Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil |
| 3 | Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti teRmite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external periRm of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion) . |
| 4 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20% |
| 5 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 6 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M25 grade Design Mix by using min 410 kg of cement per Cum . |
| 7 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nosminal Mix / Design Mix |
| 8 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 9 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of foRRmwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 10 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel confoRRming to IS:1786) TheRRmo-mechanically Treated bars (ConfoRRming of relevent IS code) |
| 11 | Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Grade 304 |
| 12 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 13 | Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. |
| 14 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 15 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 16 | Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 75 mm thick |
| 17 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 18 | Add extra providing and placing in position 2 Nos. ,6mm Ø M.S. bar at every third course of half brick masonry . |
| 19 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 25mm thick . |
| 20 | Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm Nosminal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement |
| 21 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . |
| 22 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) |
| 23 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) |
| 24 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect |
| 25 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 27 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 28 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 29 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm |
| 30 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 1501 Cm2 to 3600 Cm2 Tiles |
| 31 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work Full Edge moulding |
| 32 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platfoRRm, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete |
| 33 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 34 | Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design). |
| 35 | Providing factory made pvc internal door frame of size 100mm x 45mm with a wall thickness of 5mm (±0.25), made out of extruded 5mm (±0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company,and by joining 3Nos. heat bent PVC sheet sections.The inside section of size 90x30mm shall be made from plain colour PVC sheet of 5mm (±0.25) thickness. The inside section will be covered by sticking two sections of size 30x35mm and 70x45mm made from 5mm (±0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and joined with 4Nos. of 150mm long brackets of 15mm x 15mm M.S. Square tube. The two vertical door frames are to be reinforced with 40mm x 20mm M.S. tube of 19 guage through out the frame. The door frame shall be fixed to the wall using 8/100mm long M.S. Screws through the frame by using anchor fastners. A minimum of 4Nos. of screws to be provided for each vertical member & minimum 2Nos. for horizontal member etc. complete as per manufactures specification and direction of Engineer-in-charge. Minimum Compissive Stength of 58 N/mm2, Moduus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being teRmite / borer proof , water / Moisture Proof & Fire retardant & Fixed in postion with SS Dash Fasterns / Hold Fast of reuired dia and lenght, all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company ( Hold Fast or Dash Fastners shall be paid seperately) |
| 36 | 30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side foRming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to foRm top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to foRm lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.(For W.C.and bathroom door shutter). |
| 37 | Providing and fixing pressed steel door frames confiRming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : profile c |
| 38 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using PheNosl foRRmal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 35 mm thick . Decorative teak veneer both side |
| 39 | Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica |
| 40 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. :With stainless steel cover plate |
| 41 | Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. |
