|
| 1 | S.H: CIVIL ITEMS:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 2 | Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead up to 50 m and lift up to 1.5 m :All kinds of soil |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix) |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in lime mortar |
| 5 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 6 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. |
| 7 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 |
| 8 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 9 | Providing and applying primer coat with bitumen emulsion SS1 grade conforming to IS:8887 on prepared surface of Granular Base including clearing of surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means complete in all respects as per direction of Engineer-In-Charge. The contractor shall quote his rates assuming quantity of bitumen emulsion as 0.70 Kg/Sqm. If the actual quantity of bitumen emulsion varies from the quantity assumed above, necessary cost adjustment for deviation in the quantity of bitumen emulsion shall be done as per rate in actual supply voucher from nearest refinery at the time of execution. The rate of bitumen emulsion exclusive of GST shall only be considered for payment. |
| 10 | Providing and applying tack coat using bitumen emulsion (Rapid setting) complying with IS:8887, spraying the bitumen with mechanically operated spray unit at the rate specified below, cleaning and preparing the existing pavement surface as per specifications complete in all respects as per direction of Engineer-In-Charge. If the actual quantity of bitumen varies from the quantity specified, necessary cost adjustment for deviation in the quantity of bitumen shall be done as per rate in actual supply voucher from nearest refinery at the time of execution. The rate of bitumen exclusive of GST shall only be considered for payment.(a). 0.30 Kg/Sqm on existing concrete surface |
| 11 | Providing and applying tack coat using bitumen emulsion (Rapid setting) complying with IS:8887, spraying the bitumen with mechanically operated spray unit at the rate specified below, cleaning and preparing the existing pavement surface as per specifications complete in all respects as per direction of Engineer-In-Charge. If the actual quantity of bitumen varies from the quantity specified, necessary cost adjustment for deviation in the quantity of bitumen shall be done as per rate in actual supply voucher from nearest refinery at the time of execution. The rate of bitumen exclusive of GST shall only be considered for payment.(a). 0.20 Kg/Sqm on existing bituminous surface |
| 12 | Providing and laying of Hot Mix Dense Bituminous Macadam (DBM) using crushed stone aggregate of quality, size and grading as specified and filler as specified and Viscosity Grade Bitumen (supplied in bulk) in proportions as per job mix formula and laid to specified levels, grade and camber as per specification, drawings and as directed by the Engineer-in- Charge including compacting with 8-10 tonne, preferably vibratory road roller of adequate capacity to achieve the specified values of compaction, strength, surface accuracy complete [for tendering purpose VG bitumen of grade (VG-30) shall be taken as 110 kg/m3 of mix supplied in bulk produced by Govt. Refineries and 2% hydrated lime by weight of aggregates as filler material]. |
| 13 | Providing and laying of Hot Mix Semi Dense Asphaltic Concrete (SDAC) using crushed stone aggregate of quality, size and grading as specified and filler as specified and Viscosity Grade Bitumen (supplied in bulk) in proportions as per job mix formula and laid to specified levels, grade and camber as per specification, drawings and as directed by the Engineer-in- Charge including compacting with 8-10 tonne, preferably vibratory road roller of adequate capacity to achieve the specified values of compaction, strength, surface accuracy complete [for tendering purpose VG bitumen of grade (VG-30) content shall be taken as 120 kg/m3 of mix supplied in bulk produced by Govt. Refineries and 2% hydrated lime by weight of aggregates as filler material] |
| 14 | S.H: ELECTRICAL ITEMS:Supply of LED street light luminair having efficiency of LED light fitting (Efficacy) not less than 110 lumens/watt,lumen output not less then 2200 lumens with lenses consisting of pressure die cast/extruded aluminum housing,heat resistant toughened glass/ polycarbonate cover, IP category >=65, IK rating >=07 with surge protection greater then 4KV suitable for operation on 140V-270v, 50 Hz AC supply with all accessories complete as required & as specified. |
| 15 | Supply of 1.1 KV grade Aluminium conductor XLPE insulated, PVC sheathed armoured cable of size as per IS 7098(part 1) amended upto date.(a) 4C X 10 Sq. mm |
| 16 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade as required(a) 4C X 10 Sq.mm |
| 17 | Supply & fixing of surface/wall/pole mounted anticorrosive and chemical resistant cable junction box made of totally insulated and environment friendly recyclable thermoplastic of size 200mm x 160mm x 98mm ( Hensel k 9250 or equivalent ) having internally embedded gasket and elongated holes for adjustment and various arrangement for terminal mounting and dust toprevent ingress from back side suitable to accommodate incoming and outgoing cables complete as required,duly fitted with 32 Amp heavy duty connector for loop in loop out of twonumbers 4C X 10 sq. mm cables including providing & fixing of one number 2A DPMCB of 10kA breaking capacity necessary earthing arrangements making connection etc as required. |
| 18 | Supply of following size multicore round PVC Insulated and FR PVC round sheathed copper conductor flexible industrial cable of 1100 volts grade conforming to IS:694 as amended upto date etc. complete as required.(a) 3C X 1.5 Sq. mm |
| 19 | Supply of following size multicore round PVC Insulated and FR PVC round sheathed copper conductor flexible industrial cable of 1100 volts grade conforming to IS:694 as amended upto date etc. complete as required.(b) 3C X 2.5 Sq. mm. |
| 20 | Supply and Fixing of 40mm dia x 2.00 mtr long GI pipe (medium class) bracket for mounting of LED street Light Fitting on pole/wall/surface including bending the pipe to the required shape, 1 nos 40mm x 3mm flat iron clamps with nut bolts and washers, painting the flat iron with primer and finish paint etc. as required. |
| 21 | Installation, testing and commissioning of LED street light fitting with all accessories on existing street light pole/bracket upto 3 mtr height with minimum 300 mm long bracket, includingsupplying and drawing of 3 core 1.5 Sq.mm. PVC insulated PVC sheathed flexible copper conductor cable from loop-in-loop-out box upto the including streetlight fitting(s), connection etc. complete as required |
| 22 | Laying and fixing of one number PVC insulated PVC sheathed/XLPE power cable of 1.1 KV grade of size upto 35 sq. mm on wall surface complete as required (clamped with 1 mmthick saddle) |
| 23 | Dismantling of the existing 3 mtr. High Octagonal Street light pole along with existing street light with complete acccessories like removing LT cables, MCB, demolition of base and levelling it and transportation of the cables, pole, street light fittings from site to designated location at New Power House the complete etc. as required. Please Enable Macros to View BoQ information |
