|
| 1 | Schedule 'A' Part-I (BUILDING WORK) |
| 2 | Construction of Block of Alternator Bay Building (Single Storey) including all fittings & fixtures, motor foundation etc. (excluding internal electrification) complete all as shown in drawings and as specified. |
| 3 | Schedule 'A' Part-II (EXCAVATION AND EARTH WORK) |
| 4 | Lump sum price worked out by contractor for \\"EXCAVATION AND EARTH WORK\\" as listed in Schedule 'A' Part-II. |
| 5 | Schedule 'A' Part- III (INTERNAL ELECTRIFICATION) |
| 6 | Lump sum price worked out by contractor for \\"INTERNAL ELECTRIFICATION\\" as listed in Schedule 'A' Part- III. |
| 7 | Schedule 'A' Part- IV (HARD STANDING) |
| 8 | Lump sum price worked out by contractor for \\"HARD STANDING\\" as listed in Schedule 'A' Part- IV. |
| 9 | Schedule 'A' Part -V (FOR AREA DRAINAGE) |
| 10 | Lump sum price worked out by contractor for \\"FOR AREA DRAINAGE\\" as listed in Schedule 'A' Part- V. |
| 11 | Schedule 'A' Part -VI (AIR CONDITIONING WORK) |
| 12 | Lump sum price worked out by contractor for \\"AIR CONDITIONING WORK\\" as listed in Schedule 'A' Part- VI. |
| 13 | Schedule 'A' Part -VII (EXTERNAL ELECTRIC SUPPLY) |
| 14 | Lump sum price worked out by contractor for \\"EXTERNAL ELECTRIC SUPPLY\\" as listed in Schedule 'A' Part- VII. |
| 15 | Schedule 'A' Part -VIII (EARTHING) |
| 16 | Lump sum price worked out by contractor for \\"EARTHING\\" as listed in Schedule 'A' Part- VIII. |
| 17 | Schedule 'A' Part -IX (LIGHTNING PROTECTION WORK) |
| 18 | Lump sum price worked out by contractor for \\"LIGHTNING PROTECTION WORK\\" as listed in Schedule 'A' Part- IX. |
| 19 | Schedule 'A' Part -X (MISCELLANEOUS ITEMS) |
| 20 | Supply and fix LED Unilite 2x20W 4' suitable for surface/Hanging, LED industrial powder coated MS box with twin LED tube delivers high brightness & excellent illumination even in high ceiling areas with CRCA White powder coated provided for frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a inbuilt electronic constant current driver with no UV & IR radiation complete with high brightness SMD, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge. |
| 21 | Supply and fix street light bracket 40mm bore GI pipe/tubing light grade 1.5 Mtr long bend to shape with MS flat iron 50 x 5 mm for clamps nuts, bolts and washers etc and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | Supply and fixing of sheet metal enclosure distribution board 415volt,Vertical TPN 4 Way with provision for suitable MCCB FP up to 160 A as incomer & MCBs SP/TP as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-43 protection, , including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etc complete all as specified as directed by Engr-in-Charge. (for bldg) |
| 23 | PUMPSET : Supply, Installation & commissioning centrifugal monoblock pumpset suitable capacity for condensing unit for Air cooled chiller unit 11 TR @ standard flow rate to maintain desired temp all as per item no 1 of schedule A part VI , factory assembled & tested for rated efficiency complete with motor & common base frame, coupling guard etc.for re-circulation of chilled water from condenser to heat exchanger for the cooling of heat exchanger . The pumps shall be suitable for operation on 220 ±10%Volts, 50Hz, AC power supply all as specified and directed by Engineer-in-charge. The pump characteristic of centrifugal pump set shall be as follows:(a). Minmum Water flow rate - 60-70 (approx) LPM (b). Static Head - Min 10 Mtr. |
| 24 | Supply and fixing of digital temp & humidity display system showing ambient temp, room temp and RH and necessary control wiring and sensor include Thermostat complete all as specified and directed by Engineer-in-charge |
| 25 | Supply and fixing of FRLS copper cable of size 6 sqmm 3 core superior quality, laying over GI slotted cable tray including necessary supports and frame work complete all as specified and directed by Engineer-in-charge |
