Tender For Construction Of Lift Irrigation From Haharo River In Koylang Parewatri, Block - Barkagaon, District - Hazaribag
Tender Value
94.10 Lakhs
Estimated cost
Bid Submission
26 May 2026
0 days left
EMD
1.88 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barkagaon → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Lift Irrigation From Haharo River In Koylang Parewatri, Block - Barkagaon, District - Hazaribag
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50m. Including all lifts, levellings, ramming the foundation trenches, removing roots of trees,shrubs all complete job as per approved design, building specification and direction of E/I. (5.1.1) BCD |
| 2 | Extra for earth work in hard soil as per specification and direction of E/I.(vide classification of soil item-B) (5.1.2) BCD |
| 3 | Providing clean coarse sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials,labour,royalty and taxes all complete job as per building specification and direction of E/I. (Mode of measurement compacted volume).(5.1.10 BCD) |
| 4 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete job as per building specification and direction of E/I. (5.6.1. BCD) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (5.3.1.2) BCD |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) (5.3.1.5) BCD |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete. 5.3.17.1 BCD |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (5.3.9.1) BCDTie Beam |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) (5.3.10) BCDIn Column |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (5.3.11) BCDIn Lintel |
| 11 | Providing 75A brick work in C.M. (1:6) in Foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints,cost of screening materials, raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I. (5.2.3) BCD |
| 12 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). (5.3.5) BCD |
| 13 | Providing 75A brick work in C.M. (1:4) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints,cost of screening materials, scaffolding, raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I. (5.2.10) BCD |
| 14 | Supplying, fitting and fixing 20 gauge G.C.I Sheet gate fitted on M.S Angle frame of size 60x60x6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a primimg red paint oversteel work, taxes all complete as per building specification and direction of E/I.(5.5.29) BCD |
| 15 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat/square bar as per approved design and drawing, properly frabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (5.5.12) BCD |
| 16 | Providing Tor steel Reinforcement of 8 mm dia rods as per approved design and drawing with cutting, bending, binding with annealed wire with cost of wire removal of rust, placing the rods in position (including carriage of bars to work site)all complete job per building specification and direction of E/I.TMT Fe 500{only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} (5.5.4 BCD) |
| 17 | Providing Tor steel Reinforcement of 10mm, 12mm & 16 mm dia rods as per approved design and drawing with cutting, bending, binding with annealed wire with cost of wire removal of rust, placing the rods in position (including carriage of bars to work site)all complete job per building specification and direction of E/I.(a) 10 mm TMT coil Fe 500{only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} (5.5.5 (a) BCD) |
| 18 | Providing Tor steel Reinforcement of 10mm, 12mm & 16 mm dia rods as per approved design and drawing with cutting, bending, binding with annealed wire with cost of wire removal of rust, placing the rods in position (including carriage of bars to work site)all complete job per building specification and direction of E/I.(c) 16 mm TMT coil Fe 500{only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} (5.5.5 (c) BCD) |
| 19 | Providing 6mm thick C.P. (1:4) in ceiling with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (5.7.6) BCD |
| 20 | Providing 12mm thick C.P. (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.(5.7.3) BCD |
| 21 | Providing 12mm thick C.P. (1:3) with clean coarse sandof F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (5.7.1) BCD |
| 22 | Providing 12mm thick C.P. (1:4) with clean coarse sandof F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (5.7.2) BCD |
| 23 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes allcomplete as per building specification and direction of E/I. (5.8.24) BCD |
| 24 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, sirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.(5.8.41) BCD (Mode of measurement Area shall be multiplied by the coefficient as indicated in building specification). |
| 25 | Providing two coats of painting with ready mixed paint of approved shade and make over new steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per building specification and direction of E/I. (5.8.43) BCD |
