&L for masonry valve pit of size 900x900x900mm internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed by Engr-in-Charge. |
| 77 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, complete all as specified and directed by Engr-in-Charge. |
| 78 | Supply and fix in replacement of gun-metal, globe or gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified & directed by Engr-in-Charge. |
| 79 | Description all as per ser item No 55.00 here-in-before, but of dia 40 mm gate valve. |
| 80 | Description all as per ser item No 55.00 here-in-before, but of dia 25 mm gate valve. |
| 81 | Description all as per ser item No 55.00 here-in-before, but of dia 20 mm gate valve. |
| 82 | Description all as per ser item No 55.00 here-in-before, but of dia 15 mm gate valve. |
| 83 | Material and labour for taking down by scraping and preparation the surface of the header approx 6 mtr long with sluice valve and NRVs at pump houses, OHT including repainting one coat of super quality of black enamel paint with one under coat of primer , etc complete all as specified & directed by Engr-in-Charge. |
| 84 | Material and labour for fabrication of MS sheets ,angle iron in replacement of old pit cover with necessary welding work and one coat of red oxide primer to the welded works and painted with black enamel paint complete all as specified & directed by Engr-in-Charge. |
| 85 | M & L for loose filling in pump houses, under header, under road cuttings etc of hard core broken to gauge not exc 63 mm broken stone/boulders incl leveling and spreading llime stone powder under stones complete all as specified & directed by Engr-in-Charge. |
| 86 | Supply,installation,commisioning and testing of centrifugal pump of cap 40 HP with CI Impellor, casing CI , SS shaft capable to deliver fresh water having 1500 LPM at effective head of 70 mtr coupled with squirrel cage induction motor 30KW 3 phase 415 volts TEFC type minimium 80% efficency coupled to driver rating 30 HP ,squirrel cage induction motor 1475 RPM 3 Ph 415 volts 50 Hz as as per manufacturer design with all standard fixing coupled through flexible coupling to be connected with suction and delivery side + coupling and base plate including taking out UNSV pump of same capacity complete all as specified and directed by Engr-in-Charge. Pump Model : DB 65/26xe/ Casing CI IS210:FG260(012), Impeller BR IS 318GR-LTB2(110),Shaft SS 410 ANLD(253), Motor: KBL IE@SAF,30 KW,2P,415V,50 HX Note :(i) UNSV Pump & motor should be the property of the department Loading/unloading & transportation charges from site to MES store yard shall be deemed included in the quoted rates. (ii) Any fabrication work reqd for fixing the pump shall be deemed included in the quoted rates. |
| 87 | M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 16 sqmm inculding taking down existing old unserviceable cable of complete all as specified & directed by Engr-in-Charge. |
| 88 | M&L for Monoblock pumpset 1HP self priming suitable for working at single phase 230Volts,suction/delivery 25 X 25 ,head range 40 mtr ,50 LPM with 1HP DOL starter complete all as specified & directed by Engr-in-Charge. |
| 89 | Supply and fixing in replacement of butterfly valve of size 80 mm (PN 1.6) (ISI Marked) gtype complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv complete all as specified & directed by Engr-in-Charge. |
| 90 | M&L for cutting of existing GI/CI water main pipeline up to 150 mm bore in position for making branch connection/ insertion of GI tee, including excavation and earthwork, complete all as specified & directed by Engr-in-Charge.Note: GI fittings such as tee, elbows, collars, reducers, etc., and jointing material for fixing of cast iron fittings shall be measured and paid for separately. |
| 91 | M&L for repair to leaking GI pipeline of 80 mm bore, by providing and fixing necessary fittings such as sockets, tees, elbows, etc., including necessary excavation in any type of soil, bailing out of water, returning, filling-in and ramming of excavated soil in trenches, and making good all disturbed surfaces such as roads, floors and walls to match the existing finish, at any depth, complete all as specified and as directed by the Engineer-in-Charge.Notes:(a) The contractor shall be fully responsible for arranging all necessary excavation for jointing work, required tools and plant, mechanical excavation (if required), manpower at site, and for making good all disturbed surfaces of roads, walls, floors, etc., to match the existing surface. The cost of the same shall be deemed to be included in the quoted rate.(b) Any additional length of GI pipe required shall be measured and paid for separately. |
| 92 | Description all as per ser item No 68.00 here-in-before, but of size 40 mm to 50 mm bore pipe. |
| 93 | Description all as per ser item No 68.00 here-in-before, but of size 15 mm to 25 mm bore pipe. |
| 94 | Material and labour for decoupling and disconnecting suction and discharge pipelines, dismantling and taking down the pump set from foundation, dismounting from base channels, stripping and opening of all pump components, derusting, cleaning, and complete overhauling, including repair or replacement of unserviceable parts of the pump set, and transportation to workshop for repairs wherever required. Reassembling of the pump set, mounting and fixing on base channels, recoupling of suction and discharge lines, alignment, commissioning and testing, complete, in respect of centrifugal / multistage pump of capacity 25/30 HP, all as specified and as directed by the Engineer-in-Charge. |
| 95 | Note: The quoted rate shall be deemed to include the following:(i) Provision of hydra crane, if required, complete with operator, helper(s) and requisite number of mates for decoupling, disconnecting, loading, unloading, positioning, fixing on base channels, recoupling of suction and discharge lines and alignment of pump set.(ii) Vehicle for transportation of pump set to and from workshop, wherever required.(iii) Manpower comprising Skilled Pump Mechanic for dismantling, overhauling, reassembly and alignment works.(iv) Tools & Plants including slings, lifting tackles, holding/catching devices, clamps, load supports and all other accessories required for safe handling of the pump set.(v) Skilled Electrician for disconnection and reconnection of electrical connections of pump motor and associated control panel, including testing after reinstallation.(vi) Supply and fixing of replacement parts, shall be measured and paid for separately under the relevant items of Schedule ‘A’. |
