|
| 1 | REPAIRS TO ALMIRAH STEEL LARGE WITH SHELF/ALMIRAH STEEL 1/2HX1/2S AND ALMIRAH MEDIUM [DRG NO: [FD-67M, 1031, FD/E6/MAP/18 & ,1032 ) ] |
| 2 | Material and labour for removing old unserviceable existing handle and Supply and fix new chromium plated handles including necessary nut, bolts, washer etc for Almirah Large Steel/ Almirah Medium Steel. |
| 3 | Material and labour for removing unserviceable lock from Almirah Medium Steel/ Almirah Large Steel and Supply and fix new 6 lever brass lock with duplicate keys complete all as specified. |
| 4 | Material and labour for removing existing shelves and making the same in functioning condition including necessary nuts, bolts, clits and washer etc of Almirah Large Steel/ Almirah Medium Steel all as directed. |
| 5 | Material and labour for removing existing locking device with MS plate, rod of Almirah Large Steel and Supply and fix new locking device with plate, rod complete all as directed. |
| 6 | All as per item No 1.04 here-in-above but of Almirah medium steel. |
| 7 | Preparation of old painted surfaces of Almirah large steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even Thereafter applying one coat of red oxide primer and applying one coat synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing. |
| 8 | All as per item No 1.06 here-in-above but for Almirah medium steel. |
| 9 | All as per item No 1.06 here-in-above but for Almirah large steel1/2 Hx1/2S |
| 10 | Material and labour for removing old unserviceable leg of Almirah Large Steel/ Almirah Medium Steel and Supply and fix new legs made out of 1mm MS sheet made to shape and sizes as shown on drawing and directed. |
| 11 | REPAIRS TO Bed Hard Steel, Charpoy IP Hard Top, Charpoy Folding Hard Top { Drg No. FD/E6/MAP/08, FD/MAP-II/01, FD-388 ( R) } |
| 12 | Material and labour for removing of old unserviceable ply wood of Bed Hard Steel and Supply and fix new BWR grade, phenol bounded, commercial plywood with the help of nut, bolts including suitable washer as per drg and directed. Drg- FD/E6/MAP/08 |
| 13 | All as per Serial Item No. 2.01 above but Charpoy IP hardtop.FD/MAP-II/01 |
| 14 | All as per Serial Item No. 2.01 above but Charpoy Folding with Hard Top.FD-388 (R) |
| 15 | Supply and fix in replacement pre laminated particle board from the Head Rest and Foot Rest assembly of Bed Hard Steel. FD/E6/MAP/08 |
| 16 | Material and labour for welding all around the broken joints of all type of steel furniture and filling properly at places of welding point throughout to match with the existing as directed.Note: One broken point shall be measured as one point i.e. one unit. |
| 17 | Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint black colour with spray gun or by manual brush and roller in appropriate shade complete all as per requirement |
| 18 | All as per Serial Item No. 2.06 above but Charpoy IP hardtop.FD/MAP-II/01 |
| 19 | All as per Serial Item No. 2.06 above but Charpoy Folding with Hard Top.FD-388 (R) |
| 20 | Supply and fix PVC/Rubber shoe of Bed hard steel as per drg FD/E6/MAP/08. Note- Four pieces will be measured as one unit |
| 21 | Supply and fix PVC/Rubber shoe of Charpoy IP hard top as per drg FD/MAP-II/01.Note- Four pieces will be measured as one unit |
| 22 | Supply and fix PVC/Rubber shoe of Charpoy IP folding as per drg FD-388 (R) Note- Six pieces will be measured as one unit |
| 23 | REPAIRS TO CHAIR VERANDAHFD-359 & 256 |
| 24 | Material and labour for removing old unserviceable plastic cane of Chair Varandah and reweaving of Chair Verandah seat & back with new plastic cane ½ round, 4mm wide, 0.40mm thick with approved quality closely woven as per drg. (Drg No. FD-359) |
| 25 | Material and labour for removing of old broken PVC seat back set and Supply and fix new PVC Seat Back set from chair varandah (FD/E6/Map/15) |
| 26 | Material and labour for scrapping the old paint and apply one coats of synthetic enamel paint white colour as specified and directed |
| 27 | S & F new PVC shoes for chair verandah inclidung taking down old shoes complete all as specified and shown on Drg. Note- Four pieces will be measured as one unit |
