|
| 1 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 2 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, poles, laying of pipes, laying of cable etc. or for shafts, wells, cesspits, manholes, pier holes etc, not exc 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in any type of soil, complete all as specified and directed. |
| 3 | Excavating over areas not exc 1.5 mtr deep and getting out in any type of soil, complete all as specified and directed. |
| 4 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed. |
| 5 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, aches, pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed. |
| 6 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 7 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed. |
| 8 | M&L for brick work with subclass 'B' old size burnt bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed. |
| 9 | Taking down cement plaster of any description on bricks, PCC block or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 10 | M&L for rendering 15mm thick on brick work or concrete surfaces in CM 1:4 and finished the surface even and smooth without using extra cement including necessary scaffolding or Jhula, complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick on brick work or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement including necessary scaffolding or Jhula, complete all as specified and directed. |
| 12 | M&L for rendering 10mm thick on brick work or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 13 | M&L for rolled mild steel section of angle, tee, flats and plates as in roof trusses, purlines, rails etc. and the like, fixed with angle cleats and connecting plates including welding, conforming to Fe-410-0 (Gde-E- 250) quality 'A', complete all as specified and directed. |
| 14 | Dismantling asbestos cement / CGI / PGI (corrugated or semi corrugated or plain etc) sheet in roof covering including ridges, complete all as per specified and directed. |
| 15 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 16 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed self tapping screws, complete all as specified and directed. |
| 17 | S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS:14862) of size 595mm x 595mm and any one of the design (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and 15x32mm made of 0.30mm sheet, and cross 'T' at 600mm c/c to form a grid including required cutting/ making, opening for services like diffusers, grills, light fittings, fixures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin etc. with gavanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all 'T' sections shall be centra black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/sqm and refixed all exesting electric wiring and fixture all complete at any heights as per direction of Engineer-in-Charge. |
| 18 | Supply only integral water proofing compound. |
| 19 | M&L for applying two coats of cement based paint on newly plastered wall surfaces over a coat of alkali resistance primer including preparation of surfaces, complete all as specified and directed. |
| 20 | M&L for preparation of new plastered surfaces of wall and applying two coats of white wash, complete all as specified and directed. |
| 21 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab, roof projection, drops and in shelves and the like, complete all as specified and directed. |
| 22 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in chajjas, complete all as specified and directed. |
| 23 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in beams, cantilevers, lintels coloums etc. over 1.50 mtr spam, complete all as specified and directed. |
| 24 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 25 | M&L for mild steel TMT bars 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 26 | M&L for mild steel TMT bars 6mm dia and over upto 8mm dia as stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 27 | Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 28 | Use and waste of formwork to roofs, chhajjas, trough and similar items including edges with rough finished flat surfaces of concrete, complete all as specified and directed. |
| 29 | Use and waste of formwork to sides and soffits of floor or roof beams, haunching, lintels, cantilever shelves including supported overhangs etc. with rough finished flat surfaces of concrete, complete all as specified and directed. |
| 30 | M&L for mild steel framed work such as grills, guard bars, railing, gratings, ornamental gates etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work, conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 31 | Dismantling of floor, hearth and wall tiling of any description or thickness as in floor, dados, apron etc, laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 32 | M&L for glazed ceremic coloured tiles as on vertical surface, size of each tile 300mm x 600mm x 7mm thick / 450mm x 350mm x 7mm / 350mm x 250mm x 7mm, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, fixed over and including 10mm thick plaster in cement mortar 1:4 including dismantling existing tiles including cement mortar bedding, complete all as specified and directed. Note :- Size of tile shall be decided by GE before incorporating in the work and no extra claim shall be entertained on this account. |
| 33 | M&L for non skid ceramic coloured tiles 7-8mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm, superior premium quality, grade B-1 as per IS in water splashing floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 34 | M&L for coloured vitrifired ceramic tiles 10mm thick (square/ rectangular), polished, light shade, area of each tiles exc 0.36 Sqm but not exc 0.42 Sqm (min size 1200mm x 600mm) as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 35 | M&L for coloured vitrifired ceramic tiles 10mm thick (square/ rectangular), polished, light shade, area of each tiles exc 0.36 Sqm but not exc 0.42 Sqm (min size 1200mm x 600mm) as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick plaster in CM 1:3, complete all as specified and directed. |
