|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil |
| 2 | Providing Laying In Position Cement Concrete Of specified Grade Excluding Cast Of Centering And Shuttering – All work up to plinth level 1:5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size). |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for walls (any thickness) including Stairs, (excluding landings) except spiral-stair cases. |
| 5 | Steel reinforcement for R.C.C. work including straightening, cuting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium tensile steel bars. |
| 6 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 7 | Bricks work with F.B.S. of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in DSR item |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size 600x600. |
| 10 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade (Width of the door should be 1000mm clear space for wheel chair entry) AC 15) |
| 11 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on both sides |
| 12 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gaskit etc. complete as per the architecture drawings and directions of engineer in charge (cost of aluminium shall be paid in basic item0 with toughened glass pones of 6mm thickness. |
| 13 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 21.8.1 Upto 5mm depth and 5 mm width |
| 14 | Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mmc/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: |
| 15 | Wall painting with acrylic emission paint of approved brand and manufacturer to give an even shade : Two or more coats on new work |
| 16 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 17 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : Flush / Ruled/ Struck or weathered pointing. |
| 18 | Providing & fixing tile facing with(0-9''x0-3'') tiles laid in cement sand mortar 1:4 in first storey upto 4 Mtr. Above plinth level complete in all respects. |
| 19 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase |
| 20 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketted pipes.110 mm diameter |
| 22 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Bend 87.5° 110 mm bend |
| 23 | 12 mm thick cement plaster 1:4. |
| 24 | 12 mm thick cement plaster 1:6. |
| 25 | Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil varnish and chalk Mitti finishing the surface to the entire satisfaction of EIC |
| 26 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (DSR No. 16.90). |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. |
| 28 | Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work. |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete i/c cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 30 | Extra for P/F in position best Indian make (to the approval of the EIC) 1.25” i/d CP Flush valve (Jaquar), cp jet complete in all respects in place of low level cistern, flush pipe as mentioned in DSR 17.2.1 |
| 31 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893115 mm nominal bore. |
| 33 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
| 34 | Providing and fixing soil, waste and vent pipes :100 mm dia Sand cast iron S & S pipe as per IS: 1729 |
| 35 | 75 mm dia Sand cast iron S & S pipe as per IS: 1729 100 mm . Sand cast iron S & S pipe as per IS: 1729 |
| 36 | Providing and fixing plain bend of required degree: |
| 37 | Providing and fixing collar :100 mm Sand cast iron S & S pipe as per IS: 1729 |
| 38 | 75 mm Sand cast iron S & S pipe as per IS: 1729 |
| 39 | cowl 100 mm Sand cast iron S & S pipe as per IS: 1729 |
| 40 | Providing and fixing drip seal joint including the cost of yarn for 100mm HCI pipes complete in all respects |
| 41 | Providing and fixing drip seal joint including the cost of yarn for 75mm hci pipes complete in all respects |
| 42 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729. |
| 43 | Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :100 x 100 mm size P type With F.P.S. Bricks class designation 75 |
| 44 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia. |
| 45 | P/F G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall.15 mm dia. nominal bore |
| 46 | 25 mm dia. nominal bore |
| 47 | 32 mm dia. nominal bore |
| 48 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
| 49 | Cutting holes up to 30x30 cm in walls including making good the same: With F.P.S. Bricks |
| 50 | Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. |
| 51 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :25 mm nominal bore. |
| 52 | 32 mm nominal bore. |
| 53 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x 610 mm and 45 cm deep for single pipe line With F.P.S bricks. |
| 54 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With F.P.S bricks |
| 55 | Extra for depth beyond 45 cm of brick masonry chamber :For 455x610 mm size With F.P.S. Bricks |
| 56 | For 600x850 mm size With F.P.S. Bricks |
| 57 | Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter |
| 58 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 150 mm diameter S.W. Pipe |
| 59 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 60 | Providing and fixing toilet paper holder :C.P. Brass |
| 61 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 62 | Providing & fixing of liquid soap dispensers in washbasin area as per direction of EIC. |
