|
| 1 | Repair of Almirah Large steel with Shelves & 1/2 S x 1/2 H complete all as shown in drawing and as directed.(Drg No. - FD-67, FD-243 & FD-1031, FD-1033) |
| 2 | Base made out of 1mm thick MS Sheet channel with ends covered into required shape |
| 3 | Brass lock 50mm 4 lever with duplicate keys approved quality |
| 4 | MS Handle Cromium plated |
| 5 | MS Hinges 75 mm duly painted |
| 6 | MS Clit without bolts |
| 7 | Locking arrangement complete set of 8mm round MS Rod |
| 8 | Supply and fixing of Shelves |
| 9 | Refixing of existing serviceable door/ Shelf with necessary welding as required |
| 10 | Hanging rod of mild steel chromium plated 1.6mm thick for Almirah Large steel 1/2H x 1/2S |
| 11 | Welding spots where as required in repair |
| 12 | Repair of Almirah Medium Steel with Shelves & 1/2H x 1/2S (Drawing No FD-1032, FD-1034/FD114(M) |
| 13 | Base made out of 1mm thick MS Sheet channel with ends covered into required shape |
| 14 | Brass lock 50mm 4 lever with duplicate keys approved quality |
| 15 | MS Handle Cromium plated |
| 16 | MS Hinges 75 mm duly painted |
| 17 | MS Clit without bolts |
| 18 | Locking arrangement complete set of 8mm round MS Rod |
| 19 | Supply and fixing of Shelves |
| 20 | Refixing of existing serviceable door/ Shelf with necessary welding as required |
| 21 | Hanging rod of mild steel chromium plated 1.6mm thick for Almirah Med steel 1/2H x 1/2S |
| 22 | Welding spots where as required in repair |
| 23 | Repair of Locker Bed Side steel complete all as shown in drawing and as directed. (Drg No. - FD-257 & FD-1029) |
| 24 | Base made out of 1mm thick MS Sheet channel with ends covered into required shape |
| 25 | Brass lock 50mm 4 lever with duplicate keys approved quality |
| 26 | MS Handle Cromium plated |
| 27 | MS Hinges 75 mm duly painted |
| 28 | MS Clit without bolts |
| 29 | Locking arrangement complete set of 8mm round MS Rod |
| 30 | Supply and fixing of Shelves |
| 31 | Refixing of existing serviceable door/ Shelf with necessary welding as required |
| 32 | Hanging rod of mild steel chromium plated 1.6mm thick for Almirah Large steel 1/2H x 1/2S |
| 33 | Welding spots where as required in repair |
| 34 | Repair of Book Case Steel (Drg No FD-1028) |
| 35 | Base made out of 1mm thick MS Sheet channel with ends covered into required shape |
| 36 | Brass lock 50mm 4 lever with duplicate keys approved quality |
| 37 | MS Handle Cromium plated |
| 38 | Refixing of existing serviceable door/ Shelf with necessary welding as required |
| 39 | Welding spots where as required in repair |
| 40 | Repair of GI Charpoy Pipe 32 mm with hardtop /plywood top as shown in drawing No. FD-220. |
| 41 | Supply & fixing of 7 layer 12mm BWR ISI marked plywood of size 6’6”x3’ all as per drawing and directed by Engr in Charge. |
| 42 | Supply & fixing of three M S square pipe 25mm x 25mm iron stiffener into the exiting gaps between long rails which may vary in each case (one in the centre & other two at 6” distance from each short rails) by welding ensuring that the stiffeners fit tight against the inner walls of both long rail. Care must be taken to ensure that stiffeners & upper crest of GI pipe long rails are at same level |
| 43 | M&L for dismantling of u/s GI long rail of 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI long rail of 32 mm dia medium grade ISI marked both end threaded and fixed all as shown on drawing. |
| 44 | M&L for dismantling of u/s GI short rail of 32 mm dia from charpoy GI pipe 32 mm dia, providing by cutting, threading both end and forming of short rail from retrieved of 32 mm dia GI long rail obtained from item Sl No 5.03 above and all as shown on drawing. |
| 45 | M&L for dismantling of u/s GI leg 32 mm dia from Charpoy GI pipe 32 mm dia, providing by cutting, threading one end and forming of leg from retrieved 32 mm dia GI Long Rail/short rail obtained from item No 5.03 and 5.04 Welding of 3 mm thick 50 mm dia MS plate to the bottom, face of the leg & 25 x 3 mm flat iron made to shape and size of clamp with 16 guage washer at the bottom of clamp for fixing MNF set incl rest as shown on drg. |
| 46 | S & F in replacement of UNSV GI elbow 3 way of 32 mm dia from charpoy GI pipe 32 mm dia, medium grade with ISI marked shall be provided and rest as shown on drawing. |
| 47 | S & F in replacement of UNSV GI check nut 32 mm dia from charpoy GI pipe 32 mm dia 6 mm thick of best quality as approved by GE and rest as shown on drawing. |
| 48 | Supply and replacement of Hardwood blocks made out of 1st Class hard wood. |
| 49 | Repair of Charpoy GI Folding (Drg No FD-388) |
