|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | (b) Depth of excavation exceeding 1,500 mm and up to 3000mm but not requiring shoring. |
| 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation. |
| 4 | Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidatingthe same by ramming and dressing complete.(Payment will be made on profile measurement before and after the work)(a) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth. |
| 5 | (b) With carried earth arranged by the contractorwithin a radius exceeding 5 km. but not exceeding 10km. including cost of carried earth. |
| 6 | Filling in foundation or plinth by Medium coarse sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity). |
| 7 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 8 | Cement concrete with graded stone ballast (40 mm size excluding shuttering). In ground floor and foundation.(A) Pakur Variety. (a) 6:3:1 proportion |
| 9 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).i) In ground floor. (a)Steel shuttering or 9 to 12 mm thick approved quality ply board shutteringin any concrete work |
| 10 | (b) 25mm. to 30 mm. shuttering without staging in foundation etc. |
| 11 | (c) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 12 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bennding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor / upto 4m. (i) Tor steel/Mild steel SAIL/TATA/RINL In Ground Floor and Foundation. |
| 13 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm.nominalsize) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.a) Pakur Variety. |
| 14 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips(20 mm.nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.a) Pakur Variety i) In ground floor. & foundation |
| 15 | Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth |
| 16 | (b) In superstructure, ground floor |
| 17 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. In super structure ground floor. |
| 18 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 19 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Exxcluding cost of chipping over concrete surface.] (i) With 1:6 cement mortar (A) 15 mm. thick plaster. (a)In ground floor |
| 20 | (B) 20 mm. thick plaster (a)In ground floor |
| 21 | (ii) With 1:4 cement mortar (A) 10 mm. thick plaster For Ceiling Works. (a)In ground floor |
| 22 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 23 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE: Cement 0.152 cu.m. per sq.m. |
| 24 | Artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement.Using grey cement. (i) 35 mm. thick (In ground floor only) |
| 25 | Extra cost of labour over grey artificial stone for Chequering |
| 26 | Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) |
| 27 | Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Acrylic Emulsion.(Two Coat), Normal. (i)In ground floor. |
| 28 | Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concretesurface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior Immersion paint including scrapping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of E.I.C One coat on new surface. (i)In ground floor. |
| 29 | (a)Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 30 | (b)Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 31 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (a) On timber or plastered surface : With super gloss (hi-gloss) - Two coats (with any shade except white) |
| 32 | (b) On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white) |
| 33 | Supplying fitting & fixing UPVC Pipes A type and fitttings conforming to IS 13592-1992 with all necessary clamps, nails including making holes in walls, floors etc cutting trenches in any soil through masonary concrete structures etc, if necessary, and mending good damages including joining with jointing materials (Spun yarn, valamoid / bitumen/ M-Seal, etc.) complete. A.) UPVC Pipes 110 mm |
| 34 | B) Plain Tee (UPVC), 110mm dia. |
| 35 | C) UPVC Shoe, 110mm dia. |
| 36 | MS work in cable trench, cover slab, chaquered plate, clamp, cleats, brackets, etc. made from flat angle channel, tees, chequered plates 6mm thick, etc including necessary cuting to size fabricating, drilling of holes, forgeing, welding, revating, tightening with bolts and nuts with necessary washers including errection, fitting and fixing in position with all labour and materials, complete as per drawing and direction. |
| 37 | Clearing compound premises from shurbs, plants, jungles, etc. by cutting and removing as directed. |
| 38 | Supplying and laying Polythene sheet (150gm /sq.m.) over damp proof course or bellow flooring or roof terracing or in foundation or foundation trenches. |
| 39 | 25mm thick damp proof with cement concrete (1:1.5 :3) (with graded stone agreegate 10mm nominal size) and painting the top surface with a coat of bitumen [VG.40] using 1.7KG per sqm. Including heating the bitumen and cost and carriage of all materials complete. Bitumen to be supplied by the agency. |
| 40 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominalsize) excluding shuttering and reinforcement,if any, in gound floor as perrelevant IS codes. Pakur variety |
| 41 | Removing corroded worn out portion of reinforcement (when the area of bar is damaged by more than 25%) by cutting and replacing the same by a new plain round bar of requisite diameter by binding with required lap / welding with old bar, including cost of reinforcement, complete in all respect including removing unserviceable materials from site as per direction of the Engineer - in - charge. Note : Payment on weight (Kg.) of new reinforcement. |
| 42 | Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer'sspecification. |
| 43 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. |
| 44 | Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosionof reinforcement as per manufacturer's specification] [Mode of measurement:The affected surface area of reinforcement shall be considered for payment] |
| 45 | Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.) |
| 46 | Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary. |
| 47 | Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete.(i) 12 mm. dia. (a) 300 mm. |
| 48 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. including handling charges of materials for the work complete. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc.and no seperate payment being made for these items, as per direction of Engineer In Charge. For structural members of specified sections weighing less than 22.5 Kg./m |
| 49 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in avement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. (i) 60 mm thick interlocking designer concrete paver block M- 35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course &250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) (a) Grey |
| 50 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yieldstrength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:- a) With 0.5 mm thick sheet |
