|
| 1 | Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering. |
| 2 | S&F prepainted galvalume aluminium zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws as specified |
| 4 | Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete. |
| 5 | S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A. |
| 6 | Dismantling of wall and ceiling board any thickness/description including cover fillet. |
| 7 | S&F for Anodised Aluminium snap grid size 605x604mm frame work for false ceiling all as specified and directed by Engr-in- charge. |
| 8 | M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping. |
| 9 | Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level). |
| 10 | M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete. |
| 11 | M&L providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in copings/kerbs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete. |
| 12 | M&L for PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains. |
| 13 | M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc. |
| 14 | Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses. |
| 15 | M&L for roughening surface of old concrete floor by picking, sweeping cleaning and washing down with to remove dust |
| 16 | M&L for brushing neat cement slurry with 3.0 kg of cement per Sq Mtr |
| 17 | M&L, 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even. |
| 18 | M&L Non - skid Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete. |
| 19 | M&L Non - skid Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete. |
| 20 | Description all as per above item No 19, but as in verticle surface or skirting complete. |
| 21 | M&L, 10mm thick rendering as screed bed or bedding layer of mortar in CM (1:4) for lying tiles on vertical surface finishes. |
| 22 | M&L, glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles. |
| 23 | M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including circular cutting,chamfering of edges as required. |
| 24 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons |
| 25 | M&L 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required. |
| 26 | Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc |
| 27 | M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6 |
| 28 | Demolition of cement concrete (reinforced) any description and in any position. |
| 29 | M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc. |
| 30 | Use & waste frame work to soffits of suspended slab such as floor or roof slab, chajjas and similar work not exc 200 mm thick (Horizontal or slopeing) rough finished complete. |
| 31 | M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site. |
| 34 | M&L for Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete |
| 35 | M&L for Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete. |
| 36 | M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work. |
| 37 | Cutting holes in brickwalls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required not exc. half brick |
| 38 | S&F particle board core factory made solid PVC Moulded door shutter 28 to 30mm thick (stiles) with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back faces,and with particle Board Core supplying and fixing in frame at site as per specification and drawing. |
| 39 | S&F 2nd class hard wood 30 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass, gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a). |
| 40 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg. |
| 41 | S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing. |
| 42 | S & F 100 mm Butt hinges medium weight medium cold rolled mild steel. |
| 43 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete. |
| 44 | S&F of 100 mm size aluminium handles cast type anodised. |
| 45 | S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed. |
| 46 | S&F powder coated aluminium frame of size 65mm x 38mm x 1.00 thick or appropriate section as directed including with frame standard section for sliding type windows /ventilatorss with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including 5.5 mm thick tinted glass n.exc 1 Sqm each panes (window of frame 3 tract wt not less than 0.50kg/RM and shutter having wt not less 0.45kg/RM) all as specified and directed |
| 47 | S&F powder aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 48 | Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary oining cleats, glazing clips, rubber packing, anodised aluminium snap eading, screws etc. complete all as specified |
| 49 | S&F stainless steel wire cloth o.36 mm nominal dia of wire and average with of aperature 1.40 mm and fixed with stainless steel wire staples in repairs. |
| 50 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 51 | S&F in repair 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. |
| 52 | S&F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 53 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 4mm thick AC building board or commercial plywood and aluminium channel beading provided all around and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 54 | S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste coupling and pipe incl cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm. |
| 55 | S&F in repair stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces . |
| 56 | Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site. |
| 57 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 58 | Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site. |
| 59 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 60 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 in brick walls for concealed water tubing, cutting not exc 10cm girth |
| 61 | Dismantling water tanks Capacity in exc 500 & n exc 1000 litres and removing to store |
| 62 | S&F Rotational moulded polyethlene water storage tanks three layers (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I |
| 63 | S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe. |
| 64 | S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe. |
| 65 | S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors |
| 66 | S&F PVC (SWR) pipes 75 mm single socketed in any length with rubberring joints, laid in trenches or in floors |
| 67 | S&F PVC bends any radius 110 mm dia |
| 68 | S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets or erecting stand and making necessary arrangement for fixing. |
| 69 | S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor. |
| 70 | S&F in repair 10 ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket. |
| 71 | S&F 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends. |
| 72 | S&F in repairs15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule. |
| 73 | S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 74 | S&F 32 mm dia waste/flush pipe for urinal and WHB complete. |
