Tender For Biennial Rate Contract For Plumbing/Masonry Carpentry/Painting And Allied Work For Residential Building/ Qtrs In Navi Mumbai., Mumbai-Maharashtra

TDR : 55578577

Tender Notice
BOQ

16 Days Left

Mumbai , Maharashtra

Tender Brief : Tender For Biennial Rate Contract For Plumbing/Masonry Carpentry/Painting And Allied Work For Residential Building/ Qtrs In Navi Mumbai.

Document Fees
Refer document

EMD
₹ 420000.0 /-

Tender Value
Refer document

Submission Date
09-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Providing and fixing C.P. Cover of Nahni traps (75 mm to 150 mm) including removal of old one if any.
2	Replacing Nahni traps : Replacing the existing broken and unserviceable Nahni traps with water proof joints including testing; and completing all as directed.PVC Nhani trap 75 mm dia.
3	Replacing Nahni traps : Replacing the existing broken and unserviceable Nahni traps with water proof joints including testing; and completing all as directed.PVC Nhani trap 100 mm dia.
4	Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed15 mm pvc inlet pipe connector.(600 mm approx.).
5	Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed 32/40 mm CP Bottle Trap (Gem or equivalent make).
6	Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed 32/40 mm dia pvc pipe for wash basin & flush tank outlet for EWC including fittings etc.
7	Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed 32 mm PVC outlet flexible pipe (750 mm length).
8	Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed CP Bent pipe (15 mm dia. for gyser inlet and outlet).
9	Providing and sealing with Polysulphide sealant in joint of size 25mm x 25mm so as to make the joint completely water tight etc. and completing as directed.
10	Removing the loft water tank, cleaning & refixing of 500/750 Liters including replacment of bottom old detirioted ply with 18mm marine ply if required, repairing the supports and making good and completing deteriorated.
11	Providing and placing on terrace/ loft (at all floor levels) polyethylene water storage tank, ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with existing fittings and the base support for tank.
12	Providing and fixing drainage pipe fittings specials 'Y' like bend with access door including rubber washer and bolts, plain bend, collar, junction, terminal guards etc. including joint with cement/lead caulking and dismantling the old and damaged one if any 100 mm dia C.I Soil fitting.
13	Providing and fixing drainage pipe fittings specials 'Y' like bend with access door including rubber washer and bolts, plain bend, collar, junction, terminal guards etc. including joint with cement/lead caulking and dismantling the old and damaged one if any 75 mm dia C.I Soil fitting.
14	Providing and fixing drainage pipe fittings specials 'Y' like bend with access door including rubber washer and bolts, plain bend, collar, junction, terminal guards etc. including joint with cement/lead caulking and dismantling the old and damaged one if any100 mm dia PVC fitting.
15	Providing and fixing drainage pipe fittings specials 'Y' like bend with access door including rubber washer and bolts, plain bend, collar, junction, terminal guards etc. including joint with cement/lead caulking and dismantling the old and damaged one if any 75 mm dia PVC filling.
16	Providing and fixing drainage waste and vent pipes of approved make including dismantling the old and damaged one if any and depositing the same as directed with proper Clamping/grouting/opening in wall and making wall good etc.; and completing.100 mm dia. Sand C.I soil waste pipe.
17	C.I soil waste pipe 75MM providing and fixing drainage waste and vent pipes of approved make including dismantling the old and damaged one if any and depositing the same as directed with proper Clamping/grouting/opening in wall and making wall good etc;complete.75 mm dia. Sand C.I soil waste pipe.
18	providing and fixing drainage waste and vent pipes of approved make including dismantling the old and damaged one if any and depositing the same as directed with proper Clamping/grouting/opening in wall and making wall good etc; and completing.100 mm dia. pvc pipe.
19	Providing and fixing drainage waste and vent pipes of approved make including dismantling the old and damaged one if any and depositing the same as directed with proper Clamping/grouting/opening in wall and making wall good etc; and completing.75 mm dia. pvc pipe.
20	Removing chokage of water closet & sewage lines including cleaning of gulley traps etc.
21	Removing chokage of Urinal and waste trap, wash basins & sinks including cleaning of gulley traps etc. and completing.
22	Removing chokage of rain water pipe including opening, cleaning and refitting of pipe; and completing.
23	Providing and fixing M.S./G.I. clamps with iron nail for pipe and fitting at all levels including removing the old and damaged one if any and depositing the same as directed.150mm /100mm / 75 mm dia. Pipe.
24	Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed. Brass bib cock 15 mm nominal bore.
25	Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed.CP brass bib cock 15 mm nominal bore.
26	Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed.Brass stop cock 20 mm nominal bore.
27	Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed. Brass stop cock 25 mm nominal bore.
28	Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed.CP stop cock 15 mm nominal bore.
29	Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed.CP Pillar cock 15 mm nominal bore.
30	Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed.Fancy CP Pillar cock 15 mm nominal bore.