| 63 | Providing and fixing of stainless steel handicap grab bar including fixing nut-bolts , fasteners as per site requirements at green belt toilet blocks complete in all respects to the entire satisfaction of EIC. |
| 64 | Providing and fixing of Sanitary napkin Vending machines with top up pads complete in all respects to the entire satisfaction of EIC. |
| 65 | Providing and fixing of laminated Sign board of different sizes of aluminum base showing matter relates to Swachh Survekshan , Swachh toilet, SBM & warning against cleaning septic tank etc.Size 36\\"x24\\" |
| 66 | Size 12\\"x8\\" |
| 67 | Size 11\\"x10\\" |
| 68 | Extra for providing & fixing Mini Sensortronic concealed type flushing valve for urinal complete with installation box (jaquar) make, DC operated, CP connection complete in place of 10 ltr. Capacity automatic flushing cistern as per item DSR 17.4.3 sensor |
| 69 | P/F in position best Indian make (to the approval of the EIC) 15MM c.p. Brass extension nipple including the cost of cp flange complete in all respects. |
| 70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support |
| 71 | P/F in position best Indian make (to the approval of the E.I.C.) Gunmetal ISI peat valve complete in all respects:- (a) Peat valve 1¼”. |
| 72 | c) Peat valve 1”. |
| 73 | Making water connection ½” size inc. the cot of ferrule gunmetal heavy duty ISI marked excavation, drilling, threading complete in all respects. |
| 74 | Point wiring in PVC conduit, with modular type switch wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthling the point with 1.5 sqm FR PVC insulated copper conductor single core cable etc as required.Group B a) wiring light point 1.5mm2 |
| 75 | (b)wiring 3 pin 5A Socket in 1.5mm2 cable |
| 76 | (c) wiring FAN point 1.5mm2 |
| 77 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, ‘C’ series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole |
| 78 | Double pole and neutral |
| 79 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 4 way |
| 80 | Prov. & Fixing exhaust fan 12\\" of reputed make s.a. CROMPTON/BAJAJ heavy duty complete as per satisfaction of E.I.C. |
| 81 | Prov. & Fixing tube light fitting 4' ,1x40watt mirtola type USHA/ Havells / PHILIPS make complete in all respects as per satisfaction of E.I.C. |
| 82 | Making suitable size wall niche including cement plastering from inside of niche for sheet metal, iron clad switch gear : |
| 83 | Grey Wall Mounted Baby Changing Station made from Durable and High Quality HDPE (High Density polyethylene) |
| 84 | Economy Shower Seat (Material: Polypropylene, Aluminum, & stainless Steel) Size 42x47x11cm) White- Makes : Prosafe, Pressalit or Equivelent |
| 85 | SS Dustbin, 6-10 litre capacity |
| 86 | Providing a S.S. 304, SWINGING GRAB BAR - 750 mm (U Type), and of Dia: 32mm, Brush/Matt finished, with safety locking machanism for preventing accidental falling down, and to be installed on the rear wall of the WC, at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge. Makes : Prosafe , Jaquar or Bobrick. |
| 87 | Providing a S.S. 304, GRAB BAR - 600 mm, and of Dia: 32mm, Brush/matt finished and to be installed on the rear wall, at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge. Makes : Prosafe , Jaquar or Bobrick. |
| 88 | Providing a S.S. 304,Horizontal Vertical, HV GRAB BAR - 600X600mm, L-TYPE and of Dia: 32mm, Brush/matt finished and to be installed on the rear wall of the WC, at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge. Makes : Prosafe , Jaquar or Bobrick. |
| 89 | Providing of S.S. 304 GRAB BAR - 900 mm and of DIA: 32MM, Brush/matt finished and to be installed on the rear wall, at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge. Make: Prosafe , Jaquar or Bobrick. |
| 90 | Providing of S.S. 304 LONG GRAB BAR - 1500mm with extra centre support for additional safety & load bearing capacity, DIA: 32mm, Brush/matt finished and to be installed on the rear wall, at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge. Makes :Prosafe , Jaquar or Bobrick. |
| 91 | Wall Mounted, manually height adjustable Wash Basin Attachment System (with vertical track) Height adj : 200-240mm. Make: Pressalit, Profilo Smart, or Prosafe. |
| 92 | Flexible feed & waste system - 700mm waste pipe, Make: Prosafe, Pressalit, or Profilo Smart. |
| 93 | Providing of PH Toilet Emergency Calling Pull cord and One w/m unit of blinking light with audio siren, (Wireless Range: approx 10-15 mtr wireless system), at the specified location as per accessibility standards and and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge, One set to be installed in each PH Toilet. Make: Prosafe or Equivalant. |
| 94 | Removable Toilet seat Raiser with Lid and White , 100mm height raiser.Make: Prosafe, Kdesign, or Pressalit |
| 95 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 96 | Providing of TGSI Directional Tiles Stripes for Blind persons walk ways : Diamond design, Size 280x35x4.5mm - Stainless Steel (Grade-304 or 316), made from SS 304/316 virgin sheets (Note: not casted steel type as it fails in testing 304 grade as made from scape steel not confirming to 304 0r 316 grade steel), with 3 stems on back side, at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge. Make: Prosafe or Equvalent. |
