Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SITE CLEARANCE AND DISMANTLING |
| 2 | Cutting of trees including Cutting of trees, removal of stumps and roots of trees (stacking of serviceble material with all lifts and up to a lead of 1000 metres.)Removal of stumps, roots, staking of serviceable material with all lifts up to a lead of 1000 metres and earth filling in the depression/ pit. |
| 3 | (a) Girth from 300 mm to 600 mm |
| 4 | (b) Girth from 600 mm to 900 mm |
| 5 | (Dismantling of flexible pavement) Dismantling of flexible pavements and disposal of dismantled materials upto a leadof 1000 metres, stacking serviceable and unserviceable materials separately (By mechanical means) (Bituminous courses) |
| 6 | (Dismantling of flexible pavement) Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately (By mechanical means) (Granular courses) |
| 7 | (Dismantling of kerb stone) Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metres |
| 8 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concree, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with allk lifts and lead of 1000 metres |
| 9 | Lime/ Cement concrete |
| 10 | By Manual means |
| 11 | Lime concrete, cement concrete grade M-10 and below |
| 12 | Cement concrete Grade M-15 & M-20 |
| 13 | Prestressed/ Reinforced cement concrete grade M-20 & above |
| 14 | Steel work in all types of sections upto a height of 5m above plinth level excluding cutting of rivet. Excluding dismembering |
| 15 | (Removal of telephone/Electric poles and lines) Removal of telephone/ Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department , disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately |
| 16 | (Clearing and grubbing road land )Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and tress girth upto 300 mm, removal of stumps of tree cut earlier and disposal of unserviceable materials and stacking of sericeable material to be used of auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. |
| 17 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of EA. |
| 18 | EARTH WORK |
| 19 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 20 | Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2) Rolling with vibratory roller |
| 21 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 22 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classification of soil item - B). |
| 23 | Clearing grass and removal of rubbish up to a distance of 50 meters outside the periphery of the area |
| 24 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 25 | Providing designation 75B one Brick Flat Soling joints with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I. |
| 26 | GRANNULAR SUB BASE COURSES AND BASE COURSES ( NON- BITUMINOUS ) |
| 27 | (Granular Sub-Base with Graded Material (Table:- 400-1))Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.(Grading-V) (By mix in place method) |
| 28 | BITUMINOUS COURSES /CONCRETE PAVEMENT |
| 29 | Providing and laying in position cement concete of soecified grade excluding the cost of centering and shuttering - All work up tp plinth level 1:4:8 (1 cement :4 coarse sand (Zone -III) :8 graded stone aggregrate 40 mm normial size) |
| 30 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 31 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting In position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. |
| 32 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 33 | (Tack coat on Bituminous surfaces) Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 34 | Tack Coat on Cement concrete pavementProviding and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 35 | (Dense Graded Bituminous Macadam Grading-I With VG-40 Bulk Bitumen) Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects With VG-40 Bulk Bitumen. |
| 36 | (Bituminous concrete Grading- II With VG-40 Bulk Bitumen) Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects With VG-40 Bulk Bitumen. |
| 37 | Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.) |
| 38 | Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ) |
| 39 | BIRCK WORK |
| 40 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 41 | PLASTER/FINISHING WORK |
| 42 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of FM 1.5 with 5% cico or any other approved water proofing compound including screening, curing, with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 44 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 SQM) over and including priming coat of exterior primer applied @ 2.20kg/10 SQM |
| 45 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
| 46 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 47 | DRAIN AND CROSS DRAINAGE |
| 48 | (Excavation for strucutres ) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.(Ordinary soil) (Mechanical means) (Depth upto 3 m) |
| 49 | Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications.(PCC Grade M15 using batching plant & concrete pump) |
| 50 | Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications.(PCC Grade M15 using batching plant & concrete pump) |
| 51 | Plain/Reinforced cement concrete complete as per drawing and technical specification, (PCC Grade M 25 using Batching Plant |
