Tender For Upgradation Of Training Institute Infrastructure Under Element Project At Tripura State Forest Academy(Tsfa), Hatipara, Gandhigram / Providing Electrical Installation Works Including Supply, Installation, Testing & Commissioning Of Dg(Dies, Tripura-Tripura

TDR : 55556139

Tender Notice
BOQ

27 Days Left

Tripura , Tripura

Tender Brief : Tender For Upgradation Of Training Institute Infrastructure Under Element Project At Tripura State Forest Academy(Tsfa), Hatipara, Gandhigram / Providing electrical installation Works Including Supply, Installation, Testing & Commissioning Of Dg(Dies

Document Fees
₹ 5900 /-

EMD
₹ 260000.0 /-

Tender Value
Refer document

Submission Date
17-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	(A) SH: Internal Electrification:- Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:-
2	Short Point :-
3	Medium Point :-
4	Long Point :-
5	Wiring for 2 way controlling light point with 3 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type 2 way switch, cover plate, surface modular switch board including connection etc as required:-
6	Short Point :-
7	Medium Point :-
8	Long Point :-
9	Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:-
10	Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:-
11	Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required.
12	2 X 1.5 sq mm:-
13	2 X 2.5 sq mm:-
14	2 X 4 sq mm:-
15	4 X 6 sq mm
16	4 X 10 sq mm
17	4 X 16 sq mm
18	Wiring for light/ fan/ exhaust fan/ call bell point with 2x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amps modular type switch, cover plate, GI box including necessary connection etc. as required.
19	Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required.
20	Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2 x 2.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required.
21	Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-
22	2 X 1.5 + 1 X 1.5 sq mm
23	2 X 2.5 + 1 X 1.5 sq mm
24	2 X 4 + 1 X 1.5 sq mm
25	2 X 6 + 1 X 2.5 sq mm
26	Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:-
27	1 X 1.5 sq mm
28	2 X 2.5 sq mm
29	2 X 4 sq mm
30	2 X 6 sq mm
31	4X 50 sq mm
32	4 X 95 sq mm
33	Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required:-
34	19/20 mm dia:-
35	25 mm dia
36	Supplying and fixing of the following PVC conduit (medium gauge) with all accessories on slab/recessed on wall etc as required.
37	19/20 mm dia:-
38	25 mm :-
39	Supplying and fixing of the following electrical accessories i/c necessary conn. etc. as reqd.
40	Electronic 5 step fan regulator
41	Ding dong call bell
42	Angle/batten holder
43	5 amps power top:-
44	15 amps power top:-
45	Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required.
46	1-2 module plastic switch board:-
47	1-2 module GI switch board:-
48	Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required.
49	1-2 module :-
50	Supplying and fixing of the following modular accessories including necessary connection etc. as required.
51	3/6 pin 25 amps socket outlet (2M):-
52	Blank plate (1M):-
53	20/25 amps single phase motor starter switch (2M):-
54	TV socket outlet (1M):-
55	Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\\"x 12\\" having locking arrangement including CC work, holes on earth pipe etc. as required.
56	Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.
57	Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.
58	Providng and laying 15mm dia (medium gauge) G.I. pipe for drawing of 4.06mm (8SWG) dia G.I./ Copper wire for earth connection from earth electrodes etc as required.
59	Earthing with Copper earth plate 600 mm x 600 mm x 3 mm thick i/c accessories and providing masonry enclosure with CI cover plate Size 12\\"x 12\\" having locking arrangement, along with 20 mm dia (medium gauge) watering pipe including CC work etc as required:-
60	Extra for using salt (12 kg) and charcoal (96kg) for plate earth electrode as required.
61	Proving and fixing / Drawing 4.06 mm dia (8 SWG) Copper wire on surface or in existing G.I / PVC / Polythene pipe for loop earthing as required.
62	Providng and laying 15mm dia(medium gauge) G.I. pipe for drawing of 4.06mm (8SWG) dia G.I./ Copper wire for earth connection from earth electrodes etc as required.
63	Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod, canopies ,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W) : -
64	Supplying & fixing of 1400 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked) : -
65	Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:-
66	Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:-
67	Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:-
68	Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with precise street optic lens with heat resistant tempered glass/diffuser protection with IP66 and IK10 impact resistant including necessary connection etc. as required (50000 burning hours, THD ≤ 10% and minimum lumen output of 120 lm/watt with LM79 report from NABL accredited lab):-
69	80 watt LED street light fixture with integral driver and secondary lens :
70	Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-
71	Recessed round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:-
72	Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:-
73	Supplying and fixing of recessed mounting CRCA powder coated housing 2ft x 2 ft decorative 36 watt LED panel light fixture with integral driver, inbuild SPD >= 3 kV and high quality polycarbonate diffuser having and THD <=10%, luminous efficacy of 100 lumen/watt & life expectancy of 50,000 burning hours including ncessary connection etc as required:- (with LM79 report from NABL accredited lab):-
74	Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-
75	9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-
76	12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-
77	Supply and fixing of surface mounted 18/20 watt LED tube luminaire with powder coated finished 0.5 mm thick CRCA steel sheet housing including 1 no 18/20 watt LED tube having minimum system lumen output of 120 Lumens/watt & life expectancy of 50,000 burning hours with integral driver having 2 kV SPD and polycarbonate diffuser including connection etc as required (with LM79 report from NABL accredited lab):-
78	Supply and fixing of surface mounted double 20 watt LED tube luminaire with powder coated finished 0.5 mm thick CRCA steel sheet housing including 2 nos. 20 watt LED tube having minimum system lumen output of 100 Lumens/watt & life expectancy of 50,000 burning hours with integral driver having 2 kV SPD and polycarbonate diffuser including connection etc as required (with LM79 report from NABL accredited lab):-
79	Supply and fixing of surface mounted 20 watt, Arc 3-in-1 colour changing LED batten tube luminaire with Anti corrosion Al. extrusion housing including integral driver having 4 kV SPD and & premium opal diffuser including connection etc as required :-
80	Supplying and fixing of following outdoor decorative round shaped 45 watt LED post top luminaries in powder coated die cast housing complete with polycarbonate diffuser with IP66 protection and IK08/IK10 impact resistant including necessary connection etc. as required (50000 burning hours, THD ≤ 10% with integral driver having 5kV internal SPD and 4000K colour temperature with LM79 report from NABL accredited lab):-(Wipro model LB05 Urbano or smilar model of Phillips/ Havells)
81	Supplying and fixing of following luminaries complete with necessary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours):-
82	Decorative wall mounting fancy bracket light fixture suitable for GLS or retrofit CFL/LED (without lamp) : -
83	Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:-
84	300 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):-
85	200 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):-
86	100 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):-
87	32 amps 415 volts four strip Copper busbar chamber 4 ways of size (300mmx240mmx80mm):-
88	Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:-
89	32 amps 415 volts TPN main switch (rewireable):-
90	100 amps 415 volts TPN main switch (rewireable):-
91	200 amps 415 volts TPN main switch (rewireable):-
92	250 amps TPN 415 volts front handle cubical main switch (HRC):-
93	Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.