31	Providing and fixing of Fancy Brass items mentioned below of approved quality including dismantling the old and damaged One, if any, and depositing the same as directed.CP Stop cock 15 mm nominal bore (open).
32	Providing and fixing of Fancy Brass items mentioned below of approved quality including dismantling the old and damaged One, if any, and depositing the same as directed.CP Stop cock 15 mm nominal bore (concealed).
33	Providing and fixing of Fancy Brass items mentioned below of approved quality including dismantling the old and damaged One, if any, and depositing the same as directed.CP bib cock 15 mm nominal bore
34	Providing and fixing 32 mm to 40 mm CP brass waste coupling for wash basins,sink, etc. Including removal of old and damaged one if any, and depositing the same as directed.
35	Providing and fixing above 40 mm CP brass waste coupling for wash basins,sink, etc. Including removal of old and damaged one if any, and depositing the same as directed.
36	Dismantling wash basin, sink etc. including waste fittings, brackets etc and depositing the same as directed
37	Carefully dismantling the existing wash basin with all it's fitting and refixing the same with it's fitting; and completing all.
38	Providing and fixing white vitreous china wash basin including 32 mm dia CP waste coupling, C.I. bracket painted white including dismantling the old and damaged one if any, depositing the same as directed Size 630 mm x 450 mm (Approx.) (Hindware/HT/Parryware/Cera /equivaklent make).
39	Providing and fixing white vitreous china wash basin including 32 mm dia CP wate coupling, CI bracket painted white including dismantling the old and damaged one if any, depositing the same as directed Size 550 mm x 400 mm (Approx.) (Hindware/HT/Parryware/Cera /equivaklent make).
40	Providing and fixing white vitreous china pedestal type (Hindware/HT/Parryware/Cera /equvivalent make ) water closet pan of approved make including dismantling the old and damaged one, if any, and depositing the same and disposal of rubbish and making all complete (European type).
41	Providing and fixing white vitreous china pedestal type (Hindware/HT/Parryware /ceraor equivalent make) water closet pan of approved make including dismantling the old and damaged one, if any, and depositing the same and disposal of rubbish and making all complete. Anglo - Indian type.
42	Removing wherever required and refixing pedestal type water closet with all its connections with fresh water proof joints.
43	Providing and fixing plastic seat and cover with lid for pedestal type WC pan with CP brass hinges rubber buffers etc; and making complete.Black.
44	Providing and fixing plastic seat and cover with lid for pedestal type WC pan with CP brass hinges rubber buffers etc; and making complete.White.
45	Providing and fixing plastic seat and cover with lid for pedestal type WC pan with CP brass hinges rubber buffers etc; and making complete.Only CP brass hinges with rubber buffers.
46	Providing and fixing in position approved white glazed Indian type Orrisa water closet pan (Hindware/Hindustan/ Perryware/Cera or approved make) 530 mm long with ceramic Trap including breaking walls, floor and making good the same, making inlet.
47	Repairing flushing tank by adjusting float valves, lever-arm or by refit siphon bells in proper positions and refixing to stop the leakages; and making complete.
48	Providing and fixing/replacing flushing tank siphon bell including dismantling the old and damaged one if any and depositing the same as directed. for PVC (high or low level) flush tanks.
49	Repairing and replacing siphon washer for the low level/high level flushing tank; and making complete.
50	Providing and fixing flush tank handles including the removal of old and damaged one if any and depositing the same as directed.CP handles.
51	Providing and fixing flush tank handles including the removal of old and damaged one if any and depositing the same as directed. PVC handles.
52	Removing wherever required and refixing flushing cistern with all its connection with fresh water proof joints. Low level flushing cistern.
53	Removing wherever required and refixing flushing cistern with all its connection with fresh water proof joints.High level flushing cistern.
54	Providing and fixing 10 Ltr. low level flushing cistern of approved make with all integrated fittings such as lead valve, siphon, pvc connector, brackets etc. and PVC/ CP brass handle; all complete. PVC (Commander or equivalent ISI brand).
55	Providing and fixing 10 Ltr. high level flushing cistern of approved make with integral fittings such as ball valve, ball, lever, handle, pvc connector, outlet flexible pipe, brackets etc; all complete. PVC ((Hindware/HT/Parryware/Cera /approved make).
56	Providing and fixing ball valve (brass) with lever arm of approved quality complete including dismantling the old and damaged one if any and depositing the same as directed. High level or low level with plastic floats.15 mm nominal bore.
57	Providing and fixing only PVC/copper floats of approved quality including dismantling the old and damaged one if any and depositing the same as directed. Plastic floats 15 mm nominal bore.
58	Labour charges for removing and refixing or fixing new water heaters/Aquagaurd including dismantling and making connections complete.Instant geysers.
59	Removing and refixing of existing shower rose with 15 or 20 mm inlet including dismantling and making leakage rectification if any and making all complete as directed. 100 mm dia. CP brass.