| 75 | Supply only 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe. |
| 76 | S&F for Brass chromium plated tubular towel rail 20mm dia D Type, 60 cm long between flanges. |
| 77 | S&F in repair Brass chromium plated shower rose 125mm with or without swivel joints, including fixing to steel pipe or union complete. |
| 78 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)complete. |
| 79 | M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete. |
| 80 | Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc. |
| 81 | M & L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete. |
| 82 | M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even complete.(WPC will be paid saperatelly) |
| 83 | Supply only liquid water proofing compound. |
| 84 | M & L preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete. |
| 85 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness on new plastered wall surfaces. |
| 86 | M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described. |
| 87 | M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer |
| 88 | M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165 |
| 89 | S&F Flat iron / angle iron for wind tie, hold fast to fixed door/window. |
| 90 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for taking credit and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 91 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 92 | Taking down ceiling fan/ exhaust fan and refixing of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades complete all as specified and as directed. |
| 93 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- (Note: Rate of modular cover plates are deemed to be included in the rate quoted) |
| 94 | (a) One light point controlled by one, one way switch 5 Amps |
| 95 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 96 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 97 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 98 | Description all as per item No 93 here in before but using 2.5 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 99 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified |
| 100 | S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 101 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 102 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 103 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 104 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 105 | S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 106 | S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 Amps with extended terminals complete all as specified. |
| 107 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 108 | S & F for MCB Single pole and neutral rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 109 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 110 | S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 9/10 watts complete all as specified and as directed. Make Havells , Philips, Bajaj. |
| 111 | S & F for Lamp holder, PVC body suitable for batten fitting completes all as specified. |
| 112 | S & F for Highly efficient LED Bulbs, 9/10 W complete all as specified and directed |
| 113 | S & F for LED mirror light 9/10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Havells, Philips. |
| 114 | S & F for Energy saving new generation 9/10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :-Havells Bajaj Philips |
| 115 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Philips, Havells. |
| 116 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 4 core |
| 117 | Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 m in depth for laying under ground cables/erection of pole and getting out in soft loose soil, complete all as specified. |
| 118 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified. |
| 119 | Removal of excavated surplus material (Soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified. |
| 120 | M&L for Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trences. |
| 121 | S&F for old size brick well burnt, laid flat, for cable protection complete all specified and directed. |
| 122 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.00 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.00 sqmm cable,one run of 4.00 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 123 | S & F for metal body exhaust fan, AC single phase, 240 V of size 225 mm sweep 1380 rpm with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and M&L for making hole and proper finishing the surface as existing before and taking down of old unserviceable fan complete all as specified and as directed |
| 124 | M& L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised earth wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES Schdule Part-I connected to earthing point and testing on completion with and including 15mm bore light grade GI protection pipe (upto 7.5 meter beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8mm dia TMT bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore medium grade GI watering pipe common salt and charcoal filling, necessary excavation and earth work complete |
| 125 | Taking down old XLPE/PVC/Service cable and from 9 mtr height of pole and removing the materials from site and making good the disturbed surfaces etc complete all as specified and directed. |
| 126 | Supply,laying,jointing,testing and commissioning XLPE insulated, armoured, heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 120 sqmm 4 core connected with aluminium lugs connected by cramping tools all as specified and directed at site.Note:- Excavation and earth work will be measured and paid separately. |
| 127 | Description all as per item Srl items No.122 above here-in-before but of size 16 sqmm x 4 core |
| 128 | M&L XLPE Insulated Single Core Copper Conductor in replacement of size 25 Sqmm 1 cores laid up, PVC tape/PVC Extruded Innersheathed for Multicore Cables, Unarmoured, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988 (Colour : Red, yellow, Blue, Black and Green as per requirement) including suitable size of copper thimbles fixed by cramping tools complete all as specified and directed at site. Make : Havells/ Polycab/ KEI |
| 129 | M&L XLPE Insulated flat type Copper Conductor of size 10 Sqmm 3 cores laid up, PVC tape/PVC Extruded Innersheathed for Multicore Cables, Unarmoured, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988 including suitable size of copper thimbles fixed by cramping tools complete all as specified and directed at site. Make : Havells/ Polycab/ KEI |
| 130 | M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggaregate in kerbs/coping /bed plates and like including weathering slightly rounded or chamfered complete with necessary use and waste fo form work complete all as specified and directed at site. |
