|
| 1 | Schedule-A |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge. |
| 3 | All as per Item No 1.01 but exceeding 1.50 sqm each and n.exc. 4 Sqm each complete all as specified and directed by Engineer-in-Charge. |
| 4 | Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each , complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F 35 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both the faces.complete all as specified and directed by Engineer-in-Charge. |
| 6 | Taking Down of old shutter exc 1 sqm and n exc 2 sqm each including ,easing and adjusting and refixing in same opening complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking Down of old steel shutter Welded steel wire fabric exc 1 sqm and n exc 2 sqm each ,easing and adjusting and refixing in same opening repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of fittings and refixing on the same opening complete all as specified and directed by Engr-in-Charge. (Note:- New hinges, if required will be measured and paid under separate item). |
| 8 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,& incluing taking down of old window of any description ,complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F in repair Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F in repair Anodised aluminium window and ventilator shutters, side hung type or sliding without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing mentioned in SSR, complete all as specified and directed by Engr-in-charge. |
| 12 | S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and complete all as specified and directed by Engr-in-charge. |
| 13 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 50x75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Dismantling structural steel work incl. steel door,gate,window guard bars,grills etc.complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L fabricated frame work as in doors of gate of angle iron or other section with gusset plate rails, braces etc. complete drilled for fixing steel sheeting or other covering door etc to be prepared for hanging with and including hinges .complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for mild steel works as in grills and railing of Fe-410-0or Fe 310-0,complete all as specified and directed by Engineer-in-Charge. |
| 18 | M& L Pressed steel frames size 105x60mm for door with one or more rebates including necessary fixing lugs,hings,lock strike plate etc, complete specified and directed by Engineer-in-Charge. |
| 19 | S & F for Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly). |
| 20 | S&F in repair 18/19 mm thick prelaminated particle board exterior gde prelaminated one side with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F in repairs 100 mm long,designer pattern Stanless Steel handles for fixing in cupboards complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F in repair, Magnet catch for fixing in cup board complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repars 75 mm long aluminium alloy butt hinges complete all as specified and directed by Engineer-in-Charge. |
| 24 | Taking down old Aluminum windows of any description size not exc. 2.50 sqm and M&L for complete overhauling of the glass pane/rubber beeding/aluminum glazing clip if necessary/locking system incl.necessary roiling and adjustment etc and refixing in same location complete all as specified and directed by Engineer-in-Charge. Note :- Glass Pane/rubber beeding/aluminum beeding will be measured and paid separately under subsequent items. |
| 25 | S & F in repair rubber beeding to be fixed over glass panes in Aluminum widows complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F in repair, aluminum anodised glazing clip to the alumiinum window frames after fixing the glass panes complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L PCC for 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching & for fixing railing, holdfast etc complete all as specified and directed by Engineer-in-Charge. |
| 28 | Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F Figured Glass pin head type 4.0mm thick, fixing to Aluminium Sections as in Panel of Doors, Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc., as required/ordered at Site(s), complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F Sheet Glass ordinary 4.0mm thick, fixing to Aluminium Sections as in Panel of Doors, Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc., as required/ordered at Site(s), complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in repair for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apoerture 1.40mm and fixed with aluminium/wooden/steel beads complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repars MS/SS medium weight cold rolled butt hinge ISI Marked 100mm size, fixed with screw complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F in repairs, MS Helical door spring 300 mm long complete all as specified and directed by Engineer-in-Charge.(Helical spring will be fixed by welding) |
| 34 | S&F butt hinge stainless steel 100/150mm size , fixed with stainless steel screw complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in repais extruded anodised aluminum alloy handle 150mm long fabricated type , complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F anodised aluminum barrel tower bolt of extruded section 150mm long, complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repars aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F Mild steel tower bolts,enamelled black,with bright bolt and fixed 150mm fixed. |
| 39 | S&F 125 mm long mild steel handles, cast type polished bright |
| 40 | S&F S S mild steel sliding door bolt 300 mm longth with sand die cast brass hasp staple bolt type and fixing bolt complete all as specified and directed. |
| 41 | S&F telescopic drawer channel 18\\" long complete all as specified and directed by Engineer-in-Charge. |
| 42 | S & F in repair floor door stopper of size 140 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring incl cleats etc fixed to door.complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F in repairs 25mm dia stainless steel curtain rods including cutting and fixing complete all as specified and directed by Engineer-in-Charge. |
| 44 | S& F in repairs Stainless Steel wall bracket suitable for 25mm dia curtain rods, complete all as specified and directed by Engineer-in-Charge. |
| 45 | S& F in repairs Stainless Steel designer pattern side knobs suitable for 25mm dia curtain rods complete all as specified and directed by Engineer-in-Charge. |
| 46 | M&L preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 47 | M&L preparation of new or previously steel surfaces of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primercomplete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in repairs aluminum door seal fixed to bottom of door shutters complete all as specified and directed by Engineer-in-Charge. |
| 50 | Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s),complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for 10 mm thick rendering in CM 1:3 on concrete/gunniting surfaces as in ceiling mixed with integral water proofing compound , the surface shall be cured and allow to dry, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.. |
| 52 | M&L for 15 mm thick rendering in CM 1:6 on brick/concrete surfaces of wall, mixed with integral water proofing compound, the surface shall be cured and allow to dry, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. |
| 53 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using WPC 2% of weight of cement and finishing even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid saperatly). |
| 54 | Supply only integral water proofing compound. |
| 55 | M&L for preparation of newly plastered surfaces of walls by Vacuum based sanding machine complete all as specified, applying wall care putty min 2mm thick (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured including primer by auto roller complete complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L for preparation of newly plastered surfaces of ceiling by Vacuum based sanding machine complete all as specified, applying wall care putty 2mm thick (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured including primer by auto roller complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L for preparation for newly plastered surface of wall and applying two coat of cement base paint over a coat of primer on walls complete all as specified and as directed by Engineer-In-Charge. |
| 58 | M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, roof kerbs or mud stop, coping, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified. |
| 59 | M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services) |
| 60 | M&L for Ceramic coloured/ printed non-skid tiles of size 7-8 mm thick( square / rectangular ) area of each tile exceeding 0.11 Sqm but n. exec. 0.18 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles & including Dismantling of old Ceramic coloured/ printed non-skid tiles of any thickness including cement morter bedding (but not backing), removing serviceable tiles to the stores and rubbish off the premises.complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L Glazed Ceramic Coloured Tiles, 450x350x7mm thick, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick screed bed in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, & including Dismantling of old Ceramic coloured/ printed non-skid tiles of any thickness including cement morter bedding (but not backing), removing serviceable tiles to the stores and rubbish off the premises.complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mena radius built in cement mortar 1:4 including Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar, complete all as specified and directed by Engineer-in-Charge. |
| 63 | M&L for 20mm thick pre polished granite (any colour) slab laid with 15 mm thick CM 1:4 bedding in door Chowkhat/Frame, Window Cill, plateform etc in floor and skirting/dado surface and jointed with grey cement slurry and pointed in white cement with pigment to match the shade of granite stone including Moulding/rounding and polishing & dismantling of the old stone and tiles of any description or thickness complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F in repair, Hollow PVC Wall Lining consisting of 05 to 10 mm thick Plain colour PVC sheet inclusive of solvent cement & fixing on wall surface L & U channel ,including dismantaling of pvc sheet as per specification & drawing complete all as specified and as directed by Engineer- in- Charge. |
| 65 | Removal , collection,loading transportation and disposal of debris/malwa from each and every building, shafts,common areas and all connected/approach area,includig lifting from scattered locations, stacking, loading into tractor trolley shall be of minimum size 3.0 m x 1.5 m x 0.90 m (LXBXH) or distance exc 5 Km but n exc 10 Km and deposited out side the MD land. Note :- Searching of Place of Disposal out side the MD Land will be the responsibility of Contractor and rate of any distance shall be included in quoted unit rate. |
| 66 | Note :- (i) The amount of Rs 106400.00 against Schedule of Credit on Srl Page 146 shall be deducted from the total amount quoted against Sch 'A' (ii) For Serial No 1 to 64 The Work will be carried out in (G+10) Storey buildings. Please Enable Macros to View BoQ information |