60	Removing and refixing of existing shower rose with 15 or 20 mm inlet including dismantling and making leakage rectification if any all complete as directed.75 mm dia. CP brass.
61	Providing and fixing CP revolving type shower with 15 or 20 mm inlet including dismantling the old and damaged one if any and depositing the same a directed.a) 100 mm dia.
62	Providing and fixing wall mixer 3-in-1 system ( 3-way ) with provision of both the telephonic shower and overhead shower complete with 115 mm long bend pipe and wall flanges; and making all complete as directed.Jaquar Continental make 3-in-1 wall mixer (Cat No. 281).
63	Providing and fixing Hand shower (SBS Chrome plated) with Rubbit Cleansing system with 1.50 meter pvc tube and wall hooks; and making all complete as directed. Jaquar Continental make Hand shower (Cat No. 970).
64	Providing and fixing Swan neck pillar cock/tap with right hand or left hand operating knob for counter type wash basin including making hole in counter slab; and making all complete as directed. Jaquar Continental make Pillar cock (Cat No. 123 or 124).
65	Labour charges for fixing of Bathrooms fancy items like Soap dish, towel rods, stop cock, pillar cock, angle cock, shower, mixer etc; and making complete.(Bathroom fittings will be supplied by MDL).
66	Repairing leakages in taps/over flows etc. by supplying and replacing washers of pillar cocks, stop cocks, bibcocks, float valves etc. of wash basins, flushing tanks and freshwater systems.( Rate per leakage rectified.) 15 to 25 mm dia GI/PVC pipeline.
67	Repairs to leaks of inlet/outlet line of wash basins, sinks, flush tanks, showers, etc. by tightening with water seal compound, white lead, teflon or by brazing the joints etc; and making complete.
68	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Executive in Charge. Exposed on wall 15 mm nominal outer dia Pipes.
69	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completing as per direction of Executive in Charge. Exposed on wall 20 mm nominal outer dia Pipes.
70	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of jointscompleting as per direction of Executive in Charge. Exposed on wall 25 mm nominal outer dia Pipes.
71	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and completing as per direction of Executive inCharge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes.
72	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inCharge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes.
73	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inCharge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal outer dia Pipes
74	Providing & fixing of concealed GI Pipes including fittings, in floor, ceiling or wall including exposing the pipes and making good the damaged floor/ceiling/ wall excluding tile works including coal tar painting and wrapping with jute cloth, bitumen paper. All materials shall be supplied by contractor (Pipes should be 'C' grade) 20 mm nominal bore.
75	Providing & fixing of concealed GI Pipes including fittings, in floor, ceiling or wall including exposing the pipes and making good the damaged floor/ceiling/ wall excluding tile works including coal tar painting and wrapping with jute cloth, bitumen paper. All materials shall be supplied by contractor (Pipes should be 'C' grade) 15 mm nominal bore.
76	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 100 mm nominal bore.
77	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 75 mm nominal bore.
78	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 65 mm nominal bore.
79	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 50 mm nominal bore.
80	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 40 mm nominal bore.
81	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade)32 mm nominal bore.
82	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 25 mm nominal bore.
83	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 20 mm nominal bore.
84	Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 15 mm nominal bore.
85	Removing and refixing the existing exposed GI pipe lines for water supply including G.I clamps and making good the damaged surfaces including cutting, threading etc; and making complete. 15 mm to 25 mm.
86	Removing and refixing the existing exposed GI pipe lines for water supply including G.I clamps and making good the damaged surfaces including cutting, threading etc; and making complete. Removing 15 mm to 25 mm dia pipe only.
87	Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directed.40 mm.
88	Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directed. 32 mm.
89	Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces,plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directed.25 mm.
90	Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directed. 20 mm.
91	Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directed 15 mm.
92	Removing chokage in pipes including opening, cleaning the pipe and refitting completing with all operations; and making allcomplete. 15 mm to 40 mm nominal bore.
93	Supplying & fixing spindle to replace damaged one for bib cock/stop cock/pillar cock wheel valves etc; and making complete.15 mm to 25 mm dia.
94	Concealing the existing GI pipes with fittings with two coats coltar - paint gunny bag wrapping etc. including chasing in wall and making good the same. 40 mm to 50 mm.
95	Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed.75 mm nominal bore.
96	Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed.50 mm nominal bore.
97	Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed.40 mm nominal bore.
98	Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed.25 mm nominal bore.
99	Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed.20 mm nominal bore.
100	Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed.15 mm nominal bore.
101	Rectifying leakage in GI Water supply pipe and making good the lints water tight including dismantling, cutting, threading and refixing wherever necessary; all complete. 25 mm to 40 mm dia pipe.
102	Providing and fixing Hand shower (SBS Chrome plated) with Rubbit Cleansing system with 1.50 meter PVC tube and wall hooks; and making all complete as directed.
103	Providing and fixing Swan neck pillar cock/tap with right hand or left hand operating knob for counter type wash basin including making hole in counter slab; and making all complete as directed.
