|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK: REPAIRS/ MAINTENANCE TO IRON GATES, WICKET GATES, GRILLS AND OTHER MISC B/R WORKS IN MARRIED AND OTM ACCNS AT CHAF BANGALORE CONTRACT AGREEMENT: GE(AF)/B/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge. |
| 3 | Supply and fix for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 4 | Supply and fix for steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed by Engr-in-charge. |
| 5 | Supply and fix for welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and as directed by Engr-in-charge. |
| 6 | Supply and fix for mild steel, plain, blacksheet 1.25mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc., as required complete all as specified and as directed by Engr-in-charge. |
| 7 | Supply and fix for steel rolling shutters, 1.0mm thickness of lath with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; fixed as in repairs complete all as specified and as directed by Engr-in-charge. |
| 8 | Taking down rolling shutter, hood cover and guide channels etc., complete width of rolling shutter upto 3m, incl complete servicing, greasing, oiling and strengthening of guide channels and refixing all arrangements in proper alignments for smooth functioning complete all as specified and as directed by Engr-in-charge. |
| 9 | Supply and fix in repairs mild steel plain sheet 0.63mm thick, cut to size, made to shape of hood cover of rolling shutters, fixed in position including painting two coats with synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 10 | Taking down existing unserviceable tension spring of rolling shutter and provision of new tension spring of approved quality complete all as specified and as directed by Engr-in-charge. |
| 11 | Taking down existing unserviceable locking arrangement of rolling shutter and provision of new locking arrangement with mild steel safety lever locks 4 levers complete all as specified and as directed by Engr-in-charge. |
| 12 | Supply and fix for ball bearing for rolling shutter complete all as specified and as directed by Engr-in-charge. |
| 13 | Supply and fix for collapsible steel gates, top hung, consisting of channels pickets, pivoted flat bars, top and bottom runners, brass handles etc., erected in postion and securing runners with holdfasts and brackets including taking down collapsible steel gate of any description complete all as specified and as directed by Engr-in-charge.Note: The rate quoted shall incl for provision of suitable size of bed blocks in PCC 1:2:4 type B1 for securing of runners hold fasts. |
| 14 | Repairs to existing collapsible steel gates of any type and description incl oiling and greasing complete for smooth functioing complete all as specified and as directed by Engr-in-charge.Note: The rate quoted shall incl for replacing of old fittings/ fixtures such as wheels, handles and locking system with new fittings/ fixtures. |
| 15 | Demolition of brick work/ stone boulder masonry, built in cement mortar incl all quoins, arches pillars etc., but excluding ashlar facings etc., complete all as specified and as directed by Engr-in-charge.Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. demolition item taken in schedule of credit contractor may quoate rate accoridingly. |
| 16 | Material and labour for precast cement concrete block masonry with solid blocks in PCC 1:3:6 Type C1 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 17 | Dismantling CGI/ asbestos cement /polycarbonate (corrugated, semi corrugated, etc.,) sheet in roof coverings complete all as specified and as directed by Engr-in-charge. |
| 18 | Supply and fix for prepainted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 19 | Supply and fix for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 20 | Supply and fix for polycarbonate sheet twin wall special quality of 6mm thick and including 'H' connectors for joints and anti dust tape of approved colour (transparent) fabricated to required shape and curves including fixing to mild steel frame work with screws and washers complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fix in repairs 2mm thick ordinary quality colorless cast acrylic sheet with light transmittance of 92% including fixing with necessary screws, and aluminium beading complete all as specified and as directed by Engr-in-charge. |
| 22 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 23 | Material and labour for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by Engr-in-charge. |
| 24 | Dismantling/ breaking out existing cement block pavers of any description and thickness complete all as specified and as directed by Engr-in-charge. |
| 25 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-charge. |
| 26 | Material and labour for 75mm thick (compacted thickness) WBM with coarse aggregates of grading-2 (63 to 40 mm size) or of grading-3 (50 to 20mm size) with granite trap or basalt stone) spread rolled and consolidated as required including rolling with hand rollers complete all as specified and as directed by Engr-in-charge. |
| 27 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engr-in-charge. |
| 28 | All as per item No.26 here-in-before but except tiles. |
| 29 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in cement mortar complete all as specified and as directed by Engr-in-charge. |
| 30 | Material and labour for 300x300mm of size and 20-22mm thick rubber moulded coloured chequered cement concrete tiles jointed with grey cement and pigment laid in floor over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 31 | Material and labour for plain cement concrete type B0, 1:2:4 (Using 12.5mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast, bed plates, filling hollow section of pressed steel frame and the like including use and waste of form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge. |
