|
| 1 | Supply, erection and replacement of the existing deteroiated existing deteriorated 5 panel RMU unit into 6 panel RMU unit at existing AIR RMU yard, Rangapillai street under the jurisdiction of Town South O&M area, Puducherry |
| 2 | Supply, Erection and commissioning of 11KV, 630A, 21 KA /3 sec, 3way Outdoor type extensible type Motorized RMU comprising of 2way Isolator & 1 Circuit Breaker (SF6) Aegis Type CC +M+LLLV+ as enclosed with FRTU of type CC+M+LLLV with FRTU and allied accessories as per the specification enclosed |
| 3 | Supply of 11KV (E) 3C x 95 Sq.mm XLPE HT UG Cable (Conforming to IS:7098) (Part-II-1985). |
| 4 | Labour charges for Laying of one run of XLPE power cable of grade 11KV 3 x 95 Sq.mm direct in ground including excavation of trench of size 0.5 m (W) x 1.2m (D), sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road. |
| 5 | Supply and providing of heat shrinkable long sleeve indoor type cable end termination kit including required aluminum ferrule and other joining materials suitable for 11KV 3 x 400 Sq.mm XLPE power cable at Transformer end as specified in the tender specification. |
| 6 | Supply and providing of heat shrinkable long sleeve indoor type cable end termination kit including required aluminum ferrule and other joining materials suitable for 11KV 3 x 95 Sq.mm XLPE power cable at Transformer end as specified in the tender specification. |
| 7 | Supply and providing of heat shrinkable long sleeve indoor type cable end termination kit including required aluminum ferrule and other joining materials suitable for 11KV 3 x 50 Sq.mm XLPE power cable at Transformer end as specified in the tender specification. |
| 8 | Supply of RCC Trough as specified in the drawing enclosed. |
| 9 | Earthing of RMU by using 50 mm dia G.I. pipe including excavation of earth pit, fabrication of earth pipe, providing required charcoal, salt and earth pit with lid as per the direction of the Engineer -in -charge. |
| 10 | Supply and erection of FRP top roof for RMU as specified in the tender specification. |
| 11 | Supplying and concerting the cable route marker plate along the cable route at the location directed by the Engineer -in -Charge. |
| 12 | Preparation and supply of 5 copies of cable route layout drawing pasted using fevicol adhesive on cloth in the Scale of 1:5000 and submission of test report, Contractor's completion certificate and commissioning of 11 KV cables as specified in the Tender specification. |
| 13 | Removal of surplus earth, transportation of surplus materials, if any, to stores section office including coiling the unused cable provided with end caps for both cable ends and removal of cable drum and other materials and unloading at the central office section office as per the direction Engineer - in – Charge. Please Enable Macros to View BoQ information |