| 26 | Supply and fixing of stainless steel slotted cable tray 50 mm high in 16 SWG. 150 mm width including necessary supports and frame work complete all as specified and as directed by Engineer-in-charge. |
| 27 | Supply and fixing of Butterfly valves Cast Iron body, Wafer type integrally moulded close end body construction with Hand liver operated of size 20 mm bore complete all as specified and directed |
| 28 | Supply, installation, testing and commissioning of cast iron 'Y' strainer in chilled water & condenser water plumbing and adequately supported as per specifications of size 20 mm. |
| 29 | Supply and fixing water flow switches complete all as specified and as directed by Engineer-in-charge. |
| 30 | Supply and fixing of Bimetal Dial type temperature Gauge of suitable range with adjustable stem complete all as specified and as directed. |
| 31 | Supply, install, testing and commissioning of PVC Expansion water tank for chilled water make up water 200 ltrs. The Tank duly insulated with 30 mm thick fire retarding quality expanded polysterene of density 20 Kg/Cum and finished with sand cement plaster over chicken wire mesh and painted with 2 coats of primer and 2 coats of synthetic enamel paint of approved shade including suitable float valve. Note: Quoted unit rate shall be included cost of makeup tank, foundation if needed, thermal insulations, over flow valve, float valve and outlet GI pipe complete.GI pipe required for making inlet connection of tank shall be measured and paid separately under respective item. |
| 32 | M&L for HDPE Double Wall Corrugated pipe of size 63 mm outer dia and 50 mm inner dia confirming to IS:14930 Part-II including necessary pipe fittings such as couplers, end caps, bend etc. including fixed to wall/roof /pole/trench as required with suitable clamps for cable protection complete all as specified and directed. |
| 33 | Supplying and laying of size 90 mm dia (OD-90 mm & ID-75 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (60 cm below ground level) for cable protection , the cable fix in pipe proper as per direction of eng-in -charge complete as required. |
| 34 | Supplying and laying of size 110 mm dia (OD-110 mm & ID-95 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (60 cm below ground level) for cable protection , the cable fix in pipe proper as per direction of eng-in -charge complete as required. |
| 35 | Supply and fix Heat shrink End joint indoor/outdoor LT 1100 volts grade 185-240 sqmm, 4 core complete all as specified by Engr-in-Charge. |
| 36 | Supply, installation & commissioning outdoor type RMU 4 way (01 VCB + 03 LBS) consisting of HT 11 KV, 3 phase, 50 cycles, totally enclosed metal clad SF6 Switchgear having Rupturing capacity upto 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 400 Amp and Installation of 11 KV, 03 Nos 630 Amp Load break switch with 200 Amp DO set and earth switch with provision of Bus coupler of suitable rating connected with the VCBs and LBS with provision switching on and off the sources ,the RMU VCB required auto spring charging and manualy charging facility ,for relay backup single phase supply also provision from nearset sources for including Platform /foundation of Suitable size as per manufacturer recommendation with Cable entry /out openings , embedded earthing lugs ,disposal of surplus soil ,curing and finishing and plaster of 15mm in CM 1:4 with two coat synthetic enamel painting on complete plinth as directed by Engr-In-Charge. |
| 37 | Supply, installation, commissioning and testing of factory made (CPRI approved) LT Panel outdoor type of suitable size, made ot of 3.15 mm thick CRCA sheet duly compartmentalized inside panel with 2 mm thick CRCA sheet for fixing of MCCB & instumentations compartments and frame etc. to accommodate the incoming and outgoing MCCBs/ COs / Motor Starter duly powder coated (The inner/outdoor shell. will have powder coated siemens grey) and having provision for front and rear side opening with rubber beading and mild steel cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, The panel shall be placed on angle iron of size 50 x 50 x 6 mm frame supported on 04 legs 600 mm long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 angle frame shall be provided with mild steel sheet 300 mm width and 1.6 mm thick on three sides duly fixed with nuts and bolts complete all as specified and directed. Panel shall comprise of the following:- (a) Aluminium bus bar mounted on insulators duly painted colour code 600 Amps - 3 Nos for phase and 400 Amps - 01 No for neutral. (b) Incoming MCCB 4 pole, 400 Amps, rupturing capacity 50 KA,415 Volts AC, adjustable thermal and megnatic setting-01 No.