|
| 1 | Items: |
| 2 | Adrenaline Zone -Designing of structural as per EN 15567 & t12572, IS 800:2007, effect of climbers loading during climbing and fallingincluding Foundation design and providing details drawing of allconnections and structure with case study as per Daman condition. (The system shall be safe and verified by the Third party as directed by he engineer charge) |
| 3 | Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and disposing of the excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto 100m for 10 Cum. |
| 4 | Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(E) Hard Rock and soil. |
| 5 | Providing material and labour for filling in foundation and plinth with RUBBLE under floors including filling gravel in gaps consolidating deposited layers by ramming water etc. Complete. (R.A) |
| 6 | Filling foundation and plinth with murrum or selected soil in layers of 20cm. Thickness including watering, ramming and consolidating etc. Complete. |
| 7 | Providing material and labour for cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) with shuttering steel and curing complete including cost of formwork in (A) Foundation and Plinth as directed by engineer incharge completed. (R.A) |
| 8 | Providing material and labour for laying machine mixed/machine batched/RMC controlled cement concrete M.250 using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregate confirming to IS 383 with minimum cement content as per IS456 (without flyash) for durability shall be followed as per approved design mix & latest 15456 for reinforced cement conrete work for all elements, all floors,all heights/depths, any lead and lift including cost of formwork with sheathing steel scaffolding, staging, vibrating, compacting, finishing and curing complete but excluding cost of reinforcement for reinforced concrete work in Foundations, footings, Base of columns and Mass concrete, as directions of Engineer in charge Complete. (R.A) |
| 9 | Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in positioncomplete upto floor two level. |
| 10 | Providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes (A) 10mm to 16mm dia bar |
| 11 | Providing and Fixing of Foundation/Anchor Bolts in RCC Pedestal at any level including maintaining the accuracy towards line, level & position. Foundation Bolts will be supplied by Vendor including template. Contractor will take due care for its threads and rusting by applying Greece and cotton waste / PVC Cap. |
| 12 | All Structural tower all supporting structure / columns & RC Towers –Structural steel work TATA, SAIL, JINDAL OR JSW in compoundgirders or stanching built up from two or more RS joints or Pipe sectionor plates, angle etc welded including cutting and fixing all lattice bars,stiffeners, gusset plates, bolts, buts, welding rods etc completed withflange plates, heads, sole plates, angle connections etc with hoisting anderecting required structure fixing or erecting on nut bolts. StructuralEngineering in compliance withEN 12572 & EN 15567 and IS standards.All the cables and related accessories also as per IS / BIS / Globallyaccepted standards (as per engineers instructions). The metalstructures to be GI coated as per required 60 micron thickness forcoastal areas. All towers and structures should be designed andfabricated as per the site layout and event length. The system shall besafe and verified by the third party as directed by the Engineer-in- charge. |
| 13 | Supplying and fixing of HT Bolts round holding down of anchor bolts with nuts and washer plates complete. |
| 14 | Providing and fixing Aluminium Chequered plate 2 mm thick including transportation completed etc. |
| 15 | Supplying, laying and fixing at any height of 0.5 mm thick Pre-colorcoated Galvalume sheet accessories as per the properties described inproper position of ridges, corner pieces, apron pieces etc. includingcutting, lap, wastage, breakage, butyl sealer, neutral curing siliconerubber sealant, etc. Complete as directed. Measurement shall be on net length. |
| 16 | QuickFlight XL is the next step in the evolution of free falldevices. It provides an extended, true free fall sensation andincorporates our advanced magnetic braking technology for a smoothcatch to offer thrill seekers a one-of-a-kind experience.Dimensions: 80 x 320 x 216 mm Device Weight: 25 kg(without the mount and other accessories)Rated Working Capacity: 20 to 130 kg Minimum Mounting Height - 12 m (39.4 ft)Maximum Mounting Height - 21.8 m (71.5 ft)Minimum Distance - Nozzle to Platform: 1.8 m to 2.1 mJump Over Configuration: YesTrue free fall with a soft catch and eddy current magnetic braking forsmooth and consistent braking. |
| 17 | Supplying & fixing GRP/FRP Boards should be a blend of atleast 8 mm thick textured and High relief FRP Boards or High relief thickSilica textured, 8 to 12 bolt-on-grips inserts per sq. mts. Panels shouldbe certified with EN 12572 - 1. (With a reliable top support 3 no. ofdevices with magnetic braking system (even in wet conditions), friction-free, and self-regulating, providing the same rate of descent regardlessof a user’s size or weight. Unassisted upward movement, rather thanpulling participants up the wall. Boards will be fixed on Thrill Tower.Height 15 meters X 5 metersRecreational wall system comprising approximate climbing surface areaof 90 sq m will be custom designed for various techniques frombeginner to advance panels & support structureGRP/FRP Recreational Boards Thickness: textured and low relief FRPpanels 8 mmStainless Steel Nuts (bolt-on grip inserts per sq. meter)8 to 10Top rope Hanger anchors of international standard: 4 NoSilica textured and high relief FRP Boards: Yes |
| 18 | Polyester resin Grips should be a blend with Silica textured, Gripsshould be compliance with EN 12572 - 3 (different sizes, shapes & colours) |
| 19 | All main tower and supporting towers make of steelTATA/ SAIL/ Jindal or JSW with Round pipe length of 200 m, wire ropes,and installation, Supplying & fixing of minimum 200 meters lengthAdrenaline ride, with all the required support system & accessories asper Globally accepted standards. Event starts on Thrill Tower.product combines the thrill of Zipline, Roller coaster and Paragliding in a singleride. Dotted with twists and turns, it has become most attractive andpopular adventure set-up.Activity Length: 200 m Long (longest in India)All Adrenaline Ride running pipe: 200 m long Round Pipe with 100 mm ODStrung with GI Cables: 8 mm to 10 mmU-clamp, Turn Turnbuckle & Thimble: Indian and International STDAdrenaline Ride Ending Point Slider platforms: YesSuspended from trees with steel cables;which is attached to a comfortable safety seat. All materials andmechanisms are calculated taking into account safety requirementsaccording to the relevant technical standards Ride Speeds of up to 35 km/h30 to 40 km/h ,Gravity-propelled motion for an adrenaline-filled experienceAll Supporting towers and should be designed and fabricated as per thesite layout and event length. |
| 20 | Providing and Supplying of Adrenaline Trolleys including loading unloading and transportation etc. completed as directed. |
| 21 | consisting on steel structure TATA, SAIL, JINDAL OR JSWwill be custom designed for various techniques from beginner.Elements for Kids and Youth: Gravity Ride, Adrenaline Ride, FRP BoardBoulder, Slithering, FRP Tunnels, Low Level Challenge Course, Climbingladder, Two FRP Slider, Total: 18 ElementsLow Level Challenge Course event built on GI Steel Structure. EN 15562and Indian StandardsAll Low Level Challenge Course build by 10 MM & 12 mm GalvanizeSteel Ropes.Each Low Courses event made by FRP Element.4 M Length each ElementsAll Challenge courses build with standard galvanised steel U-Clamps, I-Bolts, thimbles and shackles.System and other specially designed activities, accommodates 25 Kids at a time.Galvanized aircraft grade10 mm or 12 mm cable: Yes |
| 22 | PART - H :- Pre Handover inspection, and inspection Once a years for5 Years - by ACCT certified inspector Please Enable Macros to View BoQ information |