104	Providing and fixing in position Stainless steel kitchen sink without drain board A ISI 304 (18/8) as per IS 13983 610mm x 510mm depth 200mm with cast iron brackets and stainless steel plug 40mm including painting of fittings and brackets, including cutting and making good the walls, making inlet and outlet connections etc. complete as directed.
105	Providing & laying water proofing treatment to the toilet flooring/roof terrace etc including removing existing and smooth plaster in C.M.(1:3) over a layer of cement slurry and one coat of polycoat sodium silicate in flooring including necessary brick bat coba in C.M.(1:3); and making all complete. Area upto 2 Sq.M.
106	Providing & laying water proofing treatment to the toilet flooring/roof terrace etc including removing existing and smooth plaster in C.M.(1:3) over a layer of cement slurry and one coat of polycoat sodium silicate in flooring including necessary brick bat coba in C.M.(1:3); and making all complete. Area above 2 Sq.m upto 5 Sq.M.
107	Providing & laying water proofing treatment to the toilet flooring/roof terrace etc including removing existing and smooth plaster in C.M.(1:3) over a layer of cement slurry and one coat of polycoat sodium silicate in flooring including necessary brick bat coba in C.M.(1:3); and making all complete.
108	Providing & laying Plain Cement concrete (PCC-Cast in situ) including curing but excluding the cost of centering & shuttering etc; and making complete as directed.. UPTO PLINTH LEVEL --(1:1.5:3) Concrete (1 Cement:: 1.5 coarse aggregate: 3 graded stone aggregate 20mm nominal size).
109	Providing & Laying Plain Cement concrete (PCC-Cast in Situ)at any location, curing excluding centering, shuttering etc; and making complete as directed. -UPTO FLOOR FIVE LEVEL --(1:1.5:3) Concrete (1 Cement:1.5 coarse aggregate: 3 graded stone aggregate 20mm nominal size).
110	Providing & Laying Reinforced cement concrete in position excluding centering, shuttering, & reinforcement bars, including curing etc; and making complete as directed. UPTO PLINTH LEVEL --(1:1.5:3) Concrete (1 Cement:1.5 coarse aggregate: 3 graded stone aggregate 20mm nominal size).
111	Providing & Laying Reinforced cement concrete in position excluding centering, shuttering, & reinforcement bars, including curing etc; and making complete as directed. -UPTO FLOOR FIVE LEVEL --(1:1.5:3) Concrete (1 Cement:1.5 coarse aggregate: 3 graded stone aggregate 20mm nominal size).
112	CENTERING & SHUTTERING Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers,abutments, pillars, beams, posts and struts.
113	One Brick wall : Brick work with common burnt clay F.P.S. (non modular) bricks of class second in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)
114	Demolishing carefully brick work/ precast concrete block/Siporex block of any thickness including tile work, plaster etc as directed & disposal of debris / outside MDL premises to municipal dumping ground etc. and making complete as directed.
115	Demolishing carefully stone rubble masonry as directed & disposal of debris / un-serviceable material outside MDL premises to municipal dumping ground etc. and making complete as directed at any height / Location.
116	Providing and laying dry rubble stone soling/ packing handset thickness 150 mm to 200 mm including interstices being filled in with small pieces of stones, thoroughly rammed, consolidated and watered and making complete as directed.
117	Providing and laying 6\\" dia stoneware glazed pipe ( \\"A\\"Grade) for Sewer lines after removing the existing damaged line including excavation and refilling and making the joints leak free; and making all complete as directed.
118	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed in All kinds of soil.
119	Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
120	Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth at any height including disposal to muncipal dumping ground.
121	Providing & fixing IInd class Teak Wood in window /doors frames / shutters as per existing section in place of decayed portion and fixed in position by joining with the existing etc. including necessary screws, hinges, and making complete as directed.
122	Providing and fixing 35mm thick made laminated veneer lumber door shutter conforming to IS 14616 and TADS 15: 2001 ( Part B) including ISI marked black enameled M.S. butt hinges with necessary screws as per direction of Executive-in charge and panelling with panels.
123	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. and making complete :150x10 mm.
124	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. and making complete :100x10 mm.
125	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. and making complete.
126	Providing and fixing bright finished brass handles with screws etc. and making complete :125 mm.
127	Providing and fixing chromium plated brass night latch of approved quality like Godrej, Hitachi etc or as approved including necessary screws etc. and making complete.
128	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Executive-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Executive-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
129	Providing and fixing precoated galvanise Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws and making complete: Ridges plain (500 - 600mm).
130	Providing & fixing in position 0.50mm thick corrugated colour coated steel sheet comprises of cold rolled galvalume steel as per AS 1397, 550 MPa yeild stress with hot dip metallic coating on both side conforming to AS 1377 (150 gsm) including all necessary scafolding, shop drawings fixing with mechanically galvanized selfdrilling fastners, EPDM seals to make the roof leak proof, all fittings and fastners. etc. and making complete strictly as per manufacturers specification subject to approval of Executive. (No laps shall be measured and paid for).For Gutters.