| 42 | Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & theRmal welded so as to foRm window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of acCumulated water, if any, to outer side.Shutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & theRmal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter shall be made of 39w x 69h mm Extruded 3 box multi-chamber UPVC Window profile section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut & theRmal welded at all corners and fitted with nylon/polymer mesh and rollers/pully. |
| 43 | Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm Nosminal size) |
| 44 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 45 | Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Rm x 1 Rm x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete. |
| 46 | Providing & laying broken glazed titles on roof ( broken glazed tiles Nost less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. |
| 47 | Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Ivory coast wood Grade I |
| 48 | Providing & Fixing Premium Quality white glazed vitreous china Sanitary Wares (IS:2556 Mark) of approved make as per direction of Engineer-in-charge including cutting and making good the wall and floor.Universal (anglo-Indian type) with P or S trap |
| 49 | Providing & Fixing premium qulaity WVC Urinal with PVC waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (small) size 440x265x315 mm. |
| 50 | Providing & Fixing premium qulaity W.V.C. Urinal Partition plate of size 630x315 mm |
| 51 | P & F Premiumquality water closet Seat Covers with brass hinges complete Solid PVC (ISI marked) grade-I White for EWC. |
| 52 | P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : |
| 53 | P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 3 Urinals |
| 54 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. |
| 55 | P & F C.P. brass Doom Waste Coupling 32 mm dia. |
| 56 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 Nos. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 450 mm x 300 mm |
| 57 | Size 630 mm x 500 mm dia for counter top |
| 58 | Add extra for using 25mm GI waste pipe instead of PVC waste pipe |
| 59 | P& F waste Coulping with fittings of approved quality /make:C.P Brass 32 mm dia |
| 60 | P & F C.P. brass Urinal Spreader for Large Urinal of heavy duty of approved make as per direction of Enginner-in-Charge |
| 61 | P&F Looking Mirror 5mm thick of approved make with ornamental frame size 50x12 with 6mm Ply Board on Back Side Complete as per approved sample |
| 62 | Providing & Fixing Premium quality Bottle trap internal portion 32mm, size 250mm long wall connection pipe & wall flange as per approved by Engineer in Charge. |
| 63 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-chargePillar Cock 15 mm Nosminal size |
| 64 | Bib Cock with long thread 15 mm Nosminal size |
| 65 | Long body Bib Cock 15 mm Nosminal size |
| 66 | Two way Bib Cock 15 mm Nosminal size |
| 67 | 600 mm long towel rail |
| 68 | Jet Spray (Premium heavy Quality) as approved by Engineer-in-Charge |
| 69 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm Nosminal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe. (Excluding cost of pipe)150mm dia S.W. pipe |
| 70 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make110 mm dia |
| 71 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler 110mm dia |
| 72 | Bend 87.5 Dg. 110mm dia |
| 73 | Bend 45 Dg.110mm dia |
| 74 | Door Bend 87.5 Dg. 110mm dia |
| 75 | Socket Plug110mm dia |
| 76 | Pipe Clip 110mm dia |
| 77 | W.C. Connector (Bend) with ring110mm dia |
| 78 | Single Tee with Door75mm dia |
| 79 | 110mm dia |
| 80 | Gully Trap 110mm dia |
| 81 | Nahni Trap with Jali 4” 110mm dia |
| 82 | Vent Cowel 110mm dia |
| 83 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia |
| 84 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Coupler (socket)110mm dia |
| 85 | Bend 45110mm dia |
| 86 | Bend 87 .5110mm dia |
| 87 | Pipe Clip110mm dia |
| 88 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license Nos), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 (-do-) |
| 89 | Hoisting Charges for each floor :For items 2.26.5 to 2.26.8 |
| 90 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having theRmal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)15 mm Nosminal size |
| 91 | 25 mm Nosminal size |
| 92 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having theRmal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work).15 mm Nosminal size |
| 93 | 20mm Nosminal size |
| 94 | 25 mm Nosminal size |
| 95 | 50 mm Nosminal size |
| 96 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :15mm dia Nosminal bore |
| 97 | 20mm dia Nosminal bore |
| 98 | 25mm dia Nosminal bore |
| 99 | 50mm dia Nosminal bore |
| 100 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :(-do-) 25mm Nosminal bore. |
| 101 | (-do-) 50mm Nosminal bore. |
| 102 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two Nos. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 Rm:- Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. |