| 51 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.. |
| 52 | Supplying, fitting, fixing G.I chain link fencing 75 mm x 75 mm mesh 12 g wire to the R.C.C or wooden posts with galvanised hooks or staples etc. complete as pe direction. |
| 53 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within alead of 75m as directed. |
| 54 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. |
| 55 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.In ground floor including roof. a) upto 150 mm. Thick |
| 56 | Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof. |
| 57 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive distemper / acrylic emulsion paint including scrapping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of E.I.C One coat. i) Water based interior grade Acrylic Primer |
| 58 | Applying Acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermidiate course including putty (two coats). Standard Quality. |
| 59 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick). |
| 60 | i) Supplying fitting & fixing UPVC Pipes A type and fitttings conforming to IS 13592-1992 with all necessary clamps, nails including making holes in walls, floors etc cutting trenches in any soil through masonary concrete structures etc, if necessary, and mending good damages including joining with jointing materials (Spun yarn, valamoid / bitumen/ M-Seal, etc.) complete. A.) UPVC Pipes 110 mm |
| 61 | B) Plain Tee (UPVC), 110mm dia. |
| 62 | C) UPVC Shoe, 110mm dia. |
| 63 | D) Bend 87.5 degree, 110 mm dia. |
| 64 | E) Plain Y , 110 mm. Dia. |
| 65 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Single Socketed 3 Meter Length. 110 mm |
| 66 | Supplying approved quality best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. 3mm thick (weighing 7.4 Kg/ sqm). |
| 67 | Extra for fixing glass panes in steel window. |
| 68 | Supplying best Indian figured glass viz. hammered, fluted, ribbed, pinhead etc. type including cutting to required sizes, setting on putty bases and fitted and fixed with nails and putty complete.(In all floors for internal wall & upto 6 m height for external wall) 3 mm thick (White) |
| 69 | (A)Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)For exposed worki) 32 mm dia |
| 70 | (ii) 25 mm dia |
| 71 | (iii) 20 mm dia |
| 72 | (iv) 15 mm dia |
| 73 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only) i) 25 mm. dia. |
| 74 | Supplying, fitting and fixing bib cock or stop cock. a) Chromium plated concealed Stop cock [Equivalent to Code No.514(A) & Model - Tropical/Sumthing of ESSCO or similar brand] |
| 75 | b).Chromium plated Bib Cock Short body [Equivalent to Code No.511 & Model - Tropical/Sumthing special of ESSCO or similar brand] |
| 76 | c)Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand). |
| 77 | (d)PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm |
| 78 | Supplying, fitting and fixing shower of approved brand and make.(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 79 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 1000 litre capacity. |
| 80 | Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L. |
| 81 | (b) Extra for each additional story |
| 82 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 83 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specificatioons with P.V.C. fittings completre, C.i. brackets including two coats of painting to bracket etc. |
| 84 | Supplying, fitting and fixing white vitreous china best quality approved make Wash basin with C.I. brackets on 75mm X 75mm X 75mm. Wooden blocks, C.P. waste fittings of 32 mm dia, one approved quality brass C.P. pillar cock of 15mm dia, C.P. chain with rubber plug of 30 mm dia, approved quality P.V.C waste pipe with C.P. nut 32mm dia, 900 mm long approved quality P.V.C connection with heavey brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm. |
| 85 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of CI brackets. 530 mm. X 430 mm. X 180 mm. |
| 86 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap |
| 87 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.750 mm long |
| 88 | Supplying, fitting and fixing towel rail with two brackets. C.P. over brass 25 mm. dia. and 450 mm. long. |
| 89 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 600 mm long |
| 90 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in whitevitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete.470 mm X 280 mm X 340 mm |
| 91 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm X 300 mm |
| 92 | Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 93 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe |
| 94 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C.(i) Plastic (hallow type) black |
| 95 | Supplying, fitting and fixing approved patent vent cowl I.C.I. conforming to I.S.S. and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). 100 mm. dia. |
| 96 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.Upto 30 users:-(i) Within a lead of 150 metre |
| 97 | Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. |
| 98 | Supplying fitting & fixing 1st quality Ceramic Tiles in walls & floors to match with the existing works and four no of key stones (10mm) fixed with araldite at the back of each tiles and finishing the joints with white cements mixed with colouring oxide if required, to match the colour of tiles including roughening of concrete surface , if necessary, or by synthetic adhesive and grout materials etc. (A) Floor :-With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative a)In ground floor |
| 99 | (B) Wall :- With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative a)In ground floor |
| 100 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).a) In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N.a)In ground floor |
| 101 | Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and forjointing @1.8 kg/Sq.m] |
| 102 | Supplying fitting and fixing in position approved P.V.C. door frame(matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x2 mm. (+ - 0.2 mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials taxes and all other incidental charges complete. |
| 103 | PVC Door Shutter - 30 mm thick. Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm.x 30 mm. section with 2.0 mm.(+ - 0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each othe by self tapping screws and one solid polymeric/M.S. galvanised tubular L-shaped bracket 10 mm.X 200 mm. in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm. X 30 mm. with2.0 mm.(+ -0.2 mm.) wall thickness will be placed in the middle, reinforced by solid polymer bar of 200 mm. long at both ends and screws ftrom both sides as lock rail.the section frame will then be fitted in by PVC panels of size 100 mm.X 25 mm. with wall thickness 1.2 mm.(+ -0.2 mm.) and 2 nos. of 6 mm.bright rod will be inserted horizontally with both side check and nut system and streches where fixing of hinges /hasp bolt/tower bolt/door ring are required to be strong enough to with stand wear and tear. Please Enable Macros to View BoQ information |
