|
| 1 | Dismantling and cement concrete removing including stacking the useful materials for reuse and removing the debris within 50m lead |
| 2 | Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per direction of the engineer in-chargeSump 1st depth |
| 3 | Sump 2nd depth |
| 4 | Sump 3rd depth |
| 5 | Supplying & Filling in foundatin and plinth with sand watered and rammed including cost conveyance, royalty & labour etc. |
| 6 | Cement concrete (1.4.8) with 4cm Size crusher broken hard Granite metal including cost of all labour, matenals with all taxes, lead,T & P etc all complete |
| 7 | Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes lead, T & P etc all complete |
| 8 | R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard 6 Granite chips hoisting & laying with cost of all labour, materials with all taxes, lead T & Petc all complete |
| 9 | Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and specification technical |
| 10 | Rigid smooth Centering R CC Foundation, Plinth Band Footings, Column Base, Mass Concrete & Precast Slabs (Ground Floor) |
| 11 | Rigid smooth Centering R.C.C Floor and Roof Slabs Landings, Balconies, Projecting. Sun Shades and Chajja up to 4.3m height (Ground Floor) |
| 12 | Rigid smooth Centering RCC Walls and Fins (Ground Floor) |
| 13 | 6 mm thick cement plaster (14) to R CC surfaces finished smooth including closed deep chiping and slury treatment |
| 14 | Dewatering with 2 nos 5HP pump (20 hour x 30 days) |
| 15 | Removal of excavated earth by 12 machanical means to an average lead of 5km. |
| 16 | Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per direction of the engineer in-charge |
| 17 | Supplying, fitting and fixing of G.I. Pipes, Angles as per approved design and specification with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. As per the |
| 18 | Earth work in all kinds of soil within 50m initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding depth & as per direction 0.3m in of the engineer-in-charge |
| 19 | Cutting asphalt bituminous road for taking the sewer line through and making good to the damages including cost of all labour. T & P etc. all complete as per the direction of engineer-in-charge |
| 20 | Supplying & laying Supplying HDPE pipe (300NB) PE 100 including cost of all 6 labour, T & P etc all complete as per the direction of engineer-in-charge |
| 21 | Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified premixed grading. with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision) |
| 22 | Cutting hole in R.CC floors and roofs upto 19 cm thick for passing G.I PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof. |
| 23 | Supplying, fitting and fixing of M.S. Channels Pipes, Angles as per approved design and specification with cost. conveyance, taxes of all materials, labour, T&P etc required for the complete in all respect As per the direction of EIC |
| 24 | Enamel Painting two coats over a coat of primer with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete in Ground Floor |
| 25 | Earth work in ordinary soil in exacavation of foundation trenches within 50 m. initial lead and 1.5 m.initial lift including all costs of labour materials required for the work efc complete and as per direction of Engineer-in-charge. |
| 26 | Brick work with Fly Ash Brick in cement mortar (1:6) in Foundation and Plinth having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. |
| 27 | Brick work with Fly Ash Brick in cement mortar (1:6) in super structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. |
| 28 | Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size CB chips including cost all materials.labours, T & P.curing etc complete (excluding the cost of reinforcement) and direction of Engineer-in-charge.Roof slab |
| 29 | Roof Beam |
| 30 | Column |
| 31 | Lintel & seal bend |
| 32 | Chajja |
| 33 | plinth beam |
| 34 | Footing |
| 35 | 16 mm thick cement Plaster (1:6) over Brick work including racking out joints mishing smooth with proper plumb and line watering curing for seven days. |
| 36 | 12 mm thick cement Plaster (1:6) over brick work including racking out joints finishing smooth with proper plumb and line watering curing,etc complete |
| 37 | Cement washing one coat including 2 scaffolding and cleaning the surface before application. |
| 38 | Finishing exterior wall with weather coat paint (Anti-fugal) of approved shade on new work of two coats over wall primer including cost of paint and labour 4.7 charges including scaffolding and cleaning the surface before application |
| 39 | Wall painting 2 coats with Distempering paint of approved shade over a coat of putty punning after a coat of primering including cost of all material, labour etc. |
| 40 | supplying, fitting and fixing vetrifed tile floors of size 600mm x 600mm of aproved make confirming to 15 13755 aid on 20 mm thick cement mortar 1:4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge.(For new work only) |