| 28 | REPAIRS TO CHARPOY GI PIPE PLYWOOD TOP FD-220 |
| 29 | Removing the existing unserviceable ply wood from GI charpoy and supply & fix 12mm thick plywood, BWR grade, ISI marked alongwith two flat iron stiffeners 900x25x5mm with 08 Nos Nut Bolt complete all as specified and directed.Make : Greenply Industries Ltd (Ply & Board Division) / Kitply / Century / Archidply |
| 30 | Removing the existing unserviceable / broken long rail 32mm dia and supplying and fixing new long rail for charpoy GI Pipe 32 mm |
| 31 | Preparing short rail from broken long rail obtained from Sl item No 4.02 above and fixing for charpoy GI pipe complete all as specified and shown on drawing including removing the existing broken/ unserviceable short rail . |
| 32 | Preparing leg of GI Charpoy made from old short rail obtained from item No 4.03 above and welding 3mm thick base plate to the bottom of the leg and preparing MNF clamp holes as per existing and all as specified |
| 33 | Supply and fixing GI 3 way elbow 32mm bore,ISI marked, length not less than 65mm in each way including dismantling of old GI elbow. |
| 34 | Supply and fixing GI checknut, 5mm thick suitable for 32mm GI pipe pe including dismantling of unserviceable checknut. |
| 35 | CHAIR CB STEEL WITH ARMS FD-75M |
| 36 | Removing the existing unserviceable/ broken seat for chair CB steel with arms and supply and fix new Seat frame made out of 50 X 50 mm 1st class hard wood members duly painted with black paint & canned with 2 mm wide plastic cane of oval shaped & 4 mm wide plastic cane for borders in Godrej pattern complete all as specified and shown on drg including fench polishing to wooden surfaces all as directed. |
| 37 | All as per item No 5.01 above but for back of chair CB steel with Arms |
| 38 | Removing the existing unserviceable/ broken Arms rest for chair CB steel with arms and supply and fix new Arms rest of size 420 X 50 X 20mm 1st class hard wood duly painted in black colour paint made to complete all as specified & shown on drg including french polishing to exposed surfaces all as directed. (Each Arms rest measured separately) |
| 39 | Supply and fix MS plate of size 50mm X 20mm X 4 mm thick duly welded and painted on two seat pipe to support seat of chair CB steel all as specified and directed. |
| 40 | Preparation of steel surfaces of chair CB steel with arms and applying one coat of synthetic enamel paint of approved colour complete all as directed |
| 41 | Material and labour for supply and fixing Rubber or PVC Caps/shoe in tubes of Chair CB steel with Arms and Chair CB steel without Arms as per drg and directed. (Drg No. FD-75M) |
| 42 | REPAIRS TO CHAIR WRITING OFFICERSFD/E6/MAP/12 |
| 43 | Removing the existing unsv PU arm rest and Supply and Fix in repairs new PU armrest of best quality of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane 76-85 shore ‘A’ Hardness. Pair of two will measure as one unit. |
| 44 | Removing unsv Seat of chair writing and Supply and Fix new Seat 75mm thick polyurethane foam(PU) moulded with density 50-55kg per cubic mtr thick and hardness duly covered with tapesry cloth not less than 200/- per RM all as specified and directed. |
| 45 | All as per item No 7.02 above but back of chair writing |
| 46 | Material and labour spot welding of broken base steel support to the chair frame finishing in standard workmanship |
| 47 | Supply and fix new shoes of chair including painting of metal portion all as specified and directed. All shoe fixed in one chair will be measured as one unit |
| 48 | LOCKERS STEEL BED SIDE FD-1029 |
| 49 | Removing the existing unserviceable handle of locker bedside & Supply and fix new 100 mm long Handle all as specified & shown on drg. |
| 50 | Removing the existing unserviceable hasp & staples & Supply and fix new mild steel 100 mm long hasp & staples all as specified & shown on drg. |
| 51 | Preparation of old painted surfaces of locker steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even. Thereafter applying one coat of red oxide primer and applying one coat synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing. |
