|
| 1 | Labour for boring tube well of required dia by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting & fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore. a) For depth upto 150m for 50mm dia tube well with top enlargement of 100mm dia. i) 50mm dia boring etc. PWD Schedule Item no-01(d/i), Pg-49 |
| 2 | ii) 100mm dia boring etc. top enlargement. PWD Schedule Item no-01(d/ii), Pg-49 |
| 3 | Supply of PVC pipes & fittings Schedule 80(medium duty) conforming to ASTMD - 1785 & threaded to match with GI pipes as per IS:1239 (PART - I) PVC pipes i) 50mm dia PWD Schedule Item no-19(III), Pg-13 |
| 4 | ii) 100mm dia PWD Schedule Item no-19(III), Pg-14 |
| 5 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. (50 mm dia). PWD Schedule Item no-06, Pg-52 |
| 6 | Supplying fitting & fixing steel cutter piece up to 450mm long with socket 50mm dia. PWD Schedule Item no-09, Pg-53 |
| 7 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution at work including hire and labour charges for tools and plants and sterilizing the equipment, paying all charges and fees, testing etc. complete in all respect as per direction. PWD Schedule Item no-23, Pg-55 |
| 8 | Supplying fitting & fixing 300mm housing clamp of approved quality. PWD Schedule Item no-27, Pg-56 |
| 9 | Providing 200 mm centre guide. i) With Clamp PWD Schedule Item no-28, Pg-56 |
| 10 | Washing & developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with ‘V’ notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect. PWD Schedule Item no-20, Pg-55 |
| 11 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete. (Note: Initial 6 M of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with surface water). PWD Schedule Item no-24, Pg-55 |
| 12 | Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. PWD Schedule Item no-22, Pg-55 |
| 13 | Supplying, fitting and fixing heavy type bell mouth reducing socket.(i) 100mmx50mm PWD Schedule Item no-17, Pg-54 |
| 14 | Supplying, fitting and fixing G.I. cap at top. 100 mm PWD Schedule Item no-18, Pg-54 |
| 15 | Supplying fittings fixing submersible cable Finolex make I.S.I. size: 2.5sqmm Ref: PO. No: 5300307819 |
| 16 | Supplying fittings & fixing KSB,Crompton Greaves or equivelent make submersible pump and motor set 1.5HP, with all necessary arrangements including loading unloading, transportation as per direction of engineer-in-charge (Payment will be made only after satisfactory performance of the pump & motor set for supply of water) Market Rate |
| 17 | Supply & installation charges of control panel size 350x300x150mm complete with L&T make connectors 16 Amps. M.No. 2 over load relay with single phase preventor off and on switch, 3 nos. line fuse,3nos. Indicator lamps, volt meter, Push button, selector, switch Amp. meter with complete with all insurance Tax and duties etc. Market Rate |
| 18 | Supplying, fitting & fixing G.I. pipes TATA make with all necessary accessories, specials viz. socket, bend tee union cross,elbow, nipple,long screw, reducing socket,reducing tee, short piece etc. fitted with holder bats clamps including cutting pipes, making threads fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. For exposed work. i) 100mm dia. medium quality. PWD Schedule Item no-01A/i(i), Pg-01 |
| 19 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Exposed Work. 40mm dia PWD Schedule Item no-19(I), Pg-12 |
| 20 | 25mm dia PWD Schedule Item no-19(I), Pg-12 |
| 21 | 20mm dia PWD Schedule Item no-19(I), Pg-12 |
| 22 | 15mm dia PWD Schedule Item no-19(I), Pg-12 |
| 23 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only) 40mm PWD Schedule Item no-05, Pg-05 |
| 24 | Supply, fitting and fixing bib cock or stop cock. i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model – Tropical/ Sumthing Special of ESSCO or similar brand). PWD Schedule Item no-07(a/i), Pg-06, S&P |
| 25 | ii) Chromium plated Stop Cock (Equivalent to Code No. 513 (A) & 513 (B) & Model – Tropical/ Sumthing Special of ESSCO or similar brand). PWD Schedule Item no-07(b/i), Pg-06, S&P |
| 26 | Supply, fitting and fixing approved brand P.V.C CONNECTOR white flexible, with both ends coupling with heavy brass C.P nut, 15 mm dia. 750 mm long PWD Schedule Item no-09(iv), Pg-43, S&P |
| 27 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 1000 litre capacity PWD Schedule Item no-06(b), Pg-37, SP |
| 28 | Labour for hoisting Plastic water storage tank. Up to 1500 litre capacity. Upto 3rd story from G.L. PWD Schedule Item no-10(a), Pg-37, SP |
| 29 | Labour for punching hole in plastic water storage tank up to 50 mm dia. PWD Schedule Item no-13, Pg-38, SP |
| 30 | Supply, fitting and fixing approved brand 32 mm dia. P.V.C waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long. PWD Schedule Item no-10(iii), Pg-43, S&P |
| 31 | Supplying, fitting & fixing Flat back Urinal (half stall in urinal) in white vitreous china ware of approved make in position with brass screws on 75 mm x 75mm x 75mm. wooden blocks complete. 635mm x 395mm x420mm. PWD Schedule Item no-6(ii), Pg-80, S&P |
| 32 | Supplying, fitting & fixing 32 mm dia. flush pipe of approved make necessary fixing materials and clamps complete. Polythene Flush Pipe. PWD Schedule Item no-11(i), Pg-81, S&P |
| 33 | Supplying, fitting & fixing beveled edged mirror 5.5 mm thick silver red as per I.S. 3438-1965 together with brass C.P hinges. 600mm. x 450mm. PWD Schedule Item no-15(ii), Pg-81, S&P |
| 34 | Supplying, fitting and fixing soap holder. Fibre glass. PWD Schedule Item no-18(b), Pg-82, S&P |
| 35 | Supplying, fitting & fixing towel rail with two brackets. CP Over brass. 25 mm dia & 600 mm long. PWD Schedule Item no-22(a/ii), Pg-82, S&P |
| 36 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm PWD Schedule Item no. 04 Pg-79 |
| 37 | Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap 100 mm PWD Schedule Item no. 14(A/iii) Pg-66 |
| 38 | Supplying, fitting & fixing 10 litre PVC lowdown cistern conforming to IS: specification with PVC fittings complete with C.I. brackets including two coats of painting to bracket etc. PWD Schedule Item no-02, Pg-36, S&P |
| 39 | PlumbingMistry PWD Schedule Sl no-01, Pg-113, S&P |
| 40 | PlumbingHelper PWD Schedule Sl no-05, Pg-113, S&P |
| 41 | Dismantling all types of plain cement concrete works, stacking serceable materials at site and removing rubbish as directed within a lead of 75m.In ground floor including roof. Upto 150mm thick. Item no-01, Pg-1 |
| 42 | Dismantling all types of masonary excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. In ground floor, including roof Item no-01, Pg-1 |
| 43 | Ordinary Cement Concrete (mix 1: 2: 4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur variety. Analysed Rate |
| 44 | Plaster (to wall, floor, ceiling etc.) with sand & cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/ staging where necessary. (Ground floor) (Excluding cost of chipping over concrete surface): 15 mm thick plaster with (1:6) cement mortar. 3rd Corri, Item no-01(i/c), Pg-50 |
| 45 | Supply of labour Mazdoor(male) for cleaning of site as per the direction of the E-in-Charge. Please Enable Macros to View BoQ information |