| 36 | M&L for granite stone work with 20mm thick slab, table rubbed and polished as in steps, window cills, cooking platforms and the like in single piece, set in neat cement slurry and pointing in white cement (1:2) with using marble dust and admixture of pigment to match with shade of granite, fixed laid over and including 15mm thick screed bed or bedding layer or plaster in cement mortar 1:4, complete all as specified and directed. |
| 37 | S&F aluminium power coated (colour) frame for door, window, ventilator, glazed with aluminium shutter (medium weight) of suitable size, one or more rebate, cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/ Xpm jalli and necessary fittings, screws, plugs for fixing screws etc, complete all as specified and directed. |
| 38 | S&F aluminium power coated (colour) section as in window, ventilator, glazed with aluminium shutter weighting 0.55 Kg/m including necessary fitting of suitable size, one or more rebate, cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/ Xpm jalli and necessary fittingd, screws, plugs for fixing screws etc, complete all as specified and directed. |
| 39 | S&F alluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300mm, complete all as specified and directed. |
| 40 | S&F 100mm stainless steel butt hinges, complete all as specified and directed. |
| 41 | S&F 100mm size butt hinges, medium weight cold rolled mild steel, complete all as specified and directed. |
| 42 | S&F 150mm length extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 43 | S&F 150mm length aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 44 | S&F 200mm length aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 45 | S&F 300mm size mild steel ordinary rat tail, rod pattern spring including roller plate, complete all as specified and directed. |
| 46 | S&F floor door stopper of alumium body and tongue anodised with hard drawn steel spring, overall length of cover plate 140mm, fixed with brass screws, complete all as specified and directed. |
| 47 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone or concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed. |
| 48 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 49 | S&F sheet glass 4mm thick ordinary quality and glazing with beading / oil putty in square not exc 0.50 Sqm each pane, complete all as specified and directed. |
| 50 | M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination with aluminium frame work, complete all as specified and directed. |
| 51 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection, laid in slope in 1:3 in pannels not exc 2 mtr long, finished the surface even and smooth without using extra cement including making jioints, complete all as specified and directed. |
| 52 | M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished even & smooth without using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners at mandatory and filled with sealing compound grade A, complete all as specified and directed. |
| 53 | M&L for salt glazed stoneware gully traps, size150mm x 150mm square or round mouthed, type 'P', complete all as specified and directed. |
| 54 | M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes of 150mm bore after they are laid and tested, complete all as specified and directed. |
| 55 | M&L for 100mm bore reinforced concrete pipes, Class NP2, laid in trenches and jointed complete with collars, complete all as specified and directed. |
| 56 | Returning, filling in including spreading, levelling and well ramming in layers not exc 25cm in thick each, complete all as specified and directed. |
| 57 | Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required, complete all as specified and directed. |
| 58 | Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 59 | M&L for 3 layer rotational moulded polyethylene water storage tanks any colour 500 ltr Capacity (Cylindrical vertical with closed top), hoisted and fixed in position including tank nipple inlet and outlet and conneting pipes all as specified in SSR Part-I complete all as specified and directed. |
| 60 | M&L for 3 layer rotational moulded polyethylene water storage tanks any colour 1000 ltr Capacity (Cylindrical vertical with closed top), hoisted and fixed in position including tank nipple inlet and outlet and conneting pipes all as specified in SSR Part-I complete all as specified and directed. |
| 61 | S&F 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 62 | Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store, laid on floor or wall, complete all as specified and directed. |
| 63 | Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store, laid on floor or wall, complete all as specified and directed. |
| 64 | S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 65 | S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 66 | M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting exc 10cm but not exc 20cm girth on brick wall, complete all as specified and directed. |
| 67 | S&F stop valve cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed to 20mm bore pipe, complete all as specified and directed. |
| 68 | S&F stop valve cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed to 15mm bore pipe, complete all as specified and directed. |
| 69 | S&F stop valve of make Jaquar / Roca / Cera, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with capstan head handle, screwed both ends for 15mm boe iron pipe or for unions, complete all as specified and directed. |