| 97 | Providing a TGSI Warning Tiles studs for blind persons walk ways -Ring/ Diamond design, Size: 35x4.5mm Stainless Steel(Grade - 304 or 316), with single stem, made from SS 304 sheet (Note: not casted steel type as it fails in testing 304 grade as made from scape steel not confirming to 304 0r 316 grade steel), at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge.Make: Prosafe or Equivalent. |
| 98 | Tactile & Dual language, Braille Door Signages, Directional Braille Signages (Sizes between 225mmx150mm till 600mmx600mm) : including Designing & Supply of Acrylic multilingual Braille Tactile signages - like Building entrance , Door signages, Name plates, (with Braille -raised domes) signboards of minimum size 9\\"X6\\" (225x150mm upto 600x600mm) to for doors, specific areas like toilets, water, etc. & directional signages (with or without maps or layouts/drawings) , designed as per the drawings issued and having 3+2mm thick blue(or any other colours or floroscent materials, suitable as per contrast of environment, as per ADA norms), in Acrylic non glare base plate, and additional plate at backside, with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri (or Gurmukhi-Punjabi fonts) non glare acrylic letters of height 15mm raised 0.8mm above base plate. Signage to have a relevant symbol made of white cut out acrylic and raised by 0.8mm above base plate. Grade II Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI to be integral with the sign face and be raised 0.6 to 0.9mm above base plate.Each signboard to be fixed as per manufacturers specifications at the specified locations at a height of 1200mm from FFL and up to the satisfaction of the engineer in charge. Make: Prosafe or equivalent. |
| 99 | Tactile & Dual language, Directional Braille Signages, Building Tactile Floor Directory, Evacualtion maps signage: Size from 24x18 Inches /600mmx450mm till max. 48x48 inches /1200mmX1200mm) Design, supply, fabrication and fixing Acrylic multilingual Braille for Layouts / Maps, Floor directories, Evacuation plans maps, etc(raised domes) signboards of size 24\\"x 18\\" or above for directions, designed as per the drawings issued and having 3+3mm thick Blue/or any colour as per contrast guidelines in ada norms, Acrylic non glare base plate (Floroscent or Green in case of Fire evacaution plans) with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri,, or Gurmukhi or local language non glare acrylic letters of height 15mm raised 0.8mm above base plate. Signage to have a relevant symbol made of white cut out acrylic and raised by 0.8mm above base plate. Grade 2 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI to be integral with the sign face and be raised 0.6 to 0.9mm above base plate.Each signboard to be fixed as per manufacturers specifications at the specified locations at a height of 1200mm from FFL and up to the satisfaction of the engineer in charge. Make: Prosafe or equivalent. |
| 100 | Night Glowing Green Braille embedded Tactile signs: Building Tactile Door signs, Directional signs, Floor Directory, Evacualtion maps signage: Size from 24x18 Inches /600mmx450mm till max. 48x48 inches /1200mmX1200mm) Design, supply, fabrication and fixing Acrylic multilingual Braille for Layouts / Maps, Floor directories, Evacuation plans maps, etc(raised domes) signboards of size 24\\"x 18\\" or above for directions, designed as per the drawings issued and having 3+3mm thick Blue Acrylic non glare base plate (Green in case of Fire evacaution plans) with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri /Gurmukhi or local language, non glare acrylic letters of height 15mm raised 0.8mm above base plate. Signage to have a relevant symbol made of white cut out acrylic and raised by 0.8mm above base plate. Grade 2 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI to be integral with the sign face and be raised 0.6 to 0.9mm above base plate.Each signboard to be fixed as per manufacturers specifications at the specified locations at a height of 1200mm from FFL and up to the satisfaction of the engineer in charge. Make: Prosafe or equivalent. |
| 101 | STAINLESS STEEL 304, BRAILLE STAIR LABELS : Design, Supply of steel tactile& Braille Labels - like for Railing, Grab rails, stairs cases railings (raised domes & direction arrows) minimum size 170MMX35MM to for FOR STAIRS RAILINGS , Grade II Braille consisting of raised domes of 1.5mm dia approx. and spacing as per Braille standards given by GOI to be integral with the sign face and be raised UPTO 0.6 mm above base plate. Make: Prosafe or equivalent. |
| 102 | Providing and fixing of drinking water facility (water cooler) including construction of Platform, connection with inlet and outlet services, fixing of IRC jali with structural frame etc. Complete in all respect as per satisfaction of EIC. |
| 103 | Civil Work Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR 10.28) |
| 104 | Providing and fixing coloured ceramic (Tactile) tile, ground surface indicators of size 300x 300mm of approved make for guiding/direction/warning to the visually impaired visitors, in the centre/side of the pedstrain/ approach pathway as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles as per design/ specification and guidelines complete in all respect to the entire satisfaction of Engineer-in charge. Note:- The tile shall be premium quality (1st quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JONHONSONS. |