| 131 | Providing, laying and fixing DWC HDPE pipe OD/ID 63/50 mm dia (SN-4 stiffness class), including accessories, laid in trench with smooth inner surface, for protection of underground electrical cables, including necessary accessories such as couplers, bends, sockets, etc making good complete, all as specified and directed by Engineer-in-Charge. Make : SFMC/ Prince/ Finolex/ Astral Ltd |
| 132 | Providing, laying and fixing DWC HDPE pipe OD/ID 110/90 mm dia (SN-4 stiffness class), including accessories, laid in trench with smooth inner surface, for protection of underground electrical cables, including necessary accessories such as couplers, bends, sockets, etc making good complete, all as specified and directed by Engineer-in-Charge. Make : SFMC/ Prince/ Finolex/ Astral Ltd |
| 133 | Supply ,fabrication, installation and testing of Soft starter Panel indoor type factory made ,IP 54 water and vermin proof CPRI approved protection of size not less than 1200 mm x 2000 mm x 500 mm (over all dimension) made out of 2.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of 600mm height and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old existing one complete all as specified and as directed. Note : The contractor shall submit the drg with sample of accessories and CPRI certificate for approval of GE before execution of work. INCOMMING :-(a) Copper strip busbar of 300 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 03 Nos, LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01(set of three) Digital Multifunction meter of suitable capcity.(b) 3 Pole MCCB 160 Amps with rotary handle, adjustable thermal magnetic release type, 3 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 Nos(c) On Load Change over switch 3 Pole 160 Amps capacity act as incoming of DG Set and Mains - 01NosOUTGOING :-(a) Soft Starter suitable for 40 HP (≈30 kW), 415V ±10%, 3 Phase, 50 Hz AC induction motor, designed for smooth starting and stopping of motor by controlling starting current and torque, thereby minimizing electrical stress and mechanical shock on connected equipment, thyristor (SCR) controlled, having adjustable parameters for initial voltage, ramp-up time, current limit, and soft stop, complete with inbuilt bypass contactor - 02 Nos (Siemens/ Schneider/L&T)(b) 3 Pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 3 pole, 415 Volts, Ics = 100% Icu, 25 KA -02 NosNote :-Separate opening for Each motor Staterer panels complete with all necessary indication lamps, multi function meter, START/STOP push buttons, NO/NC switches, protection devices, and enclosure suitable for outdoor/indoor use as required. |
| 134 | Supply ,fabrication, installation and testing of Soft starter Panel indoor type factory made ,IP 54 water and vermin proof CPRI approved protection of size not less than 1200 mm x 1000 mm x 500 mm (over all dimension) made out of 2.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of 600mm height and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old existing one complete all as specified and as directed. Note : The contractor shall submit the drg with sample of accessories and CPRI certificate for approval of GE before execution of work. INCOMMING :-(a) Copper strip busbar of 200 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 03 Nos, LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01(set of three) Digital Multifunction meter of suitable capcity.(b) 3 Pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type, 3 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 Nos(c) On Load Change over switch 3 Pole 100 Amps capacity act as incoming of DG Set and Mains - 01NosOUTGOING :-(a) Soft Starter suitable for 40 HP (≈30 kW), 415V ±10%, 3 Phase, 50 Hz AC induction motor, designed for smooth starting and stopping of motor by controlling starting current and torque, thereby minimizing electrical stress and mechanical shock on connected equipment, thyristor (SCR) controlled, having adjustable parameters for initial voltage, ramp-up time, current limit, and soft stop, complete with inbuilt bypass contactor - 01 Nos (Siemens/ Schneider/L&T)(b) 3 Pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 3 pole, 415 Volts, Ics = 100% Icu, 25 KA -01 NosNote :-Separate opening for Each motor Staterer panels complete with all necessary indication lamps, multi function meter, START/STOP push buttons, NO/NC switches, protection devices, and enclosure suitable for outdoor/indoor use as required. |
| 135 | Supply ,fabrication, installation and testing of LT Panel out door type factory made, IP 54 water and vermin proof CPRI approved protection of size 1000 mm x 1000 mm x 600 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of 600 mm height and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories complete all as specified and as directed. Note : The contractor shall submit the drg with sample of accessories and CPRI certificate for approval of GE before execution of work. INCOMMING :-(a) Copper strip busbar of 250 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos, LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01(set of three) Digital Multifunction meter of suitable capcity.(b) 4 Pole MCCB 160 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity including all fixing accessories with both ends spreader links -01 NosOUTGOING :-(a) (c) 4 Pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity including all fixing accessories with both ends spreader links -01 Nos(c) 4 Pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity including all fixing accessories with both ends spreader links -03 Nos Please Enable Macros to View BoQ information |
| 136 | Supply ,fabrication, installation and testing of LT Panel out door type factory made, IP 54 water and vermin proof CPRI approved protection of size 1000 mm x 1000 mm x 600 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of 600 mm height and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories complete all as specified and as directed. Note : The contractor shall submit the drg with sample of accessories and CPRI certificate for approval of GE before execution of work. INCOMMING :-(a) Copper strip busbar of 250 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos, LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01(set of three) Digital Multifunction meter of suitable capcity.(b) 4 Pole MCCB 160 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity including all fixing accessories with both ends spreader links -01 NosOUTGOING :-(a) (c) 4 Pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity including all fixing accessories with both ends spreader links -01 Nos(c) 4 Pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity including all fixing accessories with both ends spreader links -03 Nos Please Enable Macros to View BoQ information |