131	Steel work in built up tubular ( round, Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. and making complete. Hot finished welded type tubes.
132	Providing and fixing Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and making complete as directed by executive.
133	Providing & fixing PVC Rain water pipes Providing & fixing PVC Rain water pipes conforming to I.S.13592-1992 including proper rain water receiving recess with PVC plug bend, necessary fittings such as offsets, shoes including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall and fixing with clips of approved quality and number, filling the joints using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocation of pipes. 110 mm outer dia. PVC pipe.
134	Providing & fixing PVC soil / Waste water pipes having wall thickness of 3.2 to 3.8mm conforming to I.S.13592-1992 including PVC plug bend, necessary fittings such as bend, tees, single junction, double junction, slotted vent offsets on walls or in the ground including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall and fixing with clips of approved quality and number, filling the joints using rubber gasket with solvent cement including necessary scaffolding and maintenance for 3 years for any leakages or dislocation of pipes. -75 mm dia. PVC pipe. (Prince or equivalent).
135	Dismantling of old plaster/pointing, Raking out joints and cleaning the surface for pointing including disposal of rubbish outside MDL premises excluding scaffolding.
136	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required including removal of existing damage chainlink fencing if any. Completing as per the direction of Executive-in-charge.
137	Providing and fixing bamboo scaffolding for repair works etc; and making all complete as directed. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. and making complete as per directions and approval of Executive in-charge. The elevational area of the scaffolding shall be measured for payment purpose The payment will be made once irrespective of duration of scaffolding. This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
138	Dismantling GI/Galvalume Sheet roofing upto 10mm thick including ridges, hips, valleys and gutter and stacking the serviceable materials within MDL premises and disposal of un-serviceable material outside MDL premises at Municipal Dumping ground etc and making complete as directed.
139	Fixing corrugated G.S./G.I/Galvalume sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint onoverlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), including cutting to size and shape wherever required.
140	Dismantling steel work manually/ by mech Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Executive-in-charge.
141	Refixing old glass panels with putty and nails.
142	New glass panels, with putty and nails wherever necessary including racking out the old putty Float glass panels of thickness 4 mm.
143	Providing and fixing curtain rods of 1.25 mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary and making complete. 25 mm diameter.
144	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Executive-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
145	Grouting of MS flat bar (Size 28\\" & 36\\") with studs in cement mortar for stair case nosing including dismantling the damaged one and smooth finishing of adjacent areas with mortar; and making all complete as directed.
146	Breaking of brick wall to make opening for installation of following equipments/items and making wall good by plaster etc as directed for Air Conditioner Unit./ Exaust Fan./ Door or Window Frame etc: and making all complete.
147	Repairing of existing kerbing using same/old bricks for Gardens, pathways etc., by hacking the existing kerbing up to Brick level and re-plastering it on top and sides with 1:4 cement plaster 20 mm thk. to be laid in two layers & disposing off the peeled.
148	Providing and applying bitumen on terrace or roof.
149	Exposing existing old and worn out RCC column, beams and slabs etc upto main reinforcement carefully by means of chisel and hammer including necessary scaffolding including carting away the material outside MDL premises to the municipal dumping ground etc and making complete as directed. (Surface area exposed after final chipping chiseling etc shall only be measured and paid for).
150	Providing and applying POLYMER MODIFIED MORTAR(PMM) in proportion of 1(Polymer) : 5(Cement) : 15 (Quartz sand) by weight with water cement ratio of 0.35 including application of bond coat of Krishna Conchem or equivalent approved make using brush in ratio of 1 (Polymer) :1 (Cement) : 0.35 (water) byweight including cleaning of surface with air mixed with water under pressure, and subsequent layer upto 10mm after hardening curing; and making all complete.(Polymer manufactured by sunanda, pidilite, fosroc, acro- chem,build core or equivalent)
151	Providing and appying Polymer Modified Crack filler of Dr. Fixit/ Sunanda Conchem /Krishna Conchem or equivalent approved make including surface preparation like chiseling the existing cracks to form a V groove, cleaning the groove to remove all loose materials and washing with water before applying the crack filler at any height/location etc and making all complete as directed.
152	Providing and applying a priming cum bonding coat of polymer of Krishna Conchem or equivalent approved make and cement slurry in ratio 1:1 by weight to concrete area by brush and making all complete. (Cement0.005 Bag /Sq.M).
153	Removing existing corrosion in MS/ torsteel bars by means of suitable light tapping wire brushing and applying rust removal \\"Feovert\\" of Krishna conchem or equivalent approved make etc and making complete.
154	Providing & laying Polycrete \\"A\\" of M/s. Sunanda or equivalent approved make using 12.5% of water by weight of polycrete mix over a bond coat of approved make in the ratio of 1 polymer: 1cement, curing etc; and making all complete at any location / Height.