| 52 | Supply and fix new legs of locker steel made of 1.6 mm thick MS sheet bend to shape duly painted with one coat of Red oxide primer and fix with Gas welding as shown on drg including removing of unserviceable legs complete all as directed. |
| 53 | Removing unsv conduit pipe and supplying and fixing new chromium plated 20mm dia conduit pipe of 1.6mm thick wall thickness |
| 54 | Removing unsv hinges and Supplying and fixing new hinges to shutters by reveting or gas welding as per existing |
| 55 | TABLE DINING ORs STEEL FD-165M |
| 56 | Preparation of surface by scrapping the old paint and painting of complete M.S frame with synthetic enamelled paint of black/OG colour over coat of red oxide primer |
| 57 | Removal of u/s Top of table and supply and fixing new top of size 1800x600x18mm made out of Block board/ plywood 18mm covered from all side with Aluminium sheet 22 gauge thick covered alround. Top fixed with steel screw of required size complete all as directed. |
| 58 | Removal of u/s PVC shoes and Supply and fix new PVC shoes suitable for MS pipe 25mm square complete all as directed. |
| 59 | Repairs to Table Steel |
| 60 | Material and labour for removing old unserviceable lock of drawers of Table office clerk steel/ Table 3'x2' with drawer and Supply and fix new brass lock with four levers and duplicate keys. (Drg No. FD-1008,1004,1003) |
| 61 | Material and labour for removing existing drawers of Table office officer steel/ Table office clerk steel/ Table 3' x 2' steel and re-fixing the same after necessary setting of drawers for free movement all as directed. (Drg No. FD-1004, 1003, 1008) |
| 62 | Material and labour for removnig old unserviceable drawers of table 3' x 2' steel with drawer/ Table office officer steel/ Table office clerk steel and Supply and fix new drawers made out of 1.00mm MS sheet made to shape and sizes shown on drawing all as directed. (Drg No. FD-1004, 1003, 1008) |
| 63 | Material and labour for removing existing unserviceable legs of table and Supply and fix new legs of table made out of 1.6mm wall thickness, MS pipe of size 760 x 25 x25mm with welding and painting neatly including two coat of synthetic enamel paint of the same shade to match with the existing as per drg. (Drg No. FD-1003, 1004, 1007 to 1008) |
| 64 | Material and labour for taking out unserviceable Key board tray from Computer Table and Supply and fix new Key board tray with side supports and channel with the help of L shape patti (400 x 500) on both side, made of 18 mm thick pre laminated partical board including teak wood edging 4mm, duly polished as specified in drg. (Drg No. TP, FD/E6/Map/03). |
| 65 | Material and labour for taking out old unserviceable seat plank of Form without back and Supply and fix new plank of size 1525x255x25mm made of 2nd class hard wood in one piece, duly wrought upper side including edges, cleaning the other face and bottom fix with MS nut and washer as shown on drawing & directed. (Drg No. FD-77) |
| 66 | Supply and fix PVC/Rubber shoe of Tables as per drg (Drg No. FD-1003, 1004, 1007 to 1008) |
| 67 | Supply and fix PVC handles with inner plate and washer in drawer of office tables (Drg No. FD-1004, 1003, 1008) |
| 68 | Material and labour for removing unserviceable top of Table office clerk steel and Supply and fix new top made out of 18mm thick particle board exterier grade with both side laminated sheet including plain/half round 4mm thick teak wood edging all around the top duly polished with the help of necessary screw, nut, bolts complete all as specified on drawing and directed. (Drg No. FD -1004) |
| 69 | All as per Item No. 4.01 above but Table of size 3’x2’ with or without drawer. (Drg No. FD-1007, FD-1008) |
| 70 | All as per Item No. 4.01 above but Teapoy Verandah (Drg No. FD-255,383) |
| 71 | All as per Item No. 4.01 above but Table 900mm x 900mm steel (Drg No. FD-1009) |
| 72 | All as per Item No. 4.01 above but Table computer (Drg No. TP, FD/E6/Map/03, TP) |
| 73 | Preparing steel surface of table office clerk steel by scrapping old paint and applying one coat of synthetic enamel paint by spray painting complete all as specified & shown on drg. |
| 74 | All as per Item No. 4.01 above but Table of size 3’x2’ with or without drawer. (Drg No. FD-1007, FD-1008) |