| 96 | Supply and fixing of new spare parts for single stage / double stage / multistage centrifugal pump sets of capacity up to 20/25 /30HP, as per manufacturer’s standard composition and specifications of the existing make and model of pump, including replacement of worn-out, damaged or unserviceable components, complete, all as specified and as directed by the Engineer-in-Charge. |
| 97 | Impeller, MOC: CI |
| 98 | Shaft, MOC: CS |
| 99 | Shaft sleeves |
| 100 | Casing bearing, MOC: CI |
| 101 | Bearing housing/Bearing cover, MOC: CI |
| 102 | Gland cup with nut and bolts, MOC: CI |
| 103 | Jaw/Spider/Star/Tyre Coupler, MOC: CI |
| 104 | Inter stage ring/Shaft sleeve nut, MOC: BR |
| 105 | O Ring, MOC: Neopren rubber |
| 106 | Packings/Mechanical seal |
| 107 | Lath/Mchining works of any type at workshop required for balancing of impller/for fixing of new parts to existing shfts required for proper setting and smooth functioning to achieve desired discharge of the pump for 100 /75HP pump complete all as specified and directed by Engr-in-charge. |
| 108 | M&L for PCC pillars, including dismantling of existing pillars, of size 0.9 m × 0.6 m × 1.8 m (comprising 0.6 m below ground level and 1.2 m above ground level) for mounting and leveling of the header at a height of 1.5 m above ground level, complete as specified and as directed by the Engineer-in-Charge.Note: The quoted rate shall be deemed to include the following:(a) Excavation in trenches not exceeding 1.5 m width and 1.5 m depth, including removal of hard/dense soil, complete as specified and directed.(b) Returning and filling of excavated material, including spreading, levelling, watering, and well ramming in layers not exceeding 25 cm, complete as specified.(c) Transportation of excavated material up to 50 m and depositing at locations directed by the Engineer, at a level not exceeding 1.5 m above the starting point, complete as directed.(d) M&L of PCC 1:3:6 (C-2) using 40 mm graded crushed stone aggregate for foundation filling of pillars, complete as specified and directed. |
| 109 | (e) M&L of RCC foundations, M-25 (using 20 mm graded aggregates), including rafts, footings, foundation beams, plinth beams, column bases, basement slabs, under-reamed piles, and mass concrete, complete as specified and directed by the Engineer-in-Charge.(f) M&L of RCC columns, M-25 (using 20 mm graded aggregates), complete as specified and directed.(g) Supply, cutting, bending, cranking, and placement of mild steel bars of 10 mm dia and above, including spiral hooping for columns, hooking of ends, binding with annealed mild steel wire not less than 0.9 mm dia, or securing with clips, complete as specified and directed.(h) Cost of labour for mounting the header on PCC pillars. (i) Prior to mounting, the strength of each pillar shall be tested. If a pillar fails to meet the required strength, it shall be dismantled and reconstructed by the contractor at his own risk and cost, to the complete satisfaction of the Engineer-in-Charge. |
| 110 | Providing and carrying out welding of any type (electric arc / gas welding) for fabrication, erection or repair of steel/MS/GI members, brackets, frames, supports, angles, flats, pipes etc. of any size and thickness, including surface preparation, alignment, welding consumables, finishing and all incidental works, complete, measured per stick/ filler rod / welding rod, complete all as specified and directed by Engr-in-charge. |
| 111 | Supply and laying DWC (Double wall corruguated) pipe 40/32 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing complete all as specified and directed by Engr-in-charge |
| 112 | Supply and fixing MS ERW pipe of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (2x 150 mm ),(1x200 mm) from delivry side and 04 outlets from distribution side ( 02 x 150mm, 01 x 100mm, 02 x80 mm, dia MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engr-in-charge) |
| 113 | Dismantling and taking down old unsv LT Panel and Supplying, installing, testing & commissioning indoor type cubical panel board outer shell made out of 3.15 mm thick CRCA sheet and inner shell made out of 2 mm thick and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform with nut and bolts, frame factory fabricated with front and back openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able with arrangement of pad locking on both doors incl 2 no. of pad locks of three keys shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, incl Aluminium bus bar of 200 A , tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following, complete all as specified and directed by Engr-in-charge :-(Make : Hanson, Universal, DV Electromatics) |
| 114 | a) 4 Nos bus bar of equal size made out of Aluminium strip of suitable size with PVC insulated coloured heat shrinkabal type sleeves, of rating 200Amps, mounted on non cracking resin type insulators - 01 Jobb) MCCB TPN 160 Amps, 415 Volts, 36KA,4 pole , Ics=100% Icu, overload adjustable short circuit adjustable type incl complete connection 01 Nos (Incoming)c) MCCB TP 63 Amps, 415 Volts, 36KA,4 pole , Ics=100% Icu, overload adjustable short circuit adjustable type incl complete connection 03 Nosd) In built star delta suitable for 30 HP motor. 03 Nos with relays.e) Under voltage, over voltage ,over load relay,phase sequence corrector - 01 Job |
| 115 | f) Interconnection of MCCBs to Busbar with AL strip of suitable size with PVC insulated colour coaded heat shrinkable type sleeves - 1 Jobg)RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nosh)Digital Ammeter of range 0-100 A, auxiliary voltage 230 volts with selector switch -02 Nosi) Volt meter of range 0-500 Volts, auxiliary voltage 230 volts with selector switch -1 Noj)Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, cable glands etc complete Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