| 26 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with verticle double channels 20 x 10 x 2mm at 100mm. Centres and braced with M.S flat diagonals 20X3 mm, with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage, hoisting and taxes all complete job as per building specification and direction of E/I.(5:5:14) BCD |
| 27 | Supplying and laying boulder in rock toe in trenches of the dam as per design, drawing including the cost of materials royalty and taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/l. ( 6.4 Common Part A ) |
| 28 | Providing shuttering including strutting, propping etc. and its removal after use in foundation as per specification and direction of E/I.(5:3:17) WRD |
| 29 | Providing shuttering including strutting, propping etc. and its removal after use in super structure portion of various components od dam work as per specification and direction of E/l.(5.3.18) WRD |
| 30 | Providing 1.5 mm thick neat cement punning including curing, scaffolding, royalty and all taxes etc. complete job as per specification and direcition of E/l. (5.7.11)BCD |
| 31 | Supplying labour and equipment for digging well (vide classification of soil item-A) including removing the spoils to a safe distance upto 50m from the edge of the well all complete Job as per specificition and direction of E/l.(A) E/W upto 3meters depth below G.L(3.1.64) PHED |
| 32 | Extra for earth work in each additional lift of 1M over the initial lift of 3 meters all complete Job as per specificition and direction of E/l.(3.1.64) PHED 3M to 4M |
| 33 | Extra for earth work in each additional lift of 1M over the initial lift of 3 meters all complete Job as per specificition and direction of E/l.(3.1.64) PHED 4M to 5M |
| 34 | Extra for earth work in each additional lift of 1M over the initial lift of 3 meters all complete Job as per specificition and direction of E/l.(3.1.64) PHED 5M To 6M |
| 35 | Extra for earth work in each additional lift of 1M over the initial lift of 3 meters all complete Job as per specificition and direction of E/l.(3.1.64) PHED 6M to 7 M |
| 36 | Extra for earth work in each additional lift of 1M over the initial lift of 3 meters all complete Job as per specificition and direction of E/l.(3.1.64) PHED 7M to 7.5 M |
| 37 | E/W in filling in foundation trenches or back filling of massonary structure with suitable earth in layers not exceeding 150mm thick well watered , rammed and fully compacted and finally dressed with earth obtained from excavation of foundation trenches and kept at a lead of 30m and initial lift of 5m complete job as per specification and direction of E/I.(6.1.16) WRD |
| 38 | Providing rough dressed coarse stone masosry in cm. (1:4) in superstructure with approved quality of coarse sand of requisite rn (2.5 to 3) washed and screened with risking out joints to 12mm depth, curing scaffolding and its removal where required royally and all taxes etc. complete Job as per specificition and direction of E/l.(5.2.28) BCD |
| 39 | Providing R.C.C. M-150 with nominal mix of (1:2:4) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l.(3.1.68)PHED |
| 40 | Supplying and laying sand filter blanketing in horizontal portion of the dam as per design and drawing with watering, compaction including cost of sand, royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I. ( 6.1 COMMON PART A ) |
| 41 | Supplying and laying good quality of stone metal filter (20mm to 63mm size) in the rock toe, heel trenches, toe drain as per design and drawing including the cost of materials, royalty, all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I. ( 6.3 COMMON PART A ) |
| 42 | Supplying and laying gravel filter (size 5mm to 15mm ) in filter blanket and in the toe drain ( in horizontal portion) of the dam as per design, drawing including the cost of materials royalty and all taxes etc. but excluding the cost of carriage all as per specification and direction of E/I.(6.2) COMMON PART A |
| 43 | L/C for fitting and fixing 600mmx300mm C.I. grating in the steining walls of intake well as per specification and direction of E/I.(8.59)WRD |
| 44 | Providing 25mm precast R.C.C. M-150 with nominal mix of (1:2:4) jali with approved quality of stone chips of 6mm nominal size and clean coarse sand of F.M 2.5 to 3 with 1.6mm thick M.S. wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing, scaffolding and finishing all complete as per building specification and direction of E/l.(5.3.21.3) BCD |
| 45 | Supplying materials and labour for fixing 20mm dia M.S. bar steps in steining wall of 0.30 M interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.(3.1.71 DW&SD) |
| 46 | Providing 25mm thick C.P. (1:4) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete job as per building specification and direction of E/I. (5.7.12 BCD) |