94	4 way SPN MCB DB (double door):-
95	(2+4) / 6 way SPN MCB DB (double door):-
96	(2+6) / 8 way SPN MCB DB (single door):-
97	(2+10) / 12 way SPN MCB DB (double door):-
98	4 way horizontal TPN MCB DB (Double door):-
99	6 way horizontal TPN MCB DB (Double door):-
100	8 way horizontal TPN MCB DB (Double door):-
101	12 way horizontal TPN MCB DB (Double door):-
102	4 way vertical TPN MCB DB suitable for FP MCCB incomer upto 125 amps (Double door):-
103	Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as require:-
104	6 to 32 amps SP MCB:-
105	6 to 32 amps DP MCB:-
106	6 to 32 amps TPN MCB:-
107	40/50/63 amps TPN MCB:-
108	Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:-
109	40 amps DP isolator:-
110	40 amps TP isolator:-
111	63 amps TP isolator:-
112	40 amps FP isolator
113	Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):-
114	16 to 100 amps TP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):-
115	200 amps TP MCCB, Breaking capacity 25KA (Thermal Magnetic) :-
116	Supplying, installation, testing & commissioning of powder coated prewired panel board suitable for 415 volts TP MCCB as incomer & outgoing including busbar & connection as required of the following ratings & sizes:-
117	6 way TP MCCB outgoing & TP MCCB incomer upto 400 amps:-
118	Supplying, installation, testing & commissioning of powder coated prewired digital meter module complete with ammeter, voltmeter, phase indicator lamp, control fuses, CTs, in the existing panel board including connection etc. as required:-
119	Supplying, installation, testing & commissioning of powder coated side cable module (1 pair) in the existing panel board including connection etc. as required suitable for the following sizes and ratings:-
120	Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required
121	3 core 4 Sq mm
122	3 core 10 Sq mm
123	4 core 95 Sq mm
124	Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer :-
125	Drawing of armoured/un-armoured cable with proper saddling etc as required:-
126	Supplying and fixing of Alumimum terminal ends (LUGS) - long barrel of following sizes: -
127	4/6 sq mm
128	10 sq mm
129	16 sq mm
130	95 sq mm
131	Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: -
132	4 sq mm
133	6 sq mm
134	10 sq mm
135	16 sq mm
136	50 sq mm
137	70 sq mm
138	Supplying and fixing of heat shrinkable cable end termination kits of following sizes : -
139	3.5 core or 4 core 70/95/120/150 sqmm size:-
140	Supplying and fixing of heat shrinkable straight through cable jointing kits of following sizes : -
141	3.5 core or 4 core 70 sq mm size:-
142	Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : -
143	1.5 sqmm - 4 sqmm Cable:-
144	Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-
145	40 mm dia
146	Supplying and fixing of 20 mm MS pipe as down rod for installation of luminaries with necessary accessories etc as required.
147	Supplying and fixing of full thread ball socket for fixing of down rod for installation of luminaries with necessary accessories etc as required.
148	Supplying & fixing of 40 mm dia G.I pipe (medium gauge) cross bar for fixing of ceiling fan/luminaries including painting & necessary accessories etc as required.
149	Supply and fixing of 3 mtr long 89 mm OD MS decorative pole with powder coated finish having 180mmx180mm 8mm thick base plate and 16mm dia 450mm long foundation bolt etc as required. ( Wipro / Philips/ Klite Make )
150	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size):-
151	6 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. In cement mortar 1 : 4 ( 1 cement : 4 fine sand ):-
152	Neat cement punning:-
153	Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-
154	(B) SH: Online UPS & Inverters:- SITC of 10kVA-10kW 3Ph/3Ph Online UPS with IGBT based rectifier & inverter with unity power factor. Operating Frequency Range: 45-55 Hz. Input THDi <3%. Input voltage of 380/400/415 Vac 3Ph +N+PE. Phase sequence corrector, back feed potection, isolation transformer. Output THDi ≤ 2% with Linear Load ≤ 4% with Non-linear load. Overload of ≤ 110% for 60min ≤ 125% for 10min. Efficiency > 94%, Should work on the operating temperature of 0 degree C – 40 degree C. Certified with BIS, CE, ISO 14001 2015, ISO 45001 2018, IEC 62040-1,2&3 and NABL test lab for safety/Performance. including 20nos. 65Ah battery with battery rack and DC breaker for 60 minutes back up (OEM should have service center in State and 10 Years presence in India with 2 years warranty.)
155	SITC of 05kVA-4kW 1Ph/1Ph Online UPS with IGBT based rectifier & inverter with 0.8 power factor. Operating Frequency Range: 46-55 Hz. Input THDi <10%. Input voltage of 160/176/300 Vac 1Ph +N+PE. Phase sequence corrector, back feed potection, isolation transformer. Output THDi ≤ 3% with Linear Load ≤ 5% with Non-linear load. Overload of ≤ 130% for 30min ≤ 150% for 05min. Efficiency > 94%, Should work on the operating temperature of 0 degree C – 40 degree C. Certified with BIS, CE, ISO 14001 2015, ISO 45001 2018, IEC 62040-1,2&3 and NABL test lab for safety/Performance. including 18nos. 42Ah battery with battery rack and DC breaker for 60 minutes back up (OEM should have service center in State and 10 Years presence in India with 2 years warranty.)