| 75 | All as per Item No. 4.01 above but Teapoy Verandah (Drg No. FD-255,383) |
| 76 | All as per Item No. 4.01 above but Table 900mm x 900mm steel (Drg No. FD-1009) |
| 77 | All as per Item No. 4.01 above but Table computer (Drg No. TP, FD/E6/Map/03, TP) |
| 78 | Table Bed side (FD/E6/MAP/15R) |
| 79 | Removing the existing unserviceable top & supply & fix 18 mm thick pre-laminated particle Board exterior grade of size 450mmx450mm with 6 mm thick teakwood edging all round & treated with French polishing including welding to repairable frames complete all as shown on drgs. |
| 80 | Preparing old painted steel surfaces of frame & apply one coat of black synthetic enamel paint including removing the unsv rubber shoes and supply and fixing new of same size rubber shoes all as specified and directed. |
| 81 | Removing unsv Telescopic channel and supply and fix new telescopic channel 300mm long in any large or small drawers of table bed side all as specified and directed. |
| 82 | Chair school with Hand Board (FD/E6/MAP/15R) |
| 83 | Removing the existing unserviceable openable top & supply & fix 18 mm thick pre-laminated particle Board exterior grade with PVC edging(hinged on RHS) screwed to 25 mm thick hollow pipe inserted in 20 mm thick MS rod welded to frame including welding complete all as shown on drgs. |
| 84 | Removing the old welding spots from broken welding joints and re-welding in the same place as required.Preparing old painted steel surfaces of frame & apply one coat of red oxide primer and painting the steel portion with black synthetic enamel paint all as specified and shown on drg. |
| 85 | Removing unsv one piece back & seat and supply and fixing of make Blowplast or equivalent all as specified and shown on drg. |
| 86 | Repair to Chair computer (FD/E6/MAP/01,TP) |
| 87 | Material and labour for taking out old unserviceable Seat and Supply and fix new seat made of 12mm thick teak ply with poly urethane foam of 50mm thick moulded with density 40 Kgs per cum duly covered with tapestry cloth not less than 250/- per meter of approved colour and shade including black PVC beeding and necessary nut, bolts and washer. All as per drg and directed. |
| 88 | All as per item 3.01 above but back of chair computer. All as per drg and directed. |
| 89 | Removing of unsv pedestial base assy of chair computer and S & F of new pedestial assy of 600mm pitch centre dia duly fixed with all castor as per drg and directed. |
| 90 | Removing unserviceable hydaulic assy and S & F new hydraulic assy of appropriate size with Black PVC couplings of chair computer complete all as specified and directed. |
| 91 | Material and labour for removing unsv base plate and Supply and fix new base plate of best Quality with screw/nut/bolts. All as per drg and directed |
| 92 | Material and labour for taking out old unserviceable PU handle of Chair computer and Supply and fix new pair of PU handles (left and right) with screw, Nut and bolts as per drg. (Drg No. FD/E6/ MAP/01)Note: Pair of 2 handles will be counted as one unit. |
| 93 | Material and labour for removing old unserviceable Castor from the Chair Computer Revolving and Supply and fix new castors as per drg and directed. (Drg No. FD/E6/ MAP/01) |
| 94 | Book Case Steel (Drg No. FD-1028) |
| 95 | Material and labour for taking out old unserviceable handle of Book Case Steel and Supply and fix new chromium plated handles including necessary nut, bolts, washer etc. |
| 96 | Material and labour for taking out existing shelves of Book Case Steel and making the same in functioning condition including necessary nuts, bolts, clits, clips and washer etc all as directed. |
| 97 | Material and labour for taking out old unserviceable glass of Book Case Steel and Supply and fix new 3mm plain glass including supporting MS plate with screw, nut and bolts. The shape and sizes of glass are all as per drawing and as directed. |
| 98 | Material and labour for removing unserviceable locks of Book Case Steel and Supply and fix new lock set (04 Nos of lock with two keys only) as per drawing and directed. Please Enable Macros to View BoQ information |