155	Providing and fixing Siporex concrete block masonry as per thickness required with 1:4 cement sand mortar including curing etc. and making complete as directed.
156	Providing Coolie or unskilled labour (8 hours per Coolie or unskilled labour (8 hours per day excluding Lunch break) for carrying out the work.
157	Providing Carpenter (8 hours per day excluding Lunch break) for carrying out the work.
158	Flooding wc/bath area with water by plugging traps/pan etc with cement mortar to check leakage and removing and cleaning the above after leak test etc.
159	Providing & fixing Fly / Mosquito proof Stainless Steel wire mesh grade 304 to anodised aluminium frames / shutters with necessary fixtures, fittings etc and making complete.
160	Dismantling carefully tile work laid in cement mortar & carting away the same outside MDL to Municipal dumping yard and making complete.For tile thickness upto 25mm.
161	Dismantling carefully tile work laid in cement mortar & carting away the same outside MDL to Municipal dumping yard and making complete. For tile thickness above 25mm.
162	Providing and fixing 1st quality ceramic glazed tiles conforming to IS 15622 ( thickness to be specified by the manufacure ) of approved make like RAK, KAJARIA, NITCO or approved make in all colours, shades of any size as approved (except burgundy, bottle green, black) in skirting, risers of steps and dadosover 12mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) and jointing with grey cement slurry @ 3.3 kg per Sq.m including pointing in white cement mixed with pigment of matching shade and making complete.(Basic cost of tile = Rs.450/Sqm).
163	Providing and laying Ceramic glazed floor tiles 300*300 mm ( thickness to be specified by the manufacure ) of 1st quality conforming to IS 15622 of approved make (RAK, KAJARIA, NITCO, Bells) in approved Colour / shade like white, ivory, grey, fume red brown etc laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) including pointing the joints with white cement and matching pigment etc. and making complete as directed.
164	Providing & laying polished vitrified floor in different sizes (thickness to be specified by the manufacturer) with (RAK, KAJARIA, NITCO, Bells) water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement morter 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. and making complete. -Size of Tiles 60cm X 60 cm (Base rate of material = Rs.700/Sq.M.).
165	Fixing glazed / Ceramic / Vitrified floor tiles with cement based high polymer modified quick-set tiles adhesive (water based) conforming to IS: 15477, using 5kg Adhesive per Sq.m of tiles area, in average 3mm thickness.
166	Providing and laying Kota stone slab flooring 25mm thick over average 20mm thick base laid over of C.M 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. and making complete as directed. (Basic rate of material = Rs.600/Sq.M.).
167	Providing and Fixing Granite of 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills, facias and similar location of required size of approved shade, colour and texture laid over 20mm thick base cement morter 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigments, epoxy touch ups, including rubbing,curing, moulding and polished to edge to give high gloss finish etc. and making complete at all levels as directed by Executive-In-Charge.Granite of any colour and shade Area of slab up to 0.5 Sq.m (Basic rate ofmaterial = Rs.1800/Sq.M.).
168	Providing and Fixing Granite of 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills, facias and similar location of required size of approved shade, colour and texture laid over 20mm thick base cement morter 1:4 (1 cement : 4 coarse sand ) with joints treated with white cement, mixed with matching pigments, epoxy touch ups, including rubbing, curing, moulding and polished to edge to give high gloss finish etc. and making complete at all levels as directed by Executive-In-Charge.-Granite of any colour and shade --Area of slab over 0.5 Sq.m (Basic rate of material = Rs 1800 )
169	Providing and fixing kadappa stone slab of 30-40mm thick for platform of required size in 1:4 cement mortar including providing & fixing border patti on front edge, filling joints with white cement mixed with matching pigment, curing, ceaning etc. and making complete as directed.
170	Labour charges for fixing of Marbonite/Vitrified tiles in floor and dado on existing floor surface including surface preparation to fix the tiles with suitable adhesive/Roff compound with all tools and tackles ; joint neatly finished with white cement.
171	Polishing Mosaic/Marble flooring by mechanical means in Three coats after suitable joint filling including supply of all materials, polishing machine to an approved finish Including waxing etc; and making complete.
172	Polishing mosaic skirting/marble skirting etc.by hand polishing including supply of all materials, labour etc., to an approved finish.
173	Providing, laying and fixing polished stone slabs of good quality in 1:4 cement mortar for flooring, etc. in sizes as directed by MDL including dismantling the old damaged if any, cutting to size & polishing wherever necessary (thickness not less than 18mm) Marble
174	Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. and making complete: 300x20x6 mm
175	Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. and making complete. 125x65x2.12 mm
176	Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors, (weighting not less than 450 gms).
177	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. and making complete.
178	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. and making complete.
179	Dismantling of old plaster/pointing, Raking out joints and cleaning the surface for pointing including disposal ofrubbish outside MDL premises excluding scaffolding.