156	Supplying, installation, testing and commissioning of following ratings inverter with Square/ sine wave technology, noiseless operation, inbuilt advance PCB programming, microprocessorwith all accessories including necessary connections etc. as required:-
157	900VA, 12V DC, 1 Ph input/1 Ph output inverter(Sine wave technology):-
158	Supplying, installation, testing and commissioning of following ratings Valve regulated lead acid(VRLA) battery with all accessories including necessary connections etc. as required:-
159	12 V/ 150AH tall tubular/ flat plate Battery:-
160	(C) SH: CCTV INSTALLATION SYSTEM:- SITC of 55 inch 4K Ultra HD LED display having IPS / VA technology With wall mount bracket,Resolution 4K Ultra HD/3,840 x 2,160 (aspect ratio of 16:9) UHD or more, Brightness 500 nits or more, Built in Speaker (10W+10W), Duty Cycle 24 X 7 operation,HDMI,DP,DVI-D,RS 232, LAN,USB,WiFi,Screen share, IP5X Dust Proof Certfied design 16 GB internal memory,Compatibility and OEM should have service center in State and 10 Years presence in India with 3 years warranty.Make:-( Panasonic/SAMSUNG/SONY/LG)
161	SITC of STQC compliance 5 MP IP bullet/ Dome Camera -1/2.8”/3.6'' SONY - CMOS, (Min. ) 5MP, 0Lux with IR LED on, Horizontal Field of View: minimum 107 degrees and IR Range of (minimum) 50 meters. Video Analytics: Trip Wire, Intrusion Detection and Motion Detection, PoE Support, NAS Storage, SD Card(512GB optional), Quad Stream Support with 2 years Warranty.Make:-(Matrix/ Panasonic/ bosch/ Honeywell/CP Plus)
162	SITC 10/100/1000 (all) 8 Port PoE+(55W)switch with 2 SFP uplink ports / CloudManaged, model : GS110TPV3, make: Netgear, equivelant spec. of CISCO. The Switch must have lifetime hardware replacement warranty, replacement with New Product Only ,No refurbished Products.
163	SITC 16 Channel NVR with 4K Support and 1 HDD Slots •16 IP Channel Inputs; 4K HDMI, 1/1 Audio I/O and 2/1 Alarm I/O •12MP, 8MP, 5MP, 4MP, 3MP, 2MP, 720p, D1 and CIF Recording Resolution •2x 4K/ 8x 1080p/16x 720p/36x D1 @30FPS Local Decoding •2 SATA HDD Support (Maximum 10TB Capacity per Slot, Hard Disk Not Included) •Save Storage Space with Adaptive Recording and Camera-wise Recording Retention •SMS & Email Notification, Video Pop-up, Alarms and Calling from Mobile Application •360Mbps Throughput - 180 Uplink, 180 Downlink, ONVIF and Major Camera Brands Support •Cascading: Create Multiple NVR Clusters to Monitor and to Control multiple NVRs (Matrix/ CP Plus / Honeywell).
164	SITC of 10 TB Surviliance HDD (WD/ Seagate / Toshiba)
165	Supplying , laying shaddling of CAT6A, U/UTP, Horizontal Cable, LSZH, Grey, 305m in existing PVC conduit/casing and capping etc as required Reel Make: RiT/Panduit/Beldon/Derwiser
166	Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.
167	25 mm dia
168	SITC of NET WORK protector 12U RACK ,600watt/500D with i/c necessary accessories as reqd., make: D Link/ Netrack/WD
169	SITC of Wall mount Rack 4 U (550WX400D mm) with 1X3 socket 5Amp power distribution unit258mm(OD)/178mm (Usable-4U)height (Metal) Lockable Tintable Toughened Glass door cabinet box with key lock , assembled with 230V AC Power metal cooling fan provision on top i/c necessary accessories as reqd., make: D Link/ Netrack/WD
170	D-Link (India) RJ45 1080p wired connector Module Plugs- pack of 100 nos. (D Link/ Natrack / Rackom)
171	(D) SH: DG Set & AMF Panel:- Supply installation, testing and commissioning of Silent Type -Floor Mounted Diesel Generator set CPCB IV+ Compliance model alongwith having prime power rating of minimum 125 KVA, 415 volts at 1500 RPM,coupled with 3 phase Alternator at 415 volt ,0.8 lagging power factor suitable for 50Hz, 3 phase system & for 0.85 load factor and consisting of the following i/c DG Change over panel / AMF panel : DEF Tank Capable of 10-12 Hrs of Operation. (With 2 years warranty from the date of installation)a) Diesel Engine:-4 stroke, Electronic Engine direct injection, liquid cooled, Six cylinder in Line, electric start, of suitable BHP at 1500 RPM suitable for above output of alternate at 40 degree C, 50% RH & at 1000 meter MSL and conforming to BS 5514, ISO 3046, electronic governor, exhaust mainfold with SS exhaust flexible, flywheel and flywheel housing, fule and lube oil filters, dey type air cleaner, starter motor, battery charger capable of taking 10% over loading for one hour in 12 hours of continuos operation.Fuel consumption should not to be more than 23 litres(Considering 0.845 specific gravity of diesel with +1% tolerance)at 75% load,the change of lubricrant oil should be at minimum 700 hrs or 1 year,whichever is earlier. The engine to be fitted complete with all the required accessories. b) Engine mounted Instrumental panel fitted with and having digital display for following:-Start-stop switch with key,Water Temperature indication,Engine Temperature indication,Lubrication oil temperature indication,Battery Charging indication,Battery Voltage indication,Battery Voltage indication,Over speed indication,Low lub Oil trip Indication,Engine Hours Indication.
172	c) Alternator:- synchronous alternator rated at minimum 125 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor, temperature rise at 125 Degree C..Brushless Single Bearing, (4 pole), rotating field, solid state voltage regulator, voltage regulation +- 1%, insulation class H, sealed type 1 bearing, flex disc coupling, 100% rating of one step load accaptance, 25% of rated amps, unbalanced load capability. The alternator shall be having silentacoustic enclosure. d) Fuel Tank:-Daily service fuel Tank suitable for minimum 6 hrs of operation capacity at full load fabricated out of 3 mm thick M.S sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ' c' pipes of suitable dia complete with valves, level indicators 7 accessories as requtred as per specifications.e) Exhaust System Residential silence type, max allowable back pressure 10.0 kPa exhaust temperature 471.2 °C,f) Starting System12 V/ 24 V DC starting system comprising of starter motors voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 180 Amp, Hour capacity lead acid type) as required as per specifications.g) EnclosurePowder coated weather proof canopy Engine and alternator mounted on AV mounts with, with silence and SS exhaust below optimised to meet stringent MOEF / CPCB norms for sound and emission-Baserail with drawout type fuel tank, drain plug, inlet and outlet connections, airvent, level gauge.