| 52 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications. |
| 53 | Centering shuttering including structting, propping etc.and removal of form for, Foundations, footing, bases of columns etc for mass concrete |
| 54 | Centering and shuttering including strutting, propping etc. and removal of form for : Wall any thickness |
| 55 | Centering shuttering including structting, propping etc.and removal of form for, Suspended floors,roofs,lancing,balcones and access platform |
| 56 | Laying Reinforced cement concrete pipe NP4/ prestressed concrete pipe for culverts on first class bedding of granular material in double rowincluding fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets.1000 mm dia |
| 57 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications |
| 58 | Wrought iron and mild steel welded work (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately (at every 20m) |
| 59 | Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme onthe boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. |
| 60 | Supply fitting installation testing of 800x800 grated manhole cover capable of carrying load of 40 MT load (As per BSEn124 and strength of D400) with cast iron all complete as per direction of engineer in charge |
| 61 | Providing & applying 2 component cold plastic paint rolled on surfacing material solvent free, skid resistant,material which has property of attaining 1.5-2.0 mm thickness in single coat application (Red) Including surface cleaning and cost of material etc. (All complete as per directions of engineer in charge).(All-inclusive on Bitumen & concrete surface) work shall carried out as per IRC:35-2015 (clause2.4). |
| 62 | \\"Providing and laying 25mm thick. Kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime mortar (1:1:1) (lime putty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royality all complete as per building specification and direction of E/I.(iv) 600 x 600 mm size\\" |
| 63 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 64 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. 11.28.1 Red sand stone |
| 65 | Providing and laying tactile tile (for vision impaired persons as perstandards) of size300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 66 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 67 | CARRIAGE OF MATERIALS |
| 68 | CEMENTS (UPTO 5 KM LEAD) |
| 69 | Sand (38 KM.) |
| 70 | Stone Chips (37 KM.) |
| 71 | STEEL (UPTO 5 KM LEAD) |
| 72 | BRICKS (UPTO 10 KM LEAD) |
| 73 | TRAFFIC SIGNS, ROAD MARKINGS AND OTHER ROAD APPURTUNENCES |
| 74 | Providing & applying 2 component cold plastic paint rolled on surfacing material solvent free, skid resistant,material which has property of attaining 1.5-2.0 mm thickness in single coat application (Red) Including surface cleaning and cost of material etc. (All complete as per directions of engineer in charge).(All-inclusive on Bitumen & concrete surface) work shall carried out as per IRC:35-2015 (clause2.4). |
| 75 | Providing and fixing of precast cement concrete full batter kerbs, edgings etc. as dimensioned 450mm x 300mm x 150mm in M-20 grade as per approved design and pattern. (All complete as per directions of engineer in charge). |
| 76 | Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) |
| 77 | Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode.The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280.The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz.There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10mmx100mmx100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively.The weight of the marker shall not exceed 0.5 Kilograms.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer.) |
| 78 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) |
| 79 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. |
| 80 | Cautionary/ Warning signs ( 90 cm Eq. triangle) |
| 81 | 60 cm circular |
| 82 | (80 cm x 60 cm) |
| 83 | 60 cm x 45 cm rectangular |
| 84 | 90 cm high Octagon |
| 85 | Direction and Place Identification Signs with size more than 0.9 sqm size Board.(Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm Angle mounted on two nos. of mild steel circular pipe 65 NB, 3.2mm thickness and 4.5m meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) |
| 86 | Road Delineators (Supplying and installation of delineators (Road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings.)a) delineators |
| 87 | Horticulture & Landscaping |
| 88 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 89 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). |
| 90 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : 2.4.3 Screened through sieve of I.S. designation 4.75 mm |
| 91 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 92 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 93 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) |
| 94 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 95 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge |
| 96 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 90 cm dia, and 90 cm deep |