| 70 | S&F fancy type chromium plated angle valve of make Jaquar / Roca / Cera with wall flange, fixed to 15mm bore pipe, complete all as specified and directed. |
| 71 | S&F 15mm dia bib tap of make Jaquar / Roca / Cera, fancy type chormium plated with crutch or butterfly handles, screwed down, screwed for iron pipes or for brass ferrule, long body, complete all as specified and directed. |
| 72 | S&F single piece WC of size 690mm x 345mm x 850mm of make Jaquar (Cat Part No. SLS-WHT-0208), trap distance vitreous china ware coloured EWC pedestal patern alongwith premoulded 10 ltrs vitrreous china ware cistern, complete all as specified and directed. |
| 73 | S&F 600mm x 450mm size bevelled edge mirror of selected quality glass of 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with sheet glass assembly consisting of 5.5mm glass sheet 12mm wide with chromium plated brackets, complete all as specified and directed. |
| 74 | S&F 6mm thick looking mirror of size 1.50 mtr x 0.60 mtr, fixed on 12mm thick marine plywood with powder coated aluminium frame alround the mirror including mounted on wall, complete all as specified and directed. |
| 75 | S&F urinal valve auto closing system of make Jaquar (Cat Part No. PRS-077) with built in control cock and wall flange valve 15mm bore including urinal sperader of brass CP, complete all as specified and directed. |
| 76 | S&F vitreous china urinal half stall type, colour as approved by GE excluding flushing cistern, flush pipe and waste pipe, complete all as specified and directed. |
| 77 | S&F fancy type vitreous china counter top wash hand basin \\"OVAL\\" shaped, white of size 550mm x 400mm including brass CP bottle trap and brass CP pillar cock with and including green marble inserted in 18mm thick mounted green marble stone slab platform by cutting on oval shaped etc, completed all as specified and directed.Note :- Green marble cutting shall be measured and paid separately. |
| 78 | S&F in replacement of vitreous china, white, wash hand basin, flat back of size 550x400mm including MS brackets including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, complete all as specified and directed. |
| 79 | Extra over for cutting and moulding of green marble in oval shaped to accommodate WHB of size 550mm x 400mm, complete all as specified and directed. |
| 80 | S&F CP towel ring of 200mm dia, complete all as specified and directed. Make :- Jaquar Cat Part No. AQN-7721 / Cera Cat Part No. F 5002105 or equivalent as listed in PS and as decided and approved by GE. |
| 81 | S&F in replacement of 20mm dia brass chromium plated tubular towel rails, 'D' type 60cm long between flanges, complete all as specified and directed. |
| 82 | S&F corner glass self (with CP brakets) of size 225mm x 225mm, complete all as specified and directed. Make :- Jaquar Cat Part No. CAN-1173 / Cera Cat Part No. F 5005102 or equivalent as listed in PS and as decided and approved by GE. |
| 83 | S&F centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed. Make :- Jaquar Cat Part No. SOL-6169B / Cera Cat Part No. QTF 2006461 or equivalent as listed in PS and as decided and approved by GE. |
| 84 | S&F health faucet brass chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed. Make :- Jaquar Cat Part No. ALD-573 / Cera Cat Part No. F 8030103 or equivalent as listed in PS and as decided and approved by GE. |
| 85 | S&F PVC flexible connection pipe of make Jaquar Cat Part No. ALD-801B, 600mm long 15mm dia with brass flange nuts & washers, complete all as specified and directed. |
| 86 | S&F PVC flexible connection pipe, 450mm long 15mm dia with brass flange nuts & washers, complete all as specified and directed. |
| 87 | S&F toilet paper holder brass chromium plated, heavy duty, fixed with brass screws, complete all as specified and directed. Make :- Jaquar Cat Part No. ACN-1153N / Cera Cat Part No. F 5007109 or equivalent as listed in PS and as decided and approved by GE. |
| 88 | S&F in replacement of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 89 | S&F in replacement of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 90 | S&F in replacement of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 91 | S&F in replacement of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 92 | S&F 110mm bore PVC (SWR) pipes single socketd in any length with rubber ring joints, laid in trenches or in floor or fixed to walls with MS clamps of suitable size, complete all as specified and directed. |
| 93 | S&F 75mm bore PVC (SWR) pipes single socketd in any length with rubber ring joints, laid in trenches or in floor or fixed to walls with MS clamps of suitable size, complete all as specified and directed. |
| 94 | S&F PVC (SWR) bends of any radius, suitable for 75mm bore pipe, complete all as specified and directed. |
| 95 | S&F PVC (SWR) bends of any radius, suitable for 110mm bore pipe, complete all as specified and directed. |
| 96 | S&F PVC (SWR) junction single or double, equal or unequal, suitable for 75mm bore pipe, complete all as specified and directed. |
| 97 | S&F PVC (SWR) junction single or double, equal or unequal, suitable for 100/110mm bore pipe, complete all as specified and directed. |
| 98 | S&F PVC (SWR) vent cowl, suitable for 75mm bore pipe, complete all as specified and directed. |
| 99 | M&L PVC (SWR) floor trap/ nahani trap plain with grating including jointing with solvent 75mm dia of contilen, complete all as specified and directed. |
| 100 | S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75mm dia of contilent, complete all as specified and directed. |
| 101 | M&L for PVC (SWR) gully trap of 125/100mm size, setting and jointing with solvent cement, complete all as specified and directed. |