173	Design, fabrication, supply, installation, testing & commissioning of floor-mounted indoor-type partially type-tested panel (IP 43) (manufactured by a CPRI-approved electrical panel manufacturer) of the following specifications. ENCLOSURE: The enclosure should be fabricated from CRCA (Cold Rolled Close Annealed) sheet steel, with hinged doors provided at both the front and rear. Cable entry and outgoing connections shall be from the bottom/Top through a gland plate. The enclosure body, doors, and other parts shall be made from 2.0 mm thick CRCA sheets, while the gland plate shall be 3.0 mm thick. The entire enclosure shall be subjected to a seven-tank pre-treatment process and finished with a minimum 60-micron thick powder coating of light grey color, shade RAL 7032 (simens Grey). AMF CONTROLLER:- The system shall operate on 24V DC power and include Automatic Mains Failure (AMF) and Automatic Transfer Switch (ATS) functions. It shall have CAN bus and serial communication facilities. The device shall provide protection as per ANSI codes: 27P (under voltage), 59 (over voltage), 81U (under frequency), 81O (over frequency), 50TD (time delay overcurrent), 32F (forward power), 32R (reverse power), 14 (under speed), 12 (over speed), and 51 (inverse time overcurrent) . BREAKER DETAILS:- Four (04) numbers of ACB incomers (two for feeders, one for DG and one for outgoing ) shall be provided, each rated at 200A, 4-pole, with a breaking capacity of 50kA (Icu = Ics = Icw for 1 second). All ACBs shall be of EDO (Electrical Draw-Out) type and equipped with a microprocessor-based protection release. Including , three (03) numbers of undervoltage (UV) coils rated at 415V AC & 200A,TPN Motorised changeover. (L&T/SOCOMEC) METERING & INDICATIONS:- The metering and indication system shall include four (04)no. multifunction meters capable of measuring voltage, current, frequency, power factor, kilowatt, kilovolt-ampere, energy in KWh (old), on and run hours, with site-selectable kWh/kVAh display, accuracy class 0.5, auxiliary supply of 80–300V AC/DC, LED display, and RS-485 communication port. One (01) VAF meter shall be provided for measuring voltage, current, frequency, and power factor, with class 0.5 accuracy, auxiliary supply of 80–300V AC/DC, and 96x96 mm LED display. One (01) DC analog voltmeter of range 0–30V DC (MI type) and one (01) DC analog ammeter of range 0–30A DC (MI type) shall be provided. Indication lamps shall be provided as follows: four (04) red, four (04) yellow, and four (04) blue lamps operating at 230V AC; one (01) red and one (01) green lamp operating at 230V AC; four (04) red, four (04) green, four (04) amber, and one (01) white lamp operating at 24V DC. All indication lamps shall be of cluster LED type of 22.5mm dia. CT DETAILS:-Three (03 nos. of Current Transformers (CTs) shall be provided, each having a rating of 200A/5A, 10VA, accuracy class . BATTERY CHARGER:- One(01) no. of battery charger shall be provided of CCCV type. ( Lauritz Knudsen /ABB/ Legrand/Siemens/MICROPOWER/NHP). BUS BAR DETAILS:- Two (02) sets of incomer power busbars, one (01) set of outgoing power busbar, and one (01) set of common power busbar i/c one (01) set of Earthing busbar shall be provided. Each busbar shall be rated at 200A, TPN, and made of EC-grade aluminium, designed considering a current density of 1.0A/sq.mm. The busbar system shall include colour-coded heat shrink sleeves and suitable insulators for proper phase identification, insulation, and safety. CONTROL CIRCUIT ACCESSORIES:- The control circuit accessories shall consist of push button actuators (green, red, and emergency type), TNC switches, contact block modules (NO and NC), control relays with relay bases, selector switches,MCB as suitable for above installation
174	Supply and fixing of 150 mm dia MS pipe for DG set extra exhaust pipe above the provided pipe along with DG set icluding painting etc as required:-
175	Earthing with copper earth plate 600 mm x 600 mm x 3mm thick i/c accessories and providing masonry enclosure with CI cover plate size 12\\"x 12\\" having locking arrangement along with 20mm dia (medium gauge) watering pipe including CC work etc. as required.
176	Extra for using salt (12 kg) and charcoal (96kg) for pipe earth electrode as required.
177	Supply and fixing of 25mm x 3mm Copper on walls/ floor of the building for horizontal/ vertical network including necessary spacers and porcelain insulators at regular intervals.
178	(E) SH: LAN, Internet port with necessary Switch :- Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.
179	19/20 mm dia
180	25 mm dia
181	SITC of network Protector Rack 6 U Rack 6U/9U,600watt/500D with all accessories make: D Link/ Netrack/WD/TATA TRYNOX/LEGRAND/RITTAL
182	SITC 10/100/1000 24 Port all POE+(190W)switch with 2 SFP uplink Port / CloudManaged, model : GS724TP, make: Netgear, equivelant spec. of CISCO.The Switch must have lifetime hardware replacement warranty, replacement with New Product Only ,No refurbished Products.
183	SITC 10/100/1000 (all) 8 Port PoE+(55W)switch with 2 SFP uplink ports / CloudManaged, model : GS110TPV3, make: Netgear, equivelant spec. of CISCO. The Switch must have lifetime hardware replacement warranty, replacement with New Product Only ,No refurbished Products.
184	Supplying , laying shaddling of CAT6A, U/UTP, Horizontal Cable, LSZH, Grey, 305m in existing PVC conduit/casing and capping etc as requiredReel Make: RiT/Panduit/Beldon
185	SITC of CAT6A UTP Patch Cord, LSZH, Blue, 1.0 Meter,Make: RiT/Panduit/Beldon
186	SITC of CAT6A UTP Patch Cord, LSZH, Blue, 2.0 Meter, Make: RiT/Panduit/Beldon
187	SITC of Cat6A I/O full Set Single Module + Back Box, Make: RiT/Panduit/Beldon/Legrand
188	(F) SH:STADIUM HIGHMAST,LUMINARIES & ACCESSORIES FOR PLAYGROUND:- Supply,Installation,Testing & Commissioning of 20 Mtr Raising-lowering type Stadium High mast having hot dip galvanised and suitable for wind velocity 50m/sec as per the IS: 875 Part - III & with arrangement for mounting 12 nos 500W LED flood lights assymetrically complete with accessories like DGDD Winch, power tool, Wire rope , EPR Trailing cable, Lightning arrestor , IP 65 JB , 2 nos LED single dome Aviation Obstruction Lights and along with suitable foundation accessories including Construction of raft foundation with M-25 grade concrete for the raising-lowering type 20 mtr Stadium mast considering the safe soil bearing capacity 10T/m3 at site at the time of execution of work. (Supply & installation of GI pipe of required size through foundation for cable entry is included.)Make:- Wipro/Havells/ Phillips/ Utkarsh.