| 97 | Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge. |
| 98 | Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. |
| 99 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. |
| 100 | Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3- 4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 101 | Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge. |
| 102 | Providing and stacking of Hibiscus variegated of height 60-75 cm. with healthy variegated foliage in earthen pots size 25 cm as per direction of the officer-in-charge. |
| 103 | Providing and stacking of Jatropha multifida (red colour) of height 60-75 cm. multibranched in p.bag of size 25 cm as per direction of the officer-in-charge. |
| 104 | Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. |
| 105 | Providing and stacking of Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 106 | Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 75-90 cm. with 5-6 branches in bag of size 25 cm as per direction of the officer-in-charge. |
| 107 | Providing and stacking of Tecoma stans of height 90-105 cm. bushy in big size HDPE bag as per direction of the officer-in-charge. |
| 108 | Providing and displaying of Areca Palm having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 109 | Providing and displaying of Dracaena song of India specimen (three in one), having ht. 60 cm & above, well developed, fresh and healthy with good foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 110 | Providing and displaying of Raphes palm having ht. 45 cm to 60 cm with 5 to 7 suckers, well developed, full of fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 111 | Providing and Displaying Acalypha twisted well developed with fresh & healthy 30 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. |
| 112 | Providing and stacking of Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge. |
| 113 | Providing and stacking of Spider Lily (Hymenocallis littoralis) in polybags |
| 114 | Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 115 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 116 | Providing of Schefflera Green (three in one), mounted on moss stick 90 cm, well developed with full of fresh & healthy leaves from bottom to top with rich foliage in 25 cm size of Earthen pot/Plastic pot.as per direction of officer-in-charge. |
| 117 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge |
| 118 | Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 119 | Providing and stacking of Ophiopogon jaburan ( variegated ),full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. |
| 120 | Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. |
| 121 | Providing and stacking of Daniella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 122 | Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge |
| 123 | Providing and stacking of Foxtail palm of ht. 180-210 cm bottom girth 25- 30 cm well developed in big size HDPE bags as per direction of the officer-in-charge. |
| 124 | Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 125 | Supply and planting of 3-meter-high Date Palm (Phoenix dactylifera), healthy and well-formed with a developed root ball, including transportation to site, pit preparation, planting, staking, and maintenance such as watering and fertilizing for 3 months; measured and paid per tree (each). |
| 126 | BAMBOO |
| 127 | Providing and Displaying Bamboo Buddha vally variety with umbrella shape having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy as per direction of the officer-in-charge. |
| 128 | CREEPER |
| 129 | Providing and stacking of Bignonia venusta (Golden shower) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 130 | Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 131 | Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 132 | Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 133 | Providing and stacking of Albizia lebbeck (Siris) of height 150-165 cm in polybags |
| 134 | Providing and stacking of Azadirachta indica (Neem) of height 120-130 cm in polybags |
| 135 | Providing and stacking of Bauhinia purpurea (Purple Kachnar) of height 150-165 cm in polybags |
| 136 | Providing and stacking of Bombax ceiba (Silk Cotton) of height 150-165 cm in polybags |
| 137 | Providing and stacking of Cassia fistula (Amaltas) of height 120-135 cm in polybags |
| 138 | Providing and stacking of Delonix regia (Gulmohar) of height 4’-5’ in polybags |
| 139 | Providing and stacking of Mimusops elengi (Moulshari) of height 4’-5’ in polybags |
| 140 | Supply and planting of 3-meter-high Terminalia Mantaly (Madagascar Almond), healthy and well-branched with a developed root system, including transportation to site, pit preparation, planting, staking, and maintenance such as watering and fertilizing for 3 months; measured and paid per tree (each). |
| 141 | Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account.(a) Girth of tree shall be measured at a height of 1m above ground level. |
| 142 | Girth of trees upto 50cm. |
| 143 | Girth of trees beyond 50cm and upto 90cm. |
| 144 | Girth of trees beyond 90cm and upto 150cm. |
| 145 | Girth of trees beyond 150cm. |
| 146 | STREET FURNITURE |