| 105 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.(D.S.R-16.83) |
| 106 | Taking out existing cement concrete PCC tile from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the C&D Plant, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 107 | Earth work in excavation by Mechanical means ( Hydraulic excavator) manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, and excluding of disposed earth to be leveled and neatly dresses (DSR 2.6.1-2.36) |
| 108 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) DSR 4.1.10 |
| 109 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). as per direction of Engineer-in-charge. (DSR 15.2.1) |
| 110 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7.4) |
| 111 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) |
| 112 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (4.1.2) |
| 113 | Providing and fixing PCC kerbs of size 2’-0” x 9” having 4” thickness at bottom and 3” thickness at top and made of plain cement concrete 1:2:4 duly vibrated and compacted. The rates also includes the cost of filling and pointing of joints between kerbs with cement mortar 1:4 (1 cement 4 course sand) Complete in all respect to the entire satisfaction of Engineer In Charge. |
| 114 | Providing and fixing AC strips of 70mmx6mm fixed in cment concrete compltete in all respect as per satisfaction of Engineer In Charge |
| 115 | 15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) to the entire satisfaction of Engineer-in-Charge. (DSR 13.5.1) |
| 116 | Chipping or scraping and clearing upto 50mm depth and 40cm width of existing cement concrete/ paver/ tile pavement after cutting 10mm wide groove on two sides with average depth upto 50mm with blade & mechnical rotor in cement concrete/paver/tile pavement including arrangement of electricity generator for running of rotor machine, complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 117 | Centring and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls: Under 20 cm wide (DSR 5.9.16.1) |
| 118 | Providing and fixing acrylic Braille indicators for handrails of the approved design and make having Braille dots raised 0.5mm above base plate, to be installed at the specified locations as per the directions of the engineer in charge complete as per design/specifications and guidelines as per the entire satisfaction of the Engineer-in charge. |
| 119 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR 15.60) |
| 120 | Providing and Fixing acrylic multilingual Braile (raised dots)Door/ Directional Signboards of size 250 x 300mm designed as per accessibility standards and having, 3mm thick acrylic base plate with upper case san serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in 3 languages and having a non-glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height complete as per design/specifications and guidelines as per the entire satisfaction of the Engineer-in-charge. |
| 121 | Providing and fixing acrylic multilingual Braille (raised dots) DOOR/ DIRECTIONAL SIGNBOARDS of size 300 x 450mm designed as per accessibility standards and having, 3mm thick acrylic base plate with upper case san serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in 3 languagesand having a non-glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height complete as per design/specifications and guidelines as per the entire satisfaction of the Engineer-in-charge. |
| 122 | Providing & Fixing of Directional Sign Board of size 600 x 450mm made of 2.8mm Acrylic sheet with Tactile design of facilities including Braille and text in three languages. The complete signage shall be installed at site as the directions of Engineer-in-charge. (SINGLE SIDES) without Frame & Post. |
| 123 | Providing & Fixing of informatory Sign Board of size 900 x 600mm (Pedestal Type) made of 2.8mm Acrylic sheet with Tactile design of facilities including Braille and text in three languages. The acrylic sheet to be fixed on S.S. 304 grade frame made of 40 x 40mm steel pipe and with single leg post of 75mm Dia 16 guage pipe with pedestal stand with 1.5 Mtr. Height. The complete signage shall be installed at site as the directions of Engineer-in-charge. (without Frame & Post). |
| 124 | Dismantling wall tile work fixed in cement slurry including stacking material within 50 metres lead.for thickness of tiles 10mm to 25mm. |
| 125 | Providing and Fixing Morbi Tiles (thickness to be specified by the manufacture of approved make over 12mm thick bed of cement mortar 1:3)(1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3Kg per Sqm complete in all respect to the entire satisfaction of the Engineer-In-Charge. |
| 126 | 18mm Thick Rubbed Red Stone Flooring Over 20mm Thick Base Of Cement Mortar 1:5 (1 Cement :5 Fine Sand) With Joints 3mm Thick, Buttered With Cement Mortar 1:3 (1 Cement: 3 Stone Dust) Admixed With Same Mortar including molding of edges. |
| 127 | Renewal of top layer of jogging tracks for material after scrapping 1\\"-1 1/2\\" depth and filling 3\\" thick cinder and clay mix (top layer of cinder i.e. 80% and 20% of clay) on entire area and watering and compacted of new layer complete in all respect. This item shall be executed after completion of repair and refelling work at a time as decided by Engeneer in Chagre. Please Enable Macros to View BoQ information |