(c) Out going MCCB's TP 320 Amps repturing capacity 50 KA - 01 No's (d) Out going MCCB's TP 100 Amps repturing capacity 25 KA - 01 No's(e) MCB TPN 40 to 63 amp (for spare)(e) Multifunction Meter Digital type showing V,A,F,Pf Kw,KWH in built Selector switch with CT coiles for three phase.(hf) Indicator lamp neon type (RYB) with holder,one set for each incoming and out going - 01 Sets(j) Complete internal wiring with suitable sizes copper conductor PVC insulated all as per manufacturor design (k) Danger Notice plate 440V with conventional skull and bones in red signal colour. |
| 38 | &P and labour for shifting of transformer up to 400 KVA with in Airforce stn including disconnecting, reconnecting HT & LT connection & testing, refixing of transformer on new foundation with in and including M&L for Platform of size 2.5 Mtr x 2.0 Mtr x 1.5 Mtr high (outer diameter) built with 150 mm thick PCC 1:4:8 D2 foundation extending 150 mm on both sides of wall, wall 300 mm thick of Bricks masonery in sub-class \\"B\\" brought to course built in cm 1:6 ,Internal filling with sand/stone dust ,top concrete slab in 100mm thick PCC 1:2:4 type B1 laid in bays over 100 mm thick hard core over approved earth filling as ,Cable entry opennings, embeded earthing lugs, disposal of surplus soil ,curing and finishing and plaster of 15mm in CM 1:4 with two coat synthtic enamel painting on complete plinth as directed by Engr-In-Charge. |
| 39 | M&L for chemical earthing using outer & inner pipe of copper as earthing electrodes and hydroscopic jelly back fill for good conductivity complete all as directed (Dia of outer pipe shall be 65 mm, dia of inner pipe shall be 40 mm, length shall be 3 Mtrs, thickness of both pipes shall be 2.1 mm and made of minimum 95% copper metal) including copper earth strip of size 32x6 mm and 40mm GI pipe upto 7.5 Mtr with copper testing point complete with PCC earth pit and 50 mm thick RCC pit cover using 20 mm graded stone aggregate with MS TMT reinforcement bar 8 mm dia @ 150 mm center to center both ways, MS handle 10 mm dia made to shape with 50 x 50 x 6 mm angle iron frame duly painted, earth work in any type of siol connected to earthing test point and testing complete all as specified and as directed. |
| 40 | S&F new portable fire fithting extinguisher cylinder with dry powder mono ammonium phosphate (DCP type) 4 Mtr for 5 Kg jet length ISI Marked with hydraulic test pressure of 30 Kg f/Cm square with ABC test complete all as specified and as directed, |
| 41 | S&F new portable fire fithting extinguisher cylinder with carbon dia Oxide (CO2) 4 Mtr for 5 Kg jet length ISI Marked with hydraulic test pressure of 30 Kg f/cm2 with ABC test complete all as specified and as directed. |
| 42 | M&L for Fire HUT made of angle iron(40x40x6mm) , MS sheet 5mm think with safety eqipment of iron bucts of 04 nos for water and sand buckts 04 nos and space for sand laying in bottom / bw of iron pillers and both side clamp for fixing of fire exinguisher with preparation of painted surfaces of any discription, one coat of priming with red oxide zinc chrome lead & two coat of sythic enamel paint Post office Red colour on steel/iron surface complete all as specified and as directed |
| 43 | M&L for GI tubing 40 mm bore light grade ISI marked 1.5 mtr long fixed vertically on roof top duly embedded in PCC 1:2:4 type B-1 block of size 30cm x 30cm x 30 cm complete all as specified and as directed. Please Enable Macros to View BoQ information |