189	Supply and fixing of 500W Highly advanced LED Floodlights with integral cradle,Metal Clad PCB’s,Technically advanced Optic lens with high precision light output (having IP66 driver with high performance driver efficiency not less than 85%,SPD-10KV ,system efficacy not less than 120 lumen/watt)housing with alumimum die-cast having minimum 50000 burning hours of LED with ambient temperature lying between -10degree to +45degree,Electrical insulation should be of class1,with biological safety report of LED i/c connection etc. as required.Make:-Wipro/Havells/Phillips.
190	SITC of Outdoor stand mounted Feeder Panel CRCA Housing Powder coated having 1.6 mm thickness complete with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching for luminaries.(IP 65). Make:- Phillips/Utkarsh/ABB.
191	Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required
192	4 core 25 Sq mm
193	4 core 16 Sq mm
194	Supplying and laying of following sizes XLPE insulated PVC sheathed copper conductor Un-armoured cable including necessary connection etc as required.
195	3 core 1.5 Sq mm
196	Supplying and fixing of heat shrinkable cable end termination kits of following sizes : -
197	2 core 16 sq mm or 4 core 10/16 sqmm size:-
198	Supplying and fixing of heat shrinkable straight through cable jointing kits of following sizes : -
199	2 core 16 sq mm or 4 core 10/16 sqmm size:-
200	Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : -
201	16 sqmm - 50 sqmm Cable:-
202	Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per direction of Site Engineer :-
203	Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\\"x 12\\" having locking arrangement including CC work, holes on earth pipe etc. as required.
204	Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.
205	Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.
206	Providng and laying 15mm dia (medium gauge) G.I. pipe for drawing of 4.06mm (8SWG) dia G.I./ Copper wire for earth connection from earth electrodes etc as required.
207	(G) SH: DISPLAY SOLUTION WITH NECESSARY SWITCHES:- SITC Of 98\\" display with Active Screen Size (\\"inch) 98\\" or above,Display Backlight DLED,Display aspect Ratio 16：9,Resolution 3840 x 2160 or better,Display Colors 10 bit or better,Brightness 440nit(w/o Glass, max),Contrast Ratio (Typical) 1200:1,Touch Response Time 5ms,Response Time (Typical) 8ms (G to G) Panel Response Time,Haze 25%,Viewing Angle 178∘ x 178∘,Display Orientation Landscape,Speakers Inbuilt,Max. Power Output 2x15 Watts,Speaker Position Seamlessly mounted in lower side of the display. Front facing, Forward through,Touch Technology Deployment:Inbuilt Touch and No overlay is allowed,Touch Sensor:Advanced IR,Surface material of touch surface:Anti-Glare & Anti-Finger Print Glass,Protection:3T(Anti-Glare) with 7 Mohs,Touch Screen Writing Tools:2 x Touch Pen included and Finger Both,Positioning Accuracy:±1.5mm,Transparency:88% or better,HID Support Yes,Touch Points in Windows 40 Touch Points,Touch Points in Embedded OS 32 Touch Points,Writing Tool 2 x Touch Pen included and Finger Both.Communication Interface Inbuilt USB-A type,Ports:3x HDMI In, 1xHDMI Out, 1x VGA, 2xTouch USB Out,RJ45 LAN In, RJ45 LAN Out, RS232C In/Out, 4xUSB 3.0, 1xUSB 2.0, 1xUSB Type-C, Audio In, Audio Out Optical SPDIF.OPS Slot:OPS Slot Inbuilt,Multimedia File Formats Supported:Support all major types of multi-media files,GUI - Graphic User Interface:Android OS with GUI.Software Features:Software must support all basic features like Pen selection, width selection, Color change, Background change, erase, Multiple page navigation, saving of file in PDF and JPEG. Split-Screen with Input source.Special software Features Whiteboard software should give option to navigate page with 2 fingers without using menu. Special eraser to erase while writing without selecting menu.Multimedia File Formats Supported Support all major types of multi-media files,RAM 8GB or better,ROM 64GB or better,Power consumption 460 Watts, Storage Temperature/Humidity-15℃~55℃/20～90％RH(Non coagulation),Working Temperature/Humidity 0℃-40℃/20～80％RH(Non coagulation).OEM must have their own Direct Service set-up/Branch in the state with a service team of minimum 1 trained Service Manager/Engineers on OEM’s payroll with a minimum two(02)years warranty.OEM Should have ISO 9001:2015, ISO 14001:2015 and BS OHSAS 18001:2007 / ISO45001:2018 certifications.Make: LG/SONY/Samsung
208	SITC of interactive display Screen Size 86\\" or Higher,Native Resolution 3840 x 2160 (UHD) ,Brightness Minimum 440cd/m2 ,Contrast Ratio 1,200:1 or Higher ,Viewing Angle(H x V) 178 x 178,Surface Treatment Anti-glare treatment or similar ,Min Input ports HDMI x3(with HDCP 2.2),VGA x 1, USB 3.0 x 4, USB 2.0 x1, USB(Type C x1 with power delivery and DP Alt Mode), OPS Slot x 1,Min Output Ports Audio-1( Audio out to connect additional Speakers if required), Optical SPDIF x1, HDMI-1, Touch Out USB x 2.External Control RS232C, RJ45 input and output bothBuilt in Touch type IR spread /P Cap/Incell/In glass.Touch Accuracy ±1mm or less,Air Gap Between LCD Module & Glass Minimum 1 mm or less.Protection Glass Thickness 3T (Anti-Glare) or Higher ,Multi touch point Min 40 Points or Higher ,Interactive Feature White Board & Standard Interactive features, Writing, Pen, Palm Eraser , Screen Capture, Storage, Tool Bar, Air Class for Online test/Quiz, USB Block feature for safety , Dual Pen support,Bluetooth connectivity ,Built in Standard OS Android 13.0 (EDLA) or better .Key Harrdware Features : Minimum Internal Memory (64GB), Quad core A55 , GPU-Mali G52MP2, RAM DDR 8GB or higher, USB Block, Anti Glare Coating on glass surface, 7 Mohs and 9H Hardness, Haze 28%,Key Software Features:Screen Share/Mira cast to Connect TAB/Mobile, Web Browser ,Wi-Fi, Apple Airplay inbuilt, Booting Logo Image Change Option, Able to connect and show upto 9 devies wirelessly on screen, DMS software option from same OEM of display, PIP, PBP, Wake on LAN, Able to open and work on minimum 4 applications side by side on one screen at a time.PCB Protective Coating :Conformal Coating on PCB to prevent from Humidity , Dust & Iron Particles ,Power Supply 100-240V~, 50/60Hz.Power Consumption (Typ.) 385W or less.Built in Audio Power 30W(15W x 2) or higher ,Product Quality..OEM must have their own Direct Service set-up/Branch in the state with a service team of minimum 1 trained Service Manager/Engineers on OEM’s payroll with a minimum two(02) years warranty.OEM Should have ISO 9001:2015, ISO 14001:2015 and BS OHSAS 18001:2007 / ISO 45001:2018 certifications.Approved Make: LG/SONY/Samsung