| 147 | Agra Red Sandstone Jali, smooth finish, H/Thick: Per SQF x 35 to 40 M/M/ Cm. |
| 148 | Agra Red Sandstone Pillar, smooth finish, H/Thick: 120\\" Inch, Diameter: 16\\" Inch, Weight: 329 Kg. |
| 149 | Beige Sandstone Sculpture, smooth finish, H/Thick: 52\\" Inch, Weight: 1142 Kg. |
| 150 | Kandla Grey Sandstone Bollards, smooth finish, W: 8\\" Inch, L: 8\\" Inch, H/Thick: 27\\" Inch. |
| 151 | Kandla Grey Sandstone Carved Bench, W: 60\\" Inch, L: 16\\" Inch, H/Thick: 18\\" Inch, Weight: 210 Kg. |
| 152 | Teak Wood Sandstone Gazebo, natural finish, Diameter: 168\\" Inch, Weight: 10080 Kg. |
| 153 | Rajasthan Black Granite Ball Shape Bollards, Honed Finish, Diameter: 16\\" Cm. |
| 154 | Mandana Red Stone Monolith, natural finish, W: Free Size Cm. |
| 155 | Autumn Brown Stone Monolith, natural finish, W: Free Size Cm. |
| 156 | Teak Wood Sandstone bench, smoothl finish, width 72'' inch, length 18'' height 18'' |
| 157 | CAST IRON BENCHCast iron powder-coated garden bench with 3-seater capacity, designed with integrated seat and backrest for outdoor use. The side frames are made of robust cast iron, while the seat and backrest are fabricated from 14-gauge mild steel pipes, ensuring strength and durability. The bench features a decorative leg design, armrests, and backrest for enhanced comfort. Finished with weather-resistant powder coating suitable for long-term outdoor installation. Dimensions: total height 480 mm, seat height 350 mm, width 410 mm, total length 1225 mm. Load-bearing capacity up to 150 kg |
| 158 | Providing and supplying 900 mm high precast concrete bollards of approved shape and size, made with M25 grade concrete, finished smooth, including reinforcement as required, with provisions for fixing or embedding into the ground, complete with transportation and installation at site as per the Engineer-in-Charge’s direction. |
| 159 | Providing and supplying factory-made Mild Steel (MS) tree grating, size 1200 mm x 1200 mm, fabricated from high-quality MS bars with suitable spacing to allow air and water passage to tree roots. The grating shall be thoroughly cleaned, treated with anti-corrosive primer, and finished with a durable powder coating to ensure resistance against weathering and rust. The MS tree grating shall be fixed on a concrete base with proper anchorage and leveling as per the Engineer-in-Charge’s instructions. Equivalent makes such as Pidilite, local approved manufacturers or as directed by the Engineer-in-Charge shall be used. |
| 160 | Providing and supplying factory-made precast concrete planter boxes of size 1200 mm x 1200 mm (or as specified), in approved shapes such as rectangular, square, circular, or geometric designs, by KK Manhole & Gratings Co. Pvt. Ltd. or equivalent approved manufacturer. The planter boxes shall be manufactured from M-30 grade reinforced concrete using vibro-compaction for enhanced strength and durability. They shall have adequate drainage provisions and smooth finished surfaces with options for plain grey, terrazzo, or pigmented colors as approved by the Engineer-in-Charge. Designed for outdoor urban landscaping and streetscape applications, the planters shall be weather-resistant and require minimal maintenance. Installation shall be carried out as per specifications and direction of the Engineer-in-Charge. |
| 161 | Providing and installing custom perforated screen panel façade / cladding fixed system of Hunter Douglas or equivalent of various sizes maximum up to 996 mm (Width) X 2500 (Length) mm and including MS frame and accessories all complete as per the design requirement shall be manufactured from high corrosion resistant aluminum alloy AA 3105 of 2mm thickness based on wind load and design which shall be fixed to MS structure and sub frame (extra not included in Hunter Douglas scope) Screen panels shall have customized perforation as per the approved design and is to be provided to suite the design Panels. Panels shall be coated on visible side with exterior grade Super durable polyester powder coating for minimum 60 microns in approved color. Manufacturer should have inhouse testing lab and powder coating line (with Nanotechnology & Catalytic Converter. Maximum open area shall be maximum up to 20 %. The panels of required length and height shall be fixed to sub structure by means of screen panel guide clamps of 50mm X 75mm X 3mmmade of aluminium. Panels shall be bending from all four sides and shall have extended flanges to accommodate clamps. The Panels shall be fixed to a suitable structure by means of fixing side extrusion fixed to the panel at appropriate centers to proprietary metal clamp as per the proprietary design to a support system taking into account the relevant wind loads and a dead load. Installation shall be carried out as per manufacturer recommendation. The manufacturer should be ISO 9001: 2015 Quality Management System Certification from BSI institute. Indian Manufacturer should have the proven manufacturing capabilities in India and expertise for the specified product, the manufacturer should have proven past experience of design, supply, manufacture and successfully installed the similar product in the major Government / Govt. Infrastructural projects or reputed private projects in the last ten (10) years..Mode of Measurements: Measurements shall be area measurable as per drawing area and supply of panels. |