| 32 | Material and labour for 18-20mm thick prepolished granite stone slabs in steps, jambs, pillars, windows cills, cooking platforms, floors/ walls and the like laid over cement mortar 1:6, 20mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for design glazed ceramic coloured tiles in vertical surfaces 450x300x7mm/ 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick rendering /backing coat in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 34 | Dismantling posts or struts (wood, steel or RCC) any section post embeded in concrete brick work, masonery etc., including taking out embeded portion and making good disturbed ground complete all as specified and as directed by Engr-in-charge. |
| 35 | Excavation in post holes each not exc 0.50 cum in any type of soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and as directed by Engr-in-charge. |
| 36 | Material and labour for plain cement concrete type C2, 1:3:6 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 37 | Supply and fix for mild steel work as in posts and strut in fencing including cutting tops to shape as directed drilling holes notching for wire etc., complete all as specified and as directed by Engr-in-charge. |
| 38 | Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts, etc., including provission of binding wire complete all as specified and as directed by Engr-in-charge.Note: MS nut bolts, round bars and flats etc., shall be measured and paid seperately under relavent items as supply only. |
| 39 | Supply only 4mm dia GI chain link MS galvanised fencing, any size or type complete all as specified and as directed by Engr-in-charge. |
| 40 | Taking down cement plaster on brick or stone wall, concrete surface etc., including racking out joints, hacking for key scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge.Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. |
| 41 | Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including necessary scaffolding complete all as specified and as directed by Engr-in-charge. |
| 42 | Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even etc., including necessary scaffolding complete all as specified and as directed by Engr-in-charge. |
| 43 | Material and labour for rendering 5mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement including necessary scaffolding complete all as specified and as directed by Engr-in-charge. |
| 44 | Material and labour for preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted using mechanical means over a coat of primer with including necessary scaffolding upto 6th storey complete all as specified and as directed by Engr-in-charge. |
| 45 | Material and labour for preparing new plastered surface of walls and applying two coats of cement base paint using mechanical means over a coat of primer including necessary scaffolding upto 6th storey complete all as specified and as directed by Engr-in-charge. |
| 46 | Material and labour for preparing new plastered surface of ceiling and applying three coats of white wash including necessary scaffolding complete all as specified and as directed by Engr-in-charge. |
| 47 | Material and labour for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for preparation of newly plastered or unplastered concrete surfaces (obtaining smooth surface) of any description not otherwise described over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed by Engr-in-charge. |
| 49 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot's, moulds, moss and efflorescent salts and treating oily and greasy spot, holes and cracks with suitable material like white cement or plaster of paris and applying one coat of cement base paint, including necessary scaffolding upto 6th storey complete all as specified and as directed by Engr-in-charge. |
| 50 | Supply and fix in repairs at site of the TRAY PANEL SCREW type system with aluminium composite panel of approved colour on exterior walls, coloums, MS structure, ceiling, coping, slab, projectons at all heights and elevation including neccesary aluminium framework. The aluminium composite panel should 4mm thick consist of 3mm thick thermoplastic core of anti-toxidant LDPE sandwitched between 2 skins of 0.5mm thcik aluminium alloy sheet making a total panel thickness of 4mm. The external surface shall be finished with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint complete all as specified and as directed by Engr-in-charge.Note: The system shall be designed to withstand a wind pressure of 190 kg/sqm with necessary aluminium frames, cleats and shall be fixed to the masonry/ RC walls/ MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. Any other acessories such as fastening straps, nuts, bolts, rivets, washers, etc., other than anchor system shall be in Indian standard grade all joints of ACP must be sealed with approved sealent of approved colour şealant . Rate shall include to provide open cell polyethylene backer rods, weather sealant etc., all materials and labour complete. |
| 51 | Supply and fix in repairs 300mm size stainless steel letters, in Hindi/ English/ Kannada and fix with stainless steel screws complete all as specified and as directed by Engr-in-charge. |
| 52 | Removing demolished material i.e., building material concrete debris of any type etc., to a distance of 9 KM beyond and upto 10 KM out of premises of metropolition area including loading, unloading by manually or by mechanical means (JCB and to be transported through trolly or tipper) and staking at the destination as and when directed by Engr-in-charge during execution complete all as specified and as directed by Engr-in-charge. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