209	SITC of display of Screen Size 55\\" UHD,Resolution 3840 x 2160,OS WebOS or Equivalent,Processor α 7 AI processor 4K Gen 8 or better,Speaker Minimum 10W +10W,Ports:USB x 1,HDMI In x 3, Wi-Fi Inbuilt, Bluetooth ,RJ 45 x 1, RF x 2, Digital Audio out(Optical)-Yes,Other features Screen Sharing ( Miracast ), Google Assistant, Amazon Alexa , Air Play, Google cast, Bluetooth audio playback,, Smart remote Power Consumption 165(Max) or less, 140(Typ) or less,VESA Compatible(mm)300x200, Certification BIS. OEM must have presence in India for more than 15 years (Certificate of Incorporation required).OEM must have their own Direct Service set-up/Branch in the state with a service team of minimum 1 trained Service Manager/Engineers on OEM’s payroll with a minimum two(02) years warranty.OEM Should have ISO 9001:2015, ISO 14001:2015 and BS OHSAS 18001:2007 / ISO45001:2018 certifications..Make: LG/SONY/Samsung
210	SITC of Digital Interactive Podium in Metallic Frame and Wooden Top with 19 inch Full HD (Electromagnetic + Capacitive) Interactive Display with Electromagnetic Pen, with Motorized Tilting of the Interactive Panel, with provision to install Gooseneck Microphone, Interactive panel, Keyboard Tray and space to store AV equipment, Interactive display with full HD resolution of 1920x1080, Technology IPS LCD, Aspect ratio16:9, Brightness 250 cd/m2, Contrast ratio1000:1, Pen Type shall be Pressure-sensitive and cordless. Top connectivity plate with HDMI x 2, USB x 2 and Power socket for external Laptop connectivity, built-in 4 x 2 HDMI Matrix Switcher with 4K@60Hz (4:4:4, 8- bit) as well as support for 16-bit Deep Colour, HDR (High Dynamic Range), 3D content, HD audio and other features defined by HDMI 2.0 specification and Audio De-embedder for internal connectivity.Make: AHA, Universo, Smartmedia.
211	SITC of 30 feet length or more passive, bidirectional HDMI to HDMI cable. Should have Male to Male HDMI connector. Suport Resolutions of Without DCS: up to 8K @ 30Hz 4:4:4 or 4K @ 120Hz 4:4:4, With DCS: up to 8K @ 120Hz 4:4:4, 8K60 4:4:4 video, 48 Gbps bandwidth, HDCP 2.3 or better, 24k gold-plated 19-pin Type A connectors or better, Thin and highly flexible CL2-rated cable, RoHS compliant . Make: Extron/Crestron/Lightware
212	SITC of 06 feet length or more passive, bidirectional HDMI to HDMI cable having Male to Male HDMI connector. Suport Resolutions of Without DCS: up to 8K @ 30Hz 4:4:4 or 4K @ 120Hz 4:4:4, With DCS: up to 8K @ 120Hz 4:4:4, 8K60 4:4:4 video, 48 Gbps bandwidth, HDCP 2.3 or better, 24k gold-plated 19-pin Type A connectors or better, Thin and highly flexible CL2-rated cable, RoHS compliant. Make: Extron/Crestron/Lightware
213	SITC of 10m USB 2.0 Type A to B cable with a maximum data transfer rate of 480Mbps. Should have a double-shielded, tinned copper conductor, gold-plated contacts with a PVC jacket. Make: Lindy/Purelink/Kramer
214	SITC of FacePlate with HDMI & USB connectivity. Make: Havels/Lindy/Purelink
215	Intelligent video bar for meetings. The system should combines microphones, speakers, and cameras in one front of room device. High- quality speakers and microphones deliver exceptional full-duplex performance. Three built-in conferencing cameras capture the room in panoramic 4K resolution with a seamless 180° horizontal field of view. The video bar is optimized for all leading UC platforms, including both Microsoft Teams® Rooms and Zoom Rooms™ software. Increases meeting efficiency and productivity with easy to purchase, deploy, scale, and use connecting to meetings from user laptop.Make: Lumens/ Crestron/Aver
216	(H) SH: AUDIO SYSTEM:- SITC of the Gooseneck Microphone is an 18-inch professional-grade microphone featuring a dual-flex gooseneck design, providing versatile positioning and superior durability. It is engineered for natural audio reproduction and incorporates a low-noise microphone preamp circuit, ensuring clear and accurate sound capture, making it ideal for conference rooms, podiums, and public address applications. The microphone is constructed with a superior brass body finished in black matte, combining durability with a sleek, professional appearance. It includes both a low-frequency roll-off switch and a -10 dB attenuation pad, allowing flexible adjustment to different acoustic environments. This back electret-condenser microphone has a cardioid polar pattern with a frequency range of 30 Hz to 18 kHz and a low-frequency roll-off at 180 Hz with 12 dB/octave. It has an impedance of 250Ω ± 30% at 1 kHz, an open-circuit sensitivity of -57 dB ± 3 dB, and a maximum input sound level of 115 dB SPL at 1 kHz with 1% T.H.D. Its dynamic range is 82 dB at 1 kHz at maximum SPL, with a signal-to-noise ratio of 61 dB at 1 kHz and 1 Pa. The microphone operates on phantom power from 11 to 52 V DC at 2 mA typical and features switches for flat/roll-off and a 10 dB pad. Overall, this gooseneck microphone delivers excellent speech intelligibility, low handling noise, and consistent cardioid directivity, making it a reliable solution for demanding installed sound applications.Make: Erthpot/Beyerdynamic/Clockaudio/BOSCH/Televic
217	SITC of Wireless Headworn System features the Single-Channel Diversity Receiver, operating over a carrier frequency range of 522 MHz to 936 MHz with FM stereo modulation and PLL-synthesized oscillation for stable, high-quality audio transmission. The receiver offers a sensitivity of 5 dBμV with S/N >60 dB at 25 kHz deviation, a bandwidth of 32 MHz (region dependent), maximum deviation of ±45 kHz, S/N ratio >105 dB, T.H.D. <0.7% @1 kHz, and an audio frequency response of 45 Hz–18 kHz ±3 dB. Typical operating range is 80–100 m in open space and provides output through XLR balanced and 6.3 mm phone jack unbalanced connectors. Body Pack Transmitter operates over the same 522–936 MHz carrier range with PLL-synthesized oscillation, harmonic radiation <45 dBm, bandwidth up to 134 MHz (region dependent), and ±45 kHz maximum deviation. It features a TA4M input connector, selectable RF output power of 10 mW or 40 mW, powered by two AA batteries with typical current consumption of 110 mA and a battery life of approximately 11 hours. The die-cast metal body. TheHeadworn Microphone uses a back electret condenser element with an omnidirectional polar pattern, sensitivity of -40.5 dB ±2 dB, output impedance <2.2 kΩ, and S/N ratio >59 dB. Its capsule measures 4.0 × 1.5 mm, providing a frequency response of 20 Hz–15 kHz. It is powered by 210 V DC, comes with a 1.2 m cable, and connects via a TA4F connector.Make: Erthpot, Beyerdynamic, Clockaudio
218	Single Channel Wireless Lavalier Microphone with Built in AFS(Automatic Frequency Selection) technology, Should have UHF operating mode with Frequency range of 522 -930Mhz or better, Should have operating bandwidth 134 MHz or better, Anti Interference technology ensures Noiselock Squelch effectively blocks Stray RF or better, Microphone Frequency Response of 45Hz to 18Khz or better, Should have Signal to noise ratio less then 104dB or better, RF output Power of 10/40mW or better, Should have maximum 24 set can be used simultaneously by using multiple frequency bands in one venue, Should have die cast metal body .Microphone element should unidirectional capsule or better complete with standard accessories required as per tender. Make: Erthpot/Beyerdynamic/Clockaudio/BOSCH/Televic
219	SITC of Single Channel Wireless Handheld Microphone system with Built in AFS(Automatic Frequency Selection) technology,Should have UHF operating mode with Frequency range of 522 -930Mhz or better, Should have operating bandwidth 134 MHz or better, Anti Interference technology ensures Noiselock Squelch effectively blocks Stray RF or better, Microphone Frequency Response of 45Hz to 18KHz or better, Should have Signal to noise ratio less then 104dB or better, RF output Power of 10/40mW or better, Should have maximum 24 set can be used simultaneously by using multiple frequency bands in one venue, Should have die cast metal body, Microphone element Dynamic or better complete with standard accessories required as per tender. Approve Make: Erthpot/Beyerdynamic/Clockaudio/BOSCH/Televic
220	SITC of Digital Signal Processor with min. 08AEC enabled Mic/Line inputs, 08 Line outputs or better , Input channel processing should include Pre amplifier, Signal generator, Expander, Compressor, 10 band Parametric EQ or better, Output Channel processing should include 31 band Graphic equalizer, Delay, Crossover, limiter or better, Other features should include Automatic mixing console, Ducker, Feedback elimination, Noise elimination, echo elimination or better, Should have built-in Bi directional USB for Software based VC as well as for playing digital audio, Should have built in Camera tracking Module, 8 Port Freely configurable GPIO or better with Analog/Digital dynamic range of 114dB or better, Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz or better, per channel phantom power module or better. Should be configurable thru software. Make: Erthpot, Beyerdynamic, Clockaudio
221	SITC of the Parameter Controller is designed for precise adjustment of processor volume, application scene switching, and mixing matrix control, enabling customization to meet specific application requirements. It supports custom programming based on the actual usage environment for optimized performance. The unit is powered via a PoE switch, eliminating the need for separate power supplies or custom cabling, ensuring simplified installation and reliable operation. Make: Erthpot/Beyerdynamic/Clockaudio/BOSCH/Televic
222	SITC of Class AB output circuitry Dual channel power amplifier, 2x400 watt at 8Ω, 2x600 watt @ 4Ω, 1200 watt @ 8Ω bridge mode, THD @ <1% or less, Damping factor >300, S/N Ratio (20Hz - 20kHz) at 101 dB, 700 watt Input power, Frequency response 20Hz - 20kHz, ±0.5dB, Protection from Short circuit, output DC, thermal, RF protection, Clip, Front panel Protect and Signal LED indicators, 42 detent rotary vol control, Rear panel controls 3 position Slide switch for Mode - Dual, Mono, Bridge. 3 position Slide switch for Sensitivity – 0.775V, 1 V and 1.4V, Output connectors/channel Twist-lock connector and binding post, Fan cooling.Make: Meyer Sound/Sonodyne/d&B Audiotechnik
223	SITC of 2 way Coloum Speaker with 1x1\\" dome twitter, 4x3\\" PP woofer, having normal impedence of 4 ohm and sensitivity of 93 dB and frequency response of 150 Hz- 15kHz and program power of 80W.Make: Meyer Sound/Sonodyne/d&B Audiotechnik
224	(I) SH: CONTROL SYSTEM ACCESSORIES:- SITC of AV Control processor for controlling audio & Video equipment’s. The supplied AV controller should be capable of controlling AV equipment of multiple rooms simultaneously ( upto 10 Rooms). Should have minimum 2 GB RAM, Flash 8 GB & External Storage Supports up to 1 TB to load files and processing. Should have minimum 1x Bidirectional RS-232/422/485 port, 2x Bidirectional RS-232 port, 8xIR/1-way serial, 8x relay supporting 1A, 30VAC/VDC, and 8x digital IO ports. Should support BACnet communication protocol from day one, for providing direct interface to third party building management systems over Ethernet, simplifying integration with HVAC, security, and other systems. (Additonal hardware can be added to meet the requirement). Control processor & Touch Control interface should be from same OEM, and must not require any internet connectivity for configuration, programming and running. Should have ethenet port supporting 1000 Mbps, industry-standard TCP/IP, UDP/IP, SFTP, DHCP, SSL, FIPS 140-2 compliant encryption, SNMP, SMTP, IPv4 and IPv6. Should support industry standard minimum security features and protocols using Active Directory® credential management, 802.1X authentication, TLS, SSH, and HTTPS. Should comply to CE, UL, FCC & BIS. Make: Crestron/Extron/ Kramer
225	SITC of Mobile App compitable with Controller
226	Supply, Installation, Testing and Commissioning of 10.2\\" (diagonal) CONTROL PAD MONITOR with LED-backlit Multi‑Touch display with IPS technology or better ,Touch ID fingerprint sensor,Wi-Fi (802.11a/b/g/n/ac); dual band (2.4GHz and 5GHz). HT80 with MIMO Bluetooth 4.2 technology.Ambient light sensor.Native resolution of 1620 x 2160-pixel. Make: Apple/ Crestron/Kramer
227	SITC of of Wireless charger for IPAD with following features : should me mounted on table top, with its power supply unit, or PoE+, colour - White and Case for IPAD - compatible for iPad 10.2-inch (7th, 8th, 9th gen), colour - White.Make: Apple/Crestron/Kramer.SITC of of Wireless charger for IPAD with following features : should me mounted on table top, with its power supply unit, or PoE+, colour - White and Case for IPAD - compatible for iPad 10.2-inch (7th, 8th, 9th gen), colour - White.Make: Apple/Crestron/Kramer.
228	SITC of Access Point Electroabsorption Moudlated Isolated Laser Module (EM-ILM) for Ultralong-Reach Applications Electroabsorption Modulated Isolated Laser Module (EM-1LM) for Ultraong-Reach Applications. Make: Cisco, Dlink, TP-Link
229	SITC of 8 PoE+ ports with 123W total power budget, and includes NETGEAR FlexPoE allowing to reduce the power budget to 83W or even 60WNetwork mute button PoE powered through PoE, LED status ring with configurable colors and brightness, Button should have function toggle, push to talk and push to mute. IPX1 rated Power Consumption 2 W, max Operating Temperature Range −6°C to 40°C. Make: Netgear/Dlink/TP Link
230	(J) SH: CAMERA AND SOFT VC SOLUTION:- SITC of AI based Full HD 1080p @ 60fps Presenter PTZ Tracking Camera with Dual Camera- one PTZ Camera for Presenter Tracking and second fixed lens Panoramic Camera. PTZ Presenter Camera should support min 12x Optical Zoom and 12x Digital Zoom with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 72 Degree and for Panoramic Camera min. 100 Degree, camera should support simultaneous outputs through HDMI, USB 3.0 and IP with 1x Audio In and can be controlled via RS232 and IP. Should support multiple video streams with PIP. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE and Virtual USB Driver.Camera can be controlled and managed through centralised software on network. Quoted model should be BIS, CE, Clickshare,FCC & RoHS Certified with Test Lab Reports. Make: Lumens/Crestron/Aver
231	SITC Of 4K Ultra HD to USB 3.0 with HDMI loop and VISCA port supports ultra HD 4K,1440p,1080p,1080i,720p,480p and 576p video formats. HDMI audio support-embedded audio in the HDMI signals are extracted and output as two-channel LPCM. Customize able video processing functions powered from USB 3.0 port Computable with Windows, Mac OSX,Linux and Android. Make:-Aten,Milestone,Innogeni.
232	(K) SH: CABLES AND CONNECTORS:- SITC Of 24 AWG stranded (27x38) Microphone cable or better ,High-conductivity bare copper conductors or better , Should have PVC insulation, Should have PVC jacket, Operating Temperature Range: -30°C To +60°C or better , Non Plenum. Make : Extron , AMX , Belden .
233	SITC Of Multi-Conductor - High-Conductivity Copper Speaker Cable, Twisted Jacketed Connector, 14 AWG stranded (42x30) tinned copper conductors, PVC insulation, PVC jacket., Operating Temperature Range : -20°C To +90°C or better , NEC/(UL) Specification: CL3 or better , AWM Specification : UL Style 2587 (600 V 90°C) or better , CSA Specification : FAS90 or better, EU Directive 2011/65/EU (ROHS II) compliant or better, EU RoHS Compliance or better. Make : Belden , Klotz , Eurocable.
234	SITC OF Plug Should be provided with shielded twisted pair for devices transmitting and receiving signal over twisted pair; should be high performance Category 6A RJ-45 plug, metal strain relief and ground bonding, suitable for high EMI/RFI environments, should be compatible with TIA/EIA 568A/B wiring standards, Conductor alignment guide should reduce crosstalk and signal interference, should have Gold plated contacts.Make:-,Extron,Christie, RGB.
235	SITC Of 9U AV Equipment Rack ,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength,,Top cover ventilated on all sides along the width and depth thereby enhancing exhaust of hot air,Cable entry provision is both at the top and bottom covers with 35mm round cable entry point, the cable entry provision comprising of a gland plate with cable entry points in round cut outs edge protected with rubber grommets,Castor – 4 Nos. of heavy duty castors to take care of heavy load bearing capacities are provided, Earthing Strip – Copper strip to take care .OEM Authorization Format(Tender Specific) to be attached for authenticityof the grounding. Make:NT/VALRACK/WQ
236	SITC of 4 Pairs Shielded Twisted Pair screened with tinned copper braiding (S/FTP) Cable. Conductor Metal: 23 AWG Solid Bare Copper or better. Shield Individual Pair: Aluminum/Polyester Foil or better. Screened: Tinned Copper Braiding or better. Color Code: Grey or better. Jacket Material: PVC or better. Cable Diameter : 8.0mm Nominal or better. Verified compliant with TIA/EIA-568C.2 standards by ETL or better. CUL listed or better. RoHs compliant or better. Supports Gigabit Ethernet (1000 baseT) standard or better.Make : Extron , Crestron , D-Link
237	SITC Of 12U AV Equipment Rack ,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength,,Top cover ventilated on all sides along the width and depth thereby enhancing exhaust of hot air,Cable entry provision is both at the top and bottom covers with 35mm round cable entry point, the cable entry provision comprising of a gland plate with cable entry points in round cut outs edge protected with rubber grommets,Castor – 4 Nos. of heavy duty castors to take care of heavy load bearing capacities are provided, Earthing Strip – Copper strip to take care .OEM Authorization Format(Tender Specific) to be attached for authenticityof the grounding.Make:NT/VALRACK/WQ Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tripura Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Upgradation Of Training Institute Infrastructure Under Element Project At Tripura State Forest Academy(Tsfa), Hatipara, Gandhigram / Providing Electrical Installation Works Including Supply, Installation, Testing & Commissioning Of Dg(Dies, Tripura-Tripura

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Upgradation Of Training Institute Infrastructure Under Element Project At Tripura State Forest Academy(Tsfa), Hatipara, Gandhigram / Providing Electrical Installation Works Including Supply, Installation, Testing & Commissioning Of Dg(Dies, Tripura-Tripura

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us