| 47 | Centering and shuttering including structing, propping etc. and its removal for lintel, beams, plinth beams, girders, bressumers and cantilevers .(5.3.17.5 BCD) |
| 48 | Centering and shuttering including structing, propping etc. and its removal for weather shade, chajjas, corbels etc., including edges .(5.3.17.19 BCD) |
| 49 | Centering and shuttering including structing, propping etc. and its removal for suspended floors, roofs, landings, balconies and access platform .(5.3.17.3 BCD) |
| 50 | Hire charge of diesel operated pump for bailing out of water during construction all complete as per building specification and direction of E/l.WRD pg 48-12 |
| 51 | Cost of carriage of materials : Cement |
| 52 | Sand : |
| 53 | Stone Chips : |
| 54 | Boulder : |
| 55 | Metal : |
| 56 | Bricks: |
| 57 | Centering and shuttering including strutting, propping etc. and removal of form for columns,pillars,piers,abutments,posts and struts 5.3.17.6 BCD |
| 58 | E/W in filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered rammed and fully compacted and finally dressed with earth obtained from excavation of foundation trenches and kept at lead of 50m and initial lift of 1.5m all complete job as per building specification and direction of E/I. (5.1.7 BCD) |
| 59 | Supplying labours and tools for laying and jointing H.D.P.E pipes in trenches and making butt welded joint, supplying heating mirror, jack etc. and providing night guard, barrier and red light to safe guard against ancident, all complete as per specification and direction of E/I. 210/200mm dia 3.1.37 E DWSD |
| 60 | Supplying labours and tools for laying and jointing H.D.P.E pipes in trenches and making butt welded joint, supplying heating mirror, jack etc. and providing night guard, barrier and red light to safe guard against ancident, all complete as per specification and direction of E/I. 110/100 mm dia 3.1.37 B DWSD |
| 61 | Labour charge for fitting & fixing of 125mm to 150mm C.I foot valve or flange (all of standard make with or without check) in position with respective 125mm to 150mm dia G.I pipe including supply of 22mm thick rubber packing and proper size of nut and bolts of hard steel, including making of valve seat etc. complete job including carraige of materials from site godown to work site as per specification and direction of E/I. (8.1)WRD |
| 62 | Labour charge for fitting & fixing 125mm to 150mm dia G.I. or MS Bend of any degree with 125mm G.I. or M.S. pipe(All of standard make) including threading, if required and carriage to work site, all complete job,leak proof, as per specification and direction of E/I. (8.5)WRD |
| 63 | Labour charge for fitting & fixing 200mm/250mm G.I. reducing socket (All of standard make) in position including cost of hard steel nuts and bolts of proper size, rubber packing, safeda etc. including cost of carriage from site godown to work site and T&P, all complete job,leak proof, as per specification and direction of E/I. (8.9)WRD |
| 64 | Labour charge for installation of 20 HP to 35 HP electric motor pump set in position including fixing of base plate, tightening with foundation bolts and nuts in proper alignment and level including starting of the motor pump set including carriage of materials from site godown to work site complete job as per specification and direction of E/I. (8.54)WRD |
| 65 | Labour charge for fitting & fixing of 150mm P.V.C. Bend (All of standard make) all degree and all pressure including carriage from site godown to work site tools and plants etc. all complete job as per specification and direction of E/I. (8.70)WRD |
| 66 | Labour charge for fitting & fixing 150mm x 150mm x 150mm P.V.C. Tee of all pressure in position including carriage from site godown to work site, tools and plants etc. all complete job as per specification and direction of E/I. (8.67)WRD |
| 67 | Labour charge for fitting & fixing 150mm N.R. valve & sluice valve (All of standard make ) in position ( both end ) in position including cost of hard steel nuts and bolts of proper size in 10mm thick rubber packing, safeda etc. including cost of carriage from site godown to work site and T&P, all complete job,leak proof, as per specification and direction of E/I. (8.15)WRD |
| 68 | Labour charge for fitting & fixing 150mm dia P.V.C. Tail piece (all of standard make ) in position including carriage from site godown to work site, tools and plants etc. all complete job as per specification and direction of E/I. (8.62)WRD |
| 69 | Labour charge for fitting and fixing 125mm to 150mm dia G.I or M.S. pipe of standard make in position including threading cutting if required carriage of materials from site godown to work site, all complete job, lead proof, as per specification and direction of E/I. (8.04)WRD |