| 162 | ART WORK |
| 163 | ARTISTIC SCULPTURE DEPICTING TRIBALS, FREEDOM FIGHTERS/LEADER, TRIBAL ART WITH SCULPTURE\ AND EXTERNAL CONCEPT Creation - 4 MTRX 3 MTR X 3 MTR Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, Display of actual size dummy /mock up Fabricated in sun board with digital print for client approval. Artwork Execution:Execution of approved design in ss 316 grade steel / stone/casted alluminum pu colored antique as per approved finish (mrf/akzo nobel) and protected against discoloration by sealing it with top coat of Mrf/Akzo nobel clear Pu. Proper support system will be given as per approved shop drawing & Staad file etc., to withstand high wind pressure. The sculpture will be free from any Undulation/Dent unless it is part of the design. The cost is inclusive of transport/packing and installation of the same at site. Fastener/screws hilti or equivalent company.Approved Make - East Craft Designs Pvt. Ltd., New Delhi/ Ram Sutar or equivalent artist with relevant experience |
| 164 | Hand painting directly on wallConcept Creation Creating design and creation of Artwork concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, display of actual size dummy /mockup Fabricated in sun board with digital print for client approval.ARWORK EXECUTIONTowards the cost doing hand painting using artist quality colors by qualified artists all under the watchful eyes of expert artist |
| 165 | SIGNAGES |
| 166 | Providing and fixing in position Non-Illuminated Pole mounted Speed limit -Informational signage consisting of the following:Signs made in Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPA typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns, ISO:9001-2008 certified) International standards, with Lifetime warranty under normal working conditions. 1. Signage face made out of ‐ 3mm thick Aluminum sheet fabrication with a white retroreflective film, fixed to horizontal structural truss. Graphics as per requirement of respective vinyl and shade.2. Signage structure ‐ MS square post shaped 50 x 50 x 5 mm or 60 x 40 x 5 mm and mounting square sections, powder coated as per . Mounting square section span and the wind loads.3. Sign frame - Cosign make modular extruded aluminium profile Module plus outdoor system -Consisting of main pole 80 mm Octagonal shaped (1 nos) screw fitted with M.S structure vertically & horizontally, Coverlist profile inserted in octagonal shaped profile to hide screw fitting arrangement completely. Plastic moulded endcap (black coloured) on top side to cover octagonal shaped profile, attached to with 50 mm depth aluminium frame with 80 mm radius round corners as per design requirements with 80 mm radius round corners as per design requirements for media signage mounting , with media accommodation depth of 6 mm, frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole.4. Media - ACP /Acrylic router cut - vinyl wrapped / pasted with thickness upto 5 mm can be pasted (with help of dual lock or foam based 3M make double sided tape) on 50 mm depth profile (on both side) including post, RCC foundations, electrical connections (as required), cutting and opening the floor finish (as required) at location, and making good to match the original finish after fixing and installation of signage with all accessories such as thimbles, end connectors, nut‐inserts, screws, rivets, bolts, washers, nuts, etc. all complete with due considerations to harsh outdoor conditions as per approved design/ drawings and instructions of the engineer-in-chargePost Size 3000mm, Frame Size: 750mm x 250mm & 450mm x 450mm |
| 167 | Providing and fixing in position Non-Illuminated Pole mounted Speed limit -Informational signage consisting of the following:Signs made in Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPA typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns, ISO:9001-2008 certified) International standards, with Lifetime warranty under normal working conditions. 1. Signage face made out of ‐ 3mm thick Aluminum sheet fabrication with a white retroreflective film, fixed to horizontal structural truss. Graphics as per requirement of respective vinyl and shade.2. Signage structure ‐ MS square post shaped 50 x 50 x 5 mm or 60 x 40 x 5 mm and mounting square sections, powder coated as per . Mounting square section span and the wind loads.3. Sign frame - Cosign make modular extruded aluminium profile Module plus outdoor system -Consisting of main pole 80 mm Octagonal shaped (2 nos) screw fitted with M.S structure vertically & horizontally, Coverlist profile inserted in octagonal shaped profile to hide screw fitting arrangement completely. Plastic moulded endcap (black coloured) on top side to cover octagonal shaped profile, attached to with 50 mm depth aluminium frame with 80 mm radius round corners as per design requirements with 80 mm radius round corners as per design requirements for media