Helical worm gearmotor for Long conveyor B Shop and STN-4 Main outgoing chip conveyors machine chip conveyor to model no-SK 42125-100LP/4 TF of M/S NODES AND LOADS OR Equivalent 1) Acce ptable make of gear box-NODES AND LOADS,POWER BUILD,NEW ALLEN BERRY,SHANTHI GEARS, SEW.2) Ac ceptable make of motor-ABB,BHARATH BIJLEE,NODES AND LOADS,SIEMENS,CROMPTON GREAVES,SEW ,Tec hnical Specification: 1) Power -2.2 KW, 2) Input speed-1460 rpm ,3) Output speed-19 rpm ,4) Ratio-76.95 ,5 ) Output torque- 894 Nm, 6) Voltage-230/400 V, 7) Frequency-50Hz ,8) Efficiency class-IE3 ,9) Enclosure-IP5 5, 10)Type of housing-Foot mount, 11) Mounting position-M4(should be capable for horizontal and vertical mounting without any modification) ,12) Output shaft-Solid keyed shaft,13) Output shaft diameter-60 x 120 mm. 14) Motor cooling -TEFC 15) Service factor-2.5. 16) The motor used shall be without any modification either on Shaft/ Flange.17) Mounting hole to hole -180mm X 200 mm.18) Mounting hole dia-22mm.19) War ranty: 18 months from the date of supply or 12 months from the date of commissioning. 20) Motor Inverter Speed Range Standard Line Powered - Inverter Capable(Motor should be designed to work with VFD in the r ange 25Hz to 65Hz. 21) Base weight-125 kg maximum. 22) The overall length shall not exceed 700 mm. 2 3)Gear motor should be Unicase(housing (casing) is made as a single, integral unit) type. SPECIAL CONDITI ONS 1)The offerer shall furnish Technical specification catalogue/Data sheet duly indicating dimensional de tails, torque value and motor details during tender participation and along with material supply.2) Only Aut horized dealers or Manufactures of above mentioned makes shall participate in tender.3) Drawing of model no- SK 42125-100LP/4 TF is attached for reference only. [ Warranty Period: 18 Months after the date of d elivery ] ]
2
Helical worm gearmotor for STN-1 and STN-2 Main outgoing chip conveyors machine chip co nveyor to model no-SK 42125 - 132SP/4 TF of M/S NODES AND LOADS OR Equivalent 1)Acceptable make of gear box-NODES AND LOADS,POWER BUILD,NEW ALLEN BERRY,SHANTHI GEARS, SEW.2)Acceptable make of motor-ABB,BHARATH BIJLEE,NODES AND LOADS,SIEMENS,CROMPTON GREAVES,SEW ,Technical Specifica tion: 1) Power -5.5 KW,2) Input speed-1465 rpm ,3) Output speed-19 rpm ,4) Ratio-76.95 ,5) Output torque- 2229 Nm, 6) Voltage-400/690 V, 7) Frequency-50Hz ,8) Efficiency class-IE3 ,9) Enclosure-IP55, 10)Type of h ousing-Foot mount, 11) Mounting position-M1,12) Output shaft-Solid keyed shaft/B side position,13) Output shaft diameter-60 x 120 mm. 14) Motor cooling -TEFC. 15) Service factor-1. 16) The motor used shall be wi thout any modification either on Shaft/ Flange.17) Mounting hole to hole -180mm X 200 mm.18) Mounting hole dia-22mm . 19) Motor Inverter Speed Range Standard Line Powered - Inverter Capable(Motor should b e designed to work with VFD in the range 25Hz to 65Hz.20) Output Shaft Side-B side.21) Base weight-160 k g maximum. 22) Warranty: 18 months from the date of supply or 12 months from the date of commissionin g. 23) The overall length shall not exceed 770 mm. 24) Gear motor should be Unicase(housing (casing) is made as a single, integral unit) type. SPECIAL CONDITIONS 1)The offerer shall furnish Technical specificatio n catalogue/Data sheet duly indicating dimensional details, torque value and motor details during tender p articipation and along with material supply.2) Only Authorized dealers or Manufactures of above mentioned makes shall participate in tender.3) Drawing of model no- SK 42125-132SP/4 TF is attached for reference o nly. [ Warranty Period: 18 Months after the date of delivery ] ]
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