| 103 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 Rm:Size 300 Cm. dia outside & 300 Cm. depth . |
| 104 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 RmInside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. |
| 105 | -do- size 450 x 450mm depth upto 0.5 M Cement cover with frame |
| 106 | Supply of different sized earthen pots at site/store including loading unloading & transportation etc.complete Earthen pot 300 mm size |
| 107 | Earthen pot 350 mm size |
| 108 | Supply of different varities of tree/shrubs/climbers according to height and age of the plant at side including loading/unloading & transportation etc.completeDifferent flowering plants 900mm to1500mm |
| 109 | Different varieties of shrubs 600mm to 900 mm |
| 110 | Different varieties of climbers 900mm to 1500 mm |
| 111 | Spreading of manure , good earth in required thickness (cost of manure and good earth to be separately ) |
| 112 | Supply & Planting of shady plants ( Neem. Peepal, Goolar, Jamun, Imli or other specified) along road side including the following activities:- |
| 113 | Supply & Panting of ornamental plants ( Kachnar, Amaltas, Gulmohar, Arjun, Kala, Siris, Jacranda etc. or other specified) along road side including the following activities :- |
| 114 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm Nosminal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm Nosminal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth teRminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, PheNoslic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical paraRms of product / work refer Annexure 'A' attached with this BSRShort point (up to 3 Rm) |
| 115 | Medium point (up to 6 Rm) |
| 116 | Long point (up to 10 Rm) |
| 117 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm Nosminal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm Nosminal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth teRminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, PheNoslic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical paraRms of product / work refer Annexure 'A' attached with this BSROn board |
| 118 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR25 mm |
| 119 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR2 x 2.5 sq. mm. + 1x1.5Sqmm |
| 120 | Supplying and drawing coaxial cable 75 ohm impedance with foam PE insulated solid bare copper inner conductor, and Ist outer conductor of bonded alum. tape and second outer conductor of alum. alloy braid in existing surface or recessed conduit/casing capping including making connections as required. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR RG - 6 2 pair |
| 121 | Supply and Laying of PE Insulated jelly filled ARmoured Telephone Cable. with 0.6 mm thick Solid Annealed Bare Copper Conductor and confiRming to TEC specifications confiRming. to DOT GR/CUG-01/Aug.2003 in existing pipe / open trench / Cable tray / on surface including making necessary connection, testing etc. as required of size. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR ARmoured 20 pair |
| 122 | P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR |
| 123 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan ConfoRming to all the perfoRmance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 Sqmm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR . 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) |
| 124 | Providing & Fixing of of BLDC TechNoslogy ventilating fans , single phase with PVC impeller, ABS body, Double Ball bearing, automatic back lower shutter including making connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR . 250 mm sweep with Min. Air delivery 1150 cmh, 1300 RPM |
| 125 | Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan confoRming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR . 450 mm sweep(900/1400 RPM) |
| 126 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / confoRming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase teRmination capacity of 35Sqmm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating |
| 127 | Double pole MCB(With B/C curve tripping Characteristics) 6 A to 32 A rating |
| 128 | Four pole MCB (With B/C curve tripping Characteristics) Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) confoRming to (IS:12640-1)/ IEC 61008 -1 , rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock, min. operation 10,000 upto 63 A rating and 5000 for 100 A rating and minimum phase teRmination capacity of 35 Sqmm. rigid wire , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR Two pole 30 mA sensitivity40 A rating |
| 129 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet Nost less then 1.2 mm thick confoRming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB teRminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR Glazed door (single phase) IK-09 and IP-43 with Metal end box 8 Way (8+2) |