signage mounting , with media accommodation depth of 6 mm , frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole.4. Media - ACP /Acrylic router cut - vinyl wrapped / pasted with thickness upto 5 mm can be pasted (with help of dual lock or foam based 3M make double sided tape) on 50 mm depth profile (on both side) including post, RCC foundations, electrical connections (as required), cutting and opening the floor finish (as required) at location, and making good to match the original finish after fixing and installation of signage with all accessories such as thimbles, end connectors, nut‐inserts, screws, rivets, bolts, washers, nuts, etc. all complete with due considerations to harsh outdoor conditions as per approved design/ drawings and instructions of the engineer-in-charge |
| 168 | Providing and fixing in position Non-Illuminated Pole mounted Speed limit -Informational signage consisting of the following:Signs made in Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPA typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns, ISO:9001-2008 certified) International standards, with Lifetime warranty under normal working conditions. 1. Signage face made out of ‐ 3mm thick Aluminum sheet fabrication with a white retroreflective film, fixed to horizontal structural truss. Graphics as per requirement of respective vinyl and shade.2. Signage structure ‐ MS square post shaped 50 x 50 x 5 mm or 60 x 40 x 5 mm and mounting square sections, powder coated as per . Mounting square section span and the wind loads.3. Sign frame - Cosign make modular extruded aluminium profile Module plus outdoor system -Consisting of main pole 80 mm Octagonal shaped (2 nos) screw fitted with M.S structure vertically & horizontally, Coverlist profile inserted in octagonal shaped profile to hide screw fitting arrangement completely. Plastic moulded endcap (black coloured) on top side to cover octagonal shaped profile, attached to with 50 mm depth aluminium frame with 80 mm radius round corners as per design requirements with 80 mm radius round corners as per design requirements for media signage mounting , with media accommodation depth of 6 mm , frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole.4. Media - ACP /Acrylic router cut - vinyl wrapped / pasted with thickness upto 5 mm can be pasted (with help of dual lock or foam based 3M make double sided tape) on 50 mm depth profile (on both side) including post, RCC foundations, electrical connections (as required), cutting and opening the floor finish (as required) at location, and making good to match the original finish after fixing and installation of signage with all accessories such as thimbles, end connectors, nut‐inserts, screws, rivets, bolts, washers, nuts, etc. all complete with due considerations to harsh outdoor conditions as per approved design/ drawings and instructions of the engineer-in-charge900 mm (W) x 1200 mm (H) Approx (2400 mm post height) |
| 169 | Providing and fixing in position Non-Illuminated Pole mounted Speed limit -Informational signage consisting of the following:Signs made in Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPA typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns, ISO:9001-2008 certified) International standards, with Lifetime warranty under normal working conditions. 1. Signage face made out of ‐ 3mm thick Aluminum sheet fabrication with a white retroreflective film, fixed to horizontal structural truss. Graphics as per requirement of respective vinyl and shade.2. Signage structure ‐ MS square post shaped 50 x 50 x 5 mm or 60 x 40 x 5 mm and mounting square sections, powder coated as per . Mounting square section span and the wind loads.3. Sign frame - Cosign make modular extruded aluminium profile Module plus outdoor system -Consisting of main pole 80 mm Octagonal shaped (1 nos) screw fitted with M.S structure vertically & horizontally, Coverlist profile inserted in octagonal shaped profile to hide screw fitting arrangement completely. Plastic moulded endcap (black coloured) on top side to cover octagonal shaped profile, attached to with 50 mm depth aluminium frame with 80 mm radius round corners as per design requirements with 80 mm radius round corners as per design requirements for media signage mounting , with media accommodation depth of 6 mm, frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole.4. Media - ACP /Acrylic router cut - vinyl wrapped / pasted with thickness upto 5 mm can be pasted (with help of dual lock or foam based 3M make double sided tape) on 50 mm depth profile (on both side) including post, RCC foundations, electrical connections (as required), cutting and opening the floor finish (as required) at location, and making good to match the original finish after fixing and installation of signage with all accessories such as thimbles, end connectors, nut‐inserts, screws, rivets, bolts, washers, nuts, etc. all complete with due considerations to harsh outdoor conditions as per approved design/ drawings and instructions of the engineer-in-chargePost Height 1800mm, Frame Size: 450mm x 450mm Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