180	Raised and cut pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand)excluding scaffolding.
181	Dismantling carefully damaged portion of cement plaster of any finish from the wall, ceiling, beams etc & raking out the joints to a suitable depth up to 20mm & carting away debris etc outside MDL premises to Municipal Dumping ground. and making complete as directed at any height / Location.
182	Providing and applying plastering on RCC/brick masonry work with 12 mm thick cement mortar (1:4) including curing & finishing with plaster of paris of 2mm thick etc; and making all complete as directed.
183	Providing and applying plastering on RCC/brick masonry work with 12 mm thick cement mortar (1:4) including curing etc; and making all complete as directed.
184	Providing and applying 20 mm thick waterproof cement plaster(1:4) in two coats for external surface mixed with approved waterproofing material as per manufacturer specification, curing etc; upto 10m height etc. and making all complete as directed.
185	Providing and applying 25 mm thick external sand faced cement plaster with neat cement rendering upto 10m from ground level and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat ofplaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc and making complete as directed By Executive In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.) In Cement mortar 1:3.
186	Providing & fixing the Safety Net with 12mm Border rope, 4mm knotted, 1mm fishnet size -15mm X 15mm mesh to prevent the debris falling on ground /walkway etc. as per the direction of Excutive in charge.
187	Covering the scafolding with Bardan (Agro Knitted Fabric) by sewing, knotting as required at any height of the building /structure while carying out external work of the building/structure etc. as per the direction of Executive in-charge.
188	Providing & applying 12 mm thick neeru finish cement plaster in CM 1:4 (in single coat) to concrete / masonry surfaces such as internal walls / columns, beams, etc. at all height and locations including curing, scaffolding etc. and making complete.
189	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. and making complete and stacking within 50 metres lead.
190	Providing & Grouting Hooks for fan etc in RCC ceiling & making good the surface; and making all complete as directed.
191	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including removing the existing old tiles and dumping the debris to municipal dumping ground and making complete: a) Boring holes in the wall and making good the same with cement plaster (upto 100 mm to 150mm size).
192	Applying white cement with water proof compound to the existing leaking tiles joints (after cleaning joints). With materials supplied by contractor and making Complete, making site clean.
193	Providing CI brackets including cutting of walls, fixing and grouting and removal of old damaged one if any,and making complete including painting etc. For Kitchen Sink or wash basins etc.
194	Providing and fixing aluminium louvered windows consisting of vertical arm (40 x 12mm) with holders, lever and locking arrangement weighing at 0.91 kg/m with 3mm thick sheet glass louvers including filling the gap in joints of cladding and external/internal adjoining portion with plaster silicon jelly with gun etc and making complete.
195	Removing of aluminium window and refixing the same with all necessary materials. Area Upto - 2 Sq.m.
196	Removing of aluminium window and refixing the same with all necessary materials. Area above 2 Sq.M and Upto - 5 Sq.m.
197	Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, Anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15), fixedwith rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle,.Aluminium snap beading for glazing/ panelling, CP brass/ stainless steel screws, and making all complete as per drawings and the directions of Executive in Charge (Glazing and panelling to be paid for separately).
198	Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, Anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15), fixedwith rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,.Aluminium snap beading for glazing/ panelling, CP brass/ stainless steel screws, and making all complete as per drawings and the directions of Executive in Charge (Glazing and panelling to be paid for separately) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots/ handles/rollers andmaking provision for fixing of fittings wherever required etc and making complete.
199	Providing and fixing glazing in wooden/aluminium door, window, ventilator shutters and partitions etc with PVC/ neoprene gasket etc and making complete as per the architectural drawings and the directions of executive in charge (Cost of aluminium snap beading shall be paid in basic item ) Make of glass Saint Gobin, ASAI, Modi Float or equivalent -With float glass panes of 4.0mm thickness (weight not less than 10.0 kg/ Sq.m)
200	Providing and fixing glazing in wooden/aluminium door, window, ventilator shutters and partitions etc with PVC/ neoprene gasket etc and making complete as per the architectural drawings and the directions of engineer in charge (Cost of aluminium snap beading shall be paid in basic item ) Make of glass Saint Gobin, ASAI, Modi Float or equivalent With float glass panes of 5.5mm thickness (weight not less than 13.75 kg/ Sq.m).
201	Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc and making complete as per direction of Executive-in-Charge. Anodized (AC 15) aluminium tubular handle bar.
202	Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. and making complete.
203	Providing and fixing Aluminium Composite Panels (ACP) made out of 4 mm thick (0.25+3.5+0.25) with LDPE core coloured, matt finished panels on both sides (total thickness of the panel shall be 4mm) of approved shade ACP Z-Green fixed with aluminium frame work 40mm x 20mm (Jindal section no. 14019/88) or equivalent approved including making openings for lighting fixtures, sealing joints with weather sealant, M.S. cleat, fastener, nut bolt with scaffolding etc. and making complete.
204	Providing & fixing MS ornamental grill of approved design weighing from 15 to 20 Kg / Sq.M. With necessary hold fast , complete with two coats of synthetic enamel paint of approved make & quality over a coat of approved anti corrosive yellow zinc chromate metal primer etc and making all complete.
205	DESIGN MIX CONCRETE: Providing & laying in position machine batched, machine mixed & machine vibrated Design Mix M-30 Grade reinforced cement concrete Concrete work, using cement content as per approved design mix, includingpumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing & reinforcement, including admixtures in recommended proportions (as per IS 9103) to accelerate / retard setting of concrete improve workability without impairing strength and durability as etc; and making complete as directed @ using 340 kg of cement per cum of concrete.
206	Providing & fixing in position reinforcement bars including straightening, cutting, bending, placing in position & binding with binding wires / welding where ever necessary for slabs / beams / columns / footing/pile etc. and making all complete as directed at any location ( Lapping / chairs will be measured & paid) Thermo-Mechanically Treated bars.
207	Supplying, providing and laying dry stones pitching/ soling of 225mm thick including preparation of surface and making complete.
208	Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of thelock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer'sspecifications and direction of Engineer-in-charge including ISI marked M.S. pressed butt hinges bright finished of size 125x65x2.12 mm with necessary screws, removing old shutter, complete.
209	Removing dry or oil bound distemper, enamel paints, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
210	Providing and applying cement paste for filling the undulation due to scraping, to make the surface smooth and in plumb and providing and applying wall care puttey 2mm thick of approved brand and manufacture (Birla, JK, Nerolac, Asian, wallpast or equivalent as approved by MDL) over finished surface to prepare thesurface even and smooth including application of bonding coat of cement paste as well as pre-wetting, scaffolding, curing etc. complete as directed.
211	Providing and applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface ( Sherwin-williams, or Asian Paint/ Nerolac/Berger or equivalent as approved by MDL) One coat over plaster before putty.
212	Providing and applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface ( Sherwin-williams, or Asian Paint/ Nerolac/Berger or equivalent as approved by MDL) one coat over putty before paint.
213	Providing and applying ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
214	Providing and applying synthetic enamel paint/flat oil paint of approved brand and manufacture of required colour( Sherwin-williams, or Asian Paint/ Nerolac/Berger or equivalent as approved by MDL) to give an even shade for doors, windows, fans, light filltings and walls etc: Two or more coats on old work.
215	Providing and applying Wall painting with plastic emulsion paint of approved brand and manufacture ( Sherwin-williams, or Asian Paint/ Nerolac/Berger or equivalent as approved by MDL) to give an even shade : Two or more coats on old work.
216	Providing and applying 1st quality acrylic washable distemper (ready made) of approved manufacturer (Sherwin-williams, or Asian Paint/ Nerolac/Berger or equivalent as approved by MDL) and of required shade and colour complete. as per manufacturer's specification. Two or more coats on old work.
217	Providing & Applying two coats of white wash with lime to give an even shade including removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as directed.
218	Finishing walls with water proofing cement paint of required shade including scrapping. -Old work (one or more coats applied@ 2.20 kg/10 Sq.m) over priming coat of primer applied@ 0.80 litrs/10 Sq.m and making complete including cost of Priming coat.
219	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on -Old work (Two or more coats applied@ 1.43 ltr/ 10 Sq.m) over existing cement paint surface.
220	Providing and applying two coats of Aluminium paint of approved brand & manufacture to give an even shade to structural steel including cleaning, wire brushing and surface preparation etc; and making all complete.
221	Providing & applying two coats of appex ace white exterior paint of approved manufacture & of approved colour to the plastered surfaces including cleaning, preparing the plaster surface , applying primer coat,scaffolding if necessary & watering the surface for two days and making complete.
222	Providing and fixing 1.5 mm thick polyvinyl Chloride flooring including leveling the base with white cement including pasting with appropriate material , cleaning the surface etc complete.
223	Providing and applying two coats of Rust preventive coating of IPNET of Krishna Conchem or equivalent approved make after cleaning the existing surface from dust/ loose particles by applying air water under pressure etc complete as directed
224	Providing and applying Bonding coat between concrete members like RCC slabs, columns, beams, Chajjas, pardis etc and cement mortar plaster using HACK AID PLAST of M/s. Sunanda Speciality Coatings Pvt. Ltd. or equivalent as per the instructions of manufacturer or Engineer Incharge; including cleaning the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface at all heights/ levels and locations and as directed by Engineer Incharge
225	Fin StabilizerActuator Seal kit P.NO.-K35115390 Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Services Tenders

Painting Work Tenders

Painting Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Biennial Rate Contract For Plumbing/Masonry Carpentry/Painting And Allied Work For Residential Building/ Qtrs In Navi Mumbai., Mumbai-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Biennial Rate Contract For Plumbing/Masonry Carpentry/Painting And Allied Work For Residential Building/ Qtrs In Navi Mumbai., Mumbai-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us