| 130 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing teRminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR |
| 131 | Providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass teRminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR 25 Amp. 2 Module Socket |
| 132 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L Nos. printed made out of unbreakable and fire retardant vergin poly carbonate with brass teRminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR 5 step fan regulator 2 Module 360 dgree rotating |
| 133 | Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 Rm below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measuRment book.All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 134 | Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR . 25mm x 6mm G.I. ( Hot Dipped ) Strip |
| 135 | Supply & Laying following size' B ' class , Medium class G.I. Pipe confiRming to IS : 1239 P - 1 ( 2004 ) with accessories like bend, socket etc. for laying earth conductor/ strip / cable in ground/ surface/ recess as required. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR . 40 mm dia. |
| 136 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should Nost more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR .1170mm(+/-10%) LED batten with min. lumen output 2200 lm |
| 137 | SITC of IP-42 and general construction confiRming to IS:8623 : 1993, wall/ free standing floor mounted dust and veRmin proof compartmentalised cubical panel as specifications and Other paraRms required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:- |
| 138 | Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulator with standard short circuit withstand capacity , high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR Electrolytic grade Aluminium bus bar 6010 grade. |
| 139 | Providing & Fixing of IS: 13875 & IEC :61326 confiRming LED Digital type (up to 500) V range Volt Rm / Direct- AmRm / CT oertated amRm/ Frequency Rm / KWH Rm / Multi Function Rm / Power analyzer of class 1 accuracy as per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR .Three phase AMP+HZ+PF+KW+KVA+KVAR+T.ENERGY+THD-I, THD-V & RUN HRS |
| 140 | Providing & Fixing of BIS approved Current TransfoRmer as per PWD specification for electrical Works ,ISI marked as per IS 2705-1992/ confoRming to IEC 60044-1, with secondary teRminal of CT shall be brought out suitable to a teRminal block which shall be easier accessible for testing and teRminal connection , with all necessary support in existing panel including connection etc. as required Current transfoRmer Ring Type Tape Wound/Resin Cast Wound as per IS 16227 with, Accuracy Cl, CT ratio and burden as specified. ISF<=5, Cu cross section of secondary wire 1.5Sqmm (minimum), including all necessary support in existing panel including connection etc. as required . All as per pre approved by Engineer in charge.All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR .Ring type tape wound CT C T Class 1, Ratio 200/5 to 300/5, Burden 10 VA |
| 141 | C T Class 1, Ratio 400/5 to 1200/5, Burden 15 VA |
| 142 | Providing & Fixing of 110/220 V, unibody LED Indicating lamp IEC 60947 with integral circuit, IP 65 above panel & IP 20 teRminal block, Approx. body dia for panel Nost less then 20 mm, length min. 50mm, front LED cover dia min. 29 mm, contact material phospher bronze for Led, PCB contacts shall be of brass (tin plated), impulse dielectric tested for 2.5 KV, Rated insulation resistance shall be 100 M ohm at 500VDC including connection etc. as required. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR .Red/yellow/Green colour |
| 143 | Blue / white Colour |
| 144 | SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , confoRming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical perfoRmance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR4 pole MCCB With TheRmal Magnetic releaseup to 100 Amp , 10 kA, fixed O/L & fixed S/C setting |
| 145 | 250 Amp , 25 kA, adjustable O/L & adjustable S/C setting, |
| 146 | 400 Amp , 35 kA, adjustable O/L & adjustable S/C setting, |
| 147 | Supply and fixing of following accessories for Moulded case circuit breaker (MCCB) compatible to main MCCB OEM as per PWD specification for electrical Works, confoRming to IS/IEC 60947 P - 2 :2003 including making connection etc complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical paraRms of products/ work , refer Annexure \\"A\\" attached with this BSR .Shunt Trip Release |
| 148 | Under Voltage Release |
| 149 | Extended Rotary Handle |
| 150 | Auxiliary contact |
| 151 | Spreaders for 250A, 4 Pole MCCB |
| 152 | Spreaders for 400A, 4Pole MCCB |