| 102 | S&F in replacement of 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with access door etc, complete all as specified and directed. |
| 103 | S&F in replacement of 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with access door etc, complete all as specified and directed. |
| 104 | S&F in replacement of PVC (SWR) reducers, complete all as specified and directed. |
| 105 | S&F low density polyethene pipes (LDPE) of 32mm bore of pressure rating 6 Kg/cm2, fixed to walls, complete all as specified and directed. |
| 106 | M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick including watering and ramming to a true surface, complete all as specified and directed. |
| 107 | Demolition of cement concrete (un-reinforced) as in ground floor and paving area of any type and any thickness, complete all as specified and directed. |
| 108 | Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards / slabs / blankets of any thickness including cover fillets, complete all as specified and directed. |
| 109 | Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. |
| 110 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. |
| 111 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor base of tiles, complete all as specified and directed. |
| 112 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on vertical / inclined wall surface, complete all as specified and directed. |
| 113 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall, complete all as specified and directed. |
| 114 | S&F pressed steel frames for doors of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. |
| 115 | S&F 35mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 116 | S&F 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied and fitted to chowkats at site, complete all as specified and directed. |
| 117 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples, complete all as specified and directed. |
| 118 | M&L for preparation of new plastered surfaces by using necessary compound of Altek/Birla white putty 1 to 1.2mm thick to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint, complete all as specified and directed. |
| 119 | M&L for preparation of old plastered or un-plastered surface by brooming down or steel wire brushing, scraping down smoke soots, moulds, moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed. |
| 120 | M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 121 | M&L for preparation of new or previously untreated steel and iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 122 | M&L for preparation of new or previously untreated steel and iron surface of any description exc 10cm width or girth and applying two coats of aluminium paint over a coat of primer, complete all as specified and directed. |
| 123 | S&F mild steel chromium plated 20mm dia curtain rod with and including fixing of brackets, stops, roller, knobs etc, complete all as specified and directed. |
| 124 | S&F aluminium sliding window, ventilator shutter with chowkat of powder coated, 5mm thick glass, stainless steel wire gauge for shutters etc. without sash bars, aluminium sections (20076 weighting 1.608 Kg/m) (thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 5mm thick tinted glass, stainlee steel wire gauge for shutter three track (02 Nos shutter glazed & 01 No wire gauge) etc, complete all as specified and directed. |
| 125 | Dismantling of structural steel work in any description, complete all as specified and directed. |
| 126 | S&F steel ventilators, fixed type with glazing bars, complete all as specified and directed by Engr-in-Charge. |
| 127 | S&F 1mm thick mild steel sheet as eaves gutters of 150mm dia, glvanised class 3, half round with rounded edges, complete all as specified and directed. |
| 128 | M&L for 18-20mm thick machine cut kota stone slab over and including cement screed base 15mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 129 | M&L for 18-20mm thick kota stone slab as in riser of steps, skirting, dado and pillar, fixed laid over and including 10mm thick rendering in CM 1:4 and jointed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 130 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in walls or retaining walls, in pressed door frame of any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts, complete all as specified and directed. |
| 131 | S&F soap dish of make Jaquar / Roca / Cera, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, complete all as specified and directed. |
| 132 | S&F CP brass grating of 75mm dia with centre hole, complete all as specified and directed. |
| 133 | S&F CP brass grating of 75mm dia without centre hole, complete all as specified and directed. |
| 134 | M&L for 75mm thick PCC 1:4:8 type D-1 (using 20mm graded crushed stone aggregates) as in sub base, complete all as specified and directed. |
| 135 | M&L for machine pressed precast conctete interlocking paver block of any shape and size, confirming to IS:15658-2006 of 60mm thickness M-35 Grade joint with white cement and pigment, set and laid over and including 50mm thick sand cusioning, complete all as specified and directed. |
| 136 | M&L for cement concrete chequered tiles of size 30cm x 30cm x 10mm thick each, coloured with grey cement and admixtures, set, jointed and pointed in neat cement slurry as in floors, laid over and including 15mm thick screed bed in CM 1:4 , complete all as specified and directed. Please Enable Macros to View BoQ information |
| 137 | M&L for cement concrete chequered tiles of size 30cm x 30cm x 10mm thick each, coloured with grey cement and admixtures, set, jointed and pointed in neat cement slurry as in floors, laid over and including 15mm thick screed bed in CM 1:4 , complete all as specified and directed. Please Enable Macros to View BoQ information |