| 41 | Supply and fixing of G.I. grill Gate & window with Angle, Flat, Sheet etc all complete as per the direction of EIC |
| 42 | Painting two coats of enamel paint over a coat of priming complete as per the direction of EIC |
| 43 | 25mm thick grading Concrete in c.c (1:2:2) with 4.7mm bazuri over Brick/R.C.C work etc complete. |
| 44 | Removal of Excavated & Dismantalled Material by mechanical means. |
| 45 | Laying in trenches MS pipes of all Classes conforming to IS 3589-2001 & IS 36012006 of the following outside diameter including all fitting, fixing, materials, T&p & labour etc as per specification complete as per the direction of EIC273 mm outside dia. (6.3mm thick) |
| 46 | 610 mm outside dia. (6.3mm thick) |
| 47 | Supplying Installation, Testing and Commissioning of cast iron sluice valves of PN 1.6 rating flanged at both ends of following sizes complete with rubber insertion, nuts, bolts and washers etc. as required, including all fitting, fixing, materials, T&p & labour etc as per specification complete as per the direction of EIC |
| 48 | Supplying, Installation, Testing and Commissioning of NRV of PN 16 rating of following sizes with nitrile seat and stainless steel stem with lever/gear operation and cast iron body in powder coated finish complete in all respects as required including all fitting, fixing, materials, T&p & labour etc as per specification complete as per the direction of EIC250mm dia |
| 49 | Supply installation of one Ton Chain pulley block |
| 50 | Supply Installation of Bar Screen of 10mm spacing (1mtr X 6 3mtr) |
| 51 | CONTROL AND MEASSUREMENTSupply, installation, testing & commissiong of redundant pair of digital level transmitter measurement systems with remote indications. High high level and low low level alarms to be provided. |
| 52 | Supply, installation, testing & commissioning of 100 mm dia Burden type, Stainless Steel dial type pressure gauge including brass isolation valve and pipe having calibration of 0-16 Kg/cm2. |
| 53 | Supply, erection and commissioning of pole structure for terminating supply from SEB as per specifications and drawing The pole structure shall comprise of MSI beam/rail pole of 11 mtrs high (410 SP 24 as per latest IS 2713), in cement concrete foundation 1:3.6 (1 cement 3 coarse sand 6 graded aggregate 40mm nominal size) including excavation and refilling etc as required. The rate shall be inclusive of painting with 2 coats of aluminum paint (on red oxide) The portion of pole under the ground shall be provided with 2 coats of bituminous paint - 2 Nos. Steel sections, channels angles fiats, clamps, Gl nuts, bolts and required hardware etc of different sizes for cross arms, bracings, supports etc for pole GOD etc. including anticlimbing barbed wires (conforming to IS.278) having 4 points Supply, installation, testing and commissioning of 11 KV class disc/pin/support insulators complete with clamps and fixing hard wares etc. Earthing for Structure as per IS 3043 Metering Panel ACSR Conductor as requiredLT Receiving Point with 63 KVA Transformer |
| 54 | 100mtr Taping Distance (up to 100 meter only) |
| 55 | Supply and laying testing of the following 1100 volts grade PVC/XLPE insulated Copper conductor armoured / un-armoured cables.3.5c x 35 Sq mm PVC Cu. Ar. Cable |
| 56 | 4C x 2.5 Sq mm PVC Cu. Ar. Cable |
| 57 | 12C x 2 5 sq mm PVC Cu. Ar. Control Cable |
| 58 | Supply and fixing of cable end termination of the following PVC sheathed copper conductor armoured/un-armoured cables of 1100 volt grade, including cost of all crimping lugs and heavy duty compression glands, cable sockets insulation tape, sealing compound etc.4C x 35 Sq mm PVC Cu. Ar. Cable |
| 59 | 4C x 2.5 Sq.mm PVC Cu. Ar. Cable |
| 60 | 12c x 2.5 sq.mm PVC Cu. Ar. Control Cable |
| 61 | EARTHING FOR SUB STATION EQUIPMENTSupplying, fixing, testing and commissioning of following bare Copper.25 mm x 6 m thick Gl tape |
| 62 | Gl electrode earthing as per IS 3043 |
| 63 | Construction of Earth pit |
| 64 | Out Door Type Fabricating, Assembling Supplying transportation loading, unloading, shifting. Installation, Testing & Commissioning of 415V, 3 Phase, 50 Hz, 4 wire system, sheet steel clad, dust and vermin proof cubical and Indoor type floor mounted, free standing extendible type Main M.V. Panel compartmentalized design and fabricated out of 2 mm (for load bearing parts) / 1.6 mm (for non-load bearing parts) CRCA sheet steel complete with Copper Bus bars and ATS switch(Change over) |
| 65 | Supplying, Installation, commissioning of KIRLOSKAR 82.5 KVA 3 Phase DG set Liquid Cooled Engine of Model No 5 4R1190ETA 4G1 & coupled with KG-make Alternator of 3 Phase, 50Hz at 1500 RPM with Standard Panel, Acoustic Enclosure & Base frame. including transporting, all material, T&P labour etc all complete as per the direction of EIC (82.5KVA) Please Enable Macros to View BoQ information |