| 153 | Supply and erection of Decorative Pole Mild Steel with a total height of 9mtr above ground level with double arm bracket of street light 200W each side and predefined pattern in between the top portion of the pole. Pole bottom base section shall be 400x200x1500mm, 4mm thickness column with two side predesigned laser cut to illuminate the surroundings in 20W with noticeable mode, next section embedded with double pole of 76x7000x3mm with golden casting embellishment with illuminated laser cut pattern design of bracket of 3000mm long to hold the street light. The base plate of pole shall be of size 600x350x12mm. The Approximate weight of the pole is 200kg (+-5%). Provision for inside termination box with 4way connector & 2nos 6 Amp MCB for local isolation. The pole and light fixture is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized powder coat and cured. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all accessories and foundation bolts of 20 mm dia & 750mm length and Providing and Laying RCC Foundation work with TMT bars as per instruction of engineer incharge with Excavation of Pit n cement concrete of M-20 grade of foundation sizing as per 800mm x 550mm x 1750mm (Inground 1500mm & above Ground 250mm), 2 no. Required Size PLB HDPE Pipe and Nosing Angle 40 mm x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face. The Neon flex strip is composed with Led in series jacketed by an inner plastic extrusion with IP 67 encapsulation in a 14mm tube. It is used to illuminate the overall laser cut pattern on pole of approximate size of 18mtr with 6W per mtr, color temperature 3000K, 12VDC driver. Led strip to be mounted with the help of clips..( as per attached drawing and Engineer Incharge ) |
| 154 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArRmoured Aluminium cable confiRming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confiRming to IS 8130 of purity >99.6 %, round / flat strip aRmouring of cables, Inner / outer sheath confiRming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical paraRms of product / work refer Annexure 'A' attached with this BSR16.0 Sq. mm 4 core |
| 155 | Supply installationtesting&Commissioningof highmast lighting system(asperPLG07 of ILPUK techinicalreportNos7ofILEUK/IS:875Part-1–2015//BSEN10025/andIS:2062)consistingoftotallyhot dipgalvanisedbypiecewisesingledippedmethodhighmast, lanterncarriagesuitableforupto12Nos luminarieswithweldedaRm(excludingluminares),mastheadframeassemblywithfullcover, including1 Nos.LED15WattsaviatioNosbstruction lights,doubledrumtypeselfsustainingwinch,integralpowertool accesible fromdoor with padlocking arrangement (winchmotor with control circuit) hot dipped galvanisedheavydutypipe lightening finial, Stainless steel 6mmdia.wire ropes (AISI 316, 7 /19 costruction3Nos. ropefor lanterncarrage&2Nos. ropeforwinchassembly) foundationbolt, torque limiter,EPR insulatedPCPsheathed5corex2.5SqmRmailingcable, includingoutdoor typecontrol panelforautoon/off,reverse/forwardmotoroperation.Themastisconstructedfrommildsteelplates (asperIS5986Gr.510)cutandfoldedtofoRmapolygonalsection,telescopicjointedandweldingasper BS5135.etc.asrequiredonExistingFoundation. ( SeetableP-03forspecs.)OEMMusthaveTypetest certificateforwindtunneltest. AllasperpreapprovedbyEngineerincharge.Allasperpreapprovedby Engineer in charge. For additional technical paraRms of products/work , refer Annexure \\"A\\" attached with this BSR .12.5RmHM(in2section) suitablefor6Nos.Luminaries 2Nos.ropeforlanterncarrage&2Nos.ropefor winch assembly |
| 156 | Providing&Fixingof IK08, IP66protectedLEDStreetLightLuminaireonexistingbracket/pole.Fixture madeofpowdercoatedsinglepiecepressurediecastaluminummaterialwithheatdissipationfinson housingwithUVstabilizedPC(UVstablizationreportsubmittedforUVcover)/ToughenedGlasscover andsecondarylensonEachLED&shouldbeSMDtypeof3to5wattEach.TheSystemefficacy>=125 lm/wt andpotteddriver&hasauniqueBISRnumberwith InputVoltageAC120to270VACwithHigh voltageCutoff@>=300VACandAutoresettingSafety , PowerFactor>0.95driver Efficiency>85% ,THD(I)70andCCT5700K+355K.Surgeprotectionshallbemin≥4 KV internal andmin10KVexternal insidedriver compartment. driver shouldbePhase tophase protectioNosf440Vfor4Hrs.ManufacturesWordMark/NameEngraved/Embossingondiecasthousing toallowtraceability/authenticity.FixtureshallbeASPERIS10322Complianced.OEMMusthaveitsown inhouseNABLlabsetupforalltestingfacilitiesfor LEDfixtures. (LM79/LM80)Certificate/reportwith liablewarrantyofproduct/accessoriesfromOEMshallbesubmitted.AllasperpreapprovedbyEngineer incharge. F Please Enable Macros to View BoQ information |
| 157 | Supplying & fixing as per Sample / Drawing ornamental Machine cut white jodhpur sand stone ashler benches having stands & seat, as per following specification :(a) One pair stand which thicknees up to 90mm , Height up to 41 cm & Width having as per under :- (i) At top & Bottom width are up to 41 cm (ii) At Center width are up to 27 cm (iii) Both end of the seat are round in shape (b) All side moulde seat up to 50 mm thick & size up to 1.65 m x 0.45 m ( tolrence variation in length are up to 5 cm) (with engraving UIT Logo) |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