| 70 | Labour charge for fitting and fixing 100mm/150mm M.S or G.I. reducing socket (all of standard make ) in position including proofing materials and local carriage as per specification and direction of E/I. (8.07)WRD |
| 71 | 63A TPM 415/440 V main switch C.E Lt 2873 dt 31/12/2013, Sl.no-187 |
| 72 | 25/30 HP Star delta oil immersed motor C.E Lt 2873 dt 31/12/2013, Sl.no-186 |
| 73 | Voltmeter - 500 V C.E Lt 2873 dt 31/12/2013, Sl.no-188 |
| 74 | Ampere Meter - 60 A C.E Lt 2873 dt 31/12/2013, Sl.no-189 |
| 75 | Wooden panel board C.E Lt 2873 dt 31/12/2013, Sl.no-202 |
| 76 | Copper industrial cable 7/20 C.E Lt 2873 dt 31/12/2013, Sl.no-194 |
| 77 | Copper industrial cable 7/18 C.E Lt 2873 dt 31/12/2013, Sl.no-197 |
| 78 | 1.5mm sq ISI marked FR LS PVC insulated, single core copper conductor cable (Energy M-445 PAGE 35) |
| 79 | Supplying and fixing of following size PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm ( Energy 1.21.2 ) |
| 80 | Batten Holder C.E Lt 2873 dt 31/12/2013, Sl.no-198 |
| 81 | 5 Ampere Switch C.E Lt 2873 dt 31/12/2013, Sl.no-214 |
| 82 | S/F power plug with piano type accessories:- supplying and fixing suitable size GI/PVC box of 121mm x 173mm x48mm (6''x8'') ( normal size) on surface or reccess with suitable size of phenolic laminated sheet cover on front including and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piono type switch connection, painting etc. as required. (Energy 1.30 ) |
| 83 | 9/ 10 Watt Bulb Energy M-855 page no - 72 |
| 84 | PVC Tape C.E Lt 2873 dt 31/12/2013, Sl.no-195 |
| 85 | P.V.C. Flexible Pipe 1½\\" C.E Lt 2873 dt 31/12/2013, Sl.no-199 |
| 86 | Ceiling fan 48'' (1200mm) BLDC 5 Star (Energy M-779) |
| 87 | Installation testing and commisioning of ceiling fan, including wiring the down rods of standard length(upto 30cm) with 1.5mm sq FR PVC insulated, copper conductor, single core cable etc. as required. (Energy 1.44) |
| 88 | Copper bushbar 63A - 3 Phase 4 Pole C.E Lt 2873 dt 31/12/2013, Sl.no-201 |
| 89 | 25 HP Kirlosker/Crompton Electric Motor Pump set ( 3 phases 415V mono block pump set without accessories Head range 48M to 68M. C.E Lt 2873 dt 31/12/2013, Sl.no-183 |
| 90 | 4\\" dia (110mm) MS pipe tata (C-class) C.E C.E Lt 2873 dt 31/12/2013, Sl.no-01 |
| 91 | Supplying C.I. Foot Valve having single leather flap and gunmetal seating. Valve shall be fixed on suction side of pump as per requirement including jointing material and hardware. Flanged type 100mm (COMMON PART A M1063 PAGE 134) |
| 92 | 4'' (110mm) G.I. Bend - 6mm thick C.E Lt 2873 dt 31/12/2013, Sl.no-84 |
| 93 | 4\\" (110mm) G.I. Flange thick C.E Lt 2873 dt 31/12/2013, Sl.no-86 |
| 94 | 4'' (110mm) Long G.I. Nipple C.E Lt 2873 dt 31/12/2013, Sl.no-89 |
| 95 | Providing and supplying ISI mark CI D/F reflux valves ( Non return valves) of following dia with inspection charges, unloading from railway wagon, loading into truck transportation upto departmental stores/ site unloading stacking etc. complete reflux valve as per IS 5312 Part I(1984). 4. 100mm (COMMON PART A M1039A(4) PAGE 118) |
| 96 | Providing double flange sluice valve ( size 50mm to 1200mm ) confirming for I.S-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps, transportation etc. all complete. With bypass arrangement - PN-1. 4. 100mm( COMMON PART A M1039 B4 PAGE 120) |
| 97 | 4\\" (100mm)x 8\\" (200mm) Reducer thickness 6mm C.E Lt 2873 dt 31/12/2013, Sl.no-96 |
| 98 | Providing and supplying in standard lengths high density polyethylene pipe (HDPE pipe) confirmimg to IS 4984/ 14151/ 12786/ 13488 (Latest revision with necessary jointing materials like mechanical connectors i.e thread/insert joint/ joints excluding coupler/ specials and taxes).(HDPE pipe of materials grade-PE80-PN10)200 mm (Common Part A M-1028, PG-104) |
| 99 | Providing and supplying in standard lengths high density polyethylene pipe (HDPE pipe) confirmimg to IS 4984/ 14151/ 12786/ 13488 (Latest revision with necessary jointing materials like mechanical connectors i.e thread/insert joint/ joints excluding coupler/ specials and taxes).(HDPE pipe of materials grade-PE80-PN10)110 mm (Common Part A M-1028, PG-104) |
| 100 | 8\\" P.V.C. Tee thickness 6mm C.E Lt 2873 dt 31/12/2013, Sl.no-108 |
| 101 | 4\\" P.V.C Tee thickness 6mm (C.E. Lt-2873, dt-31/12/2013, Sl.no-105) |
| 102 | 8\\"(200 mm) P.V.C Bend (C.E. Lt-2873, dt-31/12/2013, Sl.No.-114) |
| 103 | 4\\" (110mm) P.V.C. Tail Piece (C.E Lt 2873 dt 31/12/2013, Sl.no-65) |
| 104 | Solvent Cement (Harward castle) (C.E. Lt-2873,dt-31/12/2013, Sl.no-134) |
| 105 | M-Seal C.E(C.E. Lt-2873,dt-31/12/2013, Sl.no-136) |
| 106 | Goods & Services Tax (G.S.T.) - 18% |
| 107 | Labour Cess - 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
May 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMay 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender