|
| 1 | Excavating in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundation/ pipes/ cable etc, n. exc 10sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, in soil complete all as specified and directed. |
| 3 | Removing of excavated surplus soils, n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 4 | Material & labour for sand cushioning for PVC/XLPE cable with screened and washed sand and punning to provided a required covers all as specified and directed. |
| 5 | Supply and laying reinforced precast concrete cable cover, class LV, type 2 flat, size 300mm x 180mm x 40mm |
| 6 | Material & labour for Double wall corrugated HDPE Pipe, heavey duty for laying of electric cables cross-sectional area 80mm dia complete all as specified & directed. |
| 7 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed solid conductor 4 sqmm nominal cross section with 2 core in service connections or all as directed by Engr-in-Charge. |
| 8 | Supply & Laying, connection and testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 6 sqmm 2 core all as directed by Engr-in-charge. |
| 9 | Supply & Laying, connection and testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 10 sqmm 4 core all as directed by Engr-in-charge. |
| 10 | Supply & Laying, connection and testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 25 sqmm 3.5 core all as directed by Engr-in-charge. |
| 11 | Supply, laying and testing electric under ground XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 Core. |
| 12 | Supply, laying and testing electric under ground XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 Core. |
| 13 | Material and labour for cutting of tree-branches touching LT OH lines having grith exc 30cm and branches to a distance n.exc 50mtr and as directed |
| 14 | Taking down old Unsv bus bars chamber and Supply and install, testing and commissioning of Bus bar chamber of size 90 cm x 90cm x 40 cm outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories |
| 15 | (a) Incomming MCCB 63A - 01 No with suitable aluminum bus bar arrangement system. |
| 16 | (b) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V with selector switch - 01 |
| 17 | (c) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-100 Amps with selector switch with CT - 01 |
| 18 | (d) RYB neon indicating lamp set of three- 01 |
| 19 | Notes :- (i) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel (iii) Danger notice plate (02 Nos) LT size 20cmx 15cm shall be fixed on the panel (iv) Contractor provided power coated finish paint on panel. |
| 20 | M&L for renewal of plate earthing for LT panel with galvanised mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate electrode at one end and connected to metallic bodies of HT/LT equipments etc at the other, earth strip encased in and including 40mm bore GI medium grade pipe with all fittings from top of electrode to body of equipment fixed with and including 40 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work , etc complete all as specified and shown in electrical plate No 3 of SSR Pt-I. |
| 21 | -Ditto- all as per item No 25 above but using glavanised iron strip 25x4mm as earthing lead complete all as specified and directed by Engr-in-Charge |
| 22 | Supply and fixing LED Flood lights die cast aluminium corrosion resistant covered with toughned glass IP rating 65/66 ,power factor :>0.98 , THD <10% of wattage 150 watts , 100lm-120lm chip efficacy ; as per spcification operating voltage 90-300V/50HZ,CCt : 5700K-6500K with 1.5 mtr 1.5 sqmm 3 core with surge protection with complete accesories all as specified and directed by Engr-in-charge. |
| 23 | Supply and fixing in replacement of FTL to decorative post top 360 degree indirect light IP-65 ptotection, corrosion ressistat glare free lantern fitting 35/36 W LED complete set including LED lamp intigrated. |
| 24 | Supply, replace, testing and commisioning of LED street lights including providing of two core cable from poles to street light of length as required on the same pole with fittings having system of 70 watt all as directed by Engr-in-charge. Note : Hydraulic ladder will required for fixing the street light on LT pole. The rate for S&F street lights and hydraulic ladder are including in this item. No extra payment will made against hydraulic ladder. |
| 25 | Supply and fixing in replacement of LED Bollard 10 Watt LED fitting energy saving long life aesthetically designed metal body cone bollard with required nut, bolt, washer all as specified and directed of Jaquar Cat Part No OBL-GRY-LBLDCON010XW or Philips 800026/PH1801 or equivalents |
| 26 | Supply and fixing in replacement of garden light ground burial type fitting LED 12 watt complete set including LED lamp integrated, of make Corompton Cat Part No HPLLEDG11260 or its equivaalent. |
| 27 | Supply and fixing stay assembly comprising of stay bow glavanised 14mm dia x 400mm stay rod 16mmx1.80mtr long with nuts, bolts, washer, MS stay plate, two Nos thimble and clamps etc complete all as specified in electrical No-1 of SSR Part-I Note : Loop type insulator, excavation & earth work and concrete foundation shall be measured and paid separately under respective of Sch 'A' |
| 28 | Material and labour for pin type, porcelain votrcous white, brown or insulators incl one gaivanized MS spindle, two glacanized iron washers & one GI nut,100mm hight, 65mm dia 1100 Volts grade complete all as specified and directed. |
| 29 | Material and labour for shackle type, insulator porcelain votrcous white including glaivanized MS strips washers & nuts working pressure 1100 Volts, 100mm high and 115mm dia complete all as specified and directed. |
| 30 | Material and labour for cross arms, bracing, supports, back plate & clamps faricated from structural steel section including nuts, bolts, washer cuttings, welding bending cold or hot, drilling holes for bolts in any shape for bolts inany shape of size inclusive of painting with 2 coats of aluminium paint over a coat of primer complete all as specified and directed. |
| 31 | M & L for PCC 1 : 3 : 6 type C-2 using 40mm grade stone aggregate for foundation of stay/ pole/ strut as per specified and directed. |
| 32 | M & L for PCC 1 : 3 : 6 type C-1 using 20mm graded stone aggregate for Coping of above gound level including necessary from work, finishing to exposed surface even and smooth without using extra cement complete all as specified and directed. |
| 33 | Material and labour for brick work with sub class 'B' bricks straight or curved on plain exceeding 6 metre mean radius built in cement mortar (1:4), complete all as specified. |
| 34 | Taking down old unsv and supply & fix MCCB AC, 415 volts, 4 pole adjustable type, 250 Amps, breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge (Make : Legrand, ABB, C&S, Havells) |
| 35 | Taking down old unsv and supply & fix MCCB AC, 415 volts, 4 pole adjustable type, 200 Amps, breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge (Make : Legrand, ABB, C&S, Havells) Material and Labour for Testing of water from approved Govt lab samples collected from pump house No-01 at main Gate as per norms of WHO and submission of test reports to the entire satisfaction of Engineer-in-Charge, the test report includes following parameters:- PH value, TDS(mg/l), Hardness (as CaCO3) (mg/l), Fluoride (mg/l), Chloride (mg/l),Turbidity (NTU), E.Coli (cfu), Free residual Chlorine Please Enable Macros to View BoQ information |