| 50 | S&F in repair removing of unserviceable plywood from charpoy GI folding and replacement with new new plywood 12mm thick as per IS:303 BWR grade make (Archid/ Century /Greenply) of size 6' to 6 ½' x3' (cut to suitable size to charpoy GI pipe folding) fixed with suitable type of screws and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 51 | S & F Hard Rubber Shoes for Charpoy legs as per Drg |
| 52 | Repair of Chair verandah complete all as shown in drawing and as directed. (Drg No. - FD-19 & FD-256) |
| 53 | Welding of broken legs joints and other joints of chair varanda where as required in repair. |
| 54 | Removing unserviceable plastic cane & including re-canning in true Godrej pattern with 1st quality 4 mm wide and half round oval shape virgin plastic cane of white colour. The border of seat / back shall be weaved with 4 mm wide 1st quality virgin plastic cane (white colour) complete all as specified and directed:- Note: The re-canning shall be carried out only after finishing painting of item as required. |
| 55 | S & F Hard Rubber Shoes for legs of chair varandah as per Drg |
| 56 | Repair of Chair CB with / without arms complete all as shown in drawing and as directed. (Drg No. - FD-75) |
| 57 | Welding of seat frame with legs of chair CB without arms. |
| 58 | MS flat iron 25 x 3 mm of 50 mm length and including welding & spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 59 | Seat frame made out of teak wood and including two coats french polish and canning for chair CB with/ without arms complete. |
| 60 | Back frame made out of teak wood and including two coats french polish and canning for chair CB with/ without arms complete. |
| 61 | Arm rest made out of teak wood and fixed with screws and including two coats french polish for chair CB with arms complete. |
| 62 | Fixing only existing serviceable arms with new screws and including one coat french polish for chair CB with arms complete. |
| 63 | Hard rubber shoes |
| 64 | Welding spots where as required in repair |
| 65 | Repair of Table 900 x 600 (3'x2') with/ without Drawer Steel (Drg- FD-1008 & 1007) |
| 66 | Supply and replacement of table top : Supply and replacement of top made out of 18 mm thick prelaminated particle board as per drg. |
| 67 | Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 68 | Long rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 69 | Short rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 70 | Drawer and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 71 | Locks with duplicate keys |
| 72 | Supply and replacement of hard rubber shoes : Hard rubber shoes shall be of superior quality. |
| 73 | Repair of Table 3' x 3' steel (Drg - FD-1009) |
| 74 | Supply and replacement of table top : Supply and replacement of top made out of 18 mm thick prelaminated particle board as per drg. |
| 75 | Supply and replacement of hard rubber shoes : Hard rubber shoes shall be of superior quality. |
| 76 | Repair of Table Dining OR's Aluminium Top (Drg - FD-165 (M) |
| 77 | S&F of leg made out of square pipe 25mm having wall thickness 1.6mm complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 78 | M&L for welding of broken joints of Table Dining OR's complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 79 | S & F Top of the table dining OR,s made out of 18mm thick plywood BWR with 22 gauge aluminium sheet of top, rest all as shown on drg and as directed by Engr-in-Charge. |
| 80 | S&F Hard PVC/rubber toes of superior quality as specified and as directed by Engr-in-charge. |
| 81 | Repair of Table Officers Steel complete all as shown in drawing and as directed. (Drg No. - FD-1003) |
| 82 | Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 83 | Long rail made out of 25 x 40 x 1 mm mild steel 'U' section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 84 | Short rail made out of 25 x 40 x 1 mm mild steel 'U' section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 85 | Small Drawer including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 86 | Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete. |
| 87 | Drawer Lock with duplicate keys |
| 88 | Hard plastic shoes. |
| 89 | Repair of Table Clerk Steel complete all as shown in drawing and as directed. (Drg No. - FD- 84 & FD-381, FD-1004):- |
| 90 | Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 91 | Long rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 92 | Short rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 93 | Drawer and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. |
| 94 | Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete. |
| 95 | Drawer Locks with duplicate keys |
| 96 | Hard plastic shoes |
| 97 | Repair of Teapoy verandah complete all as shown in drawing and as directed. (Drg No. - FD-383) |
| 98 | Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete. |
| 99 | Hard rubber shoes |
| 100 | Welding in joint of the Legs and Frame of Teapoy Verandah alongwith supply and fixing of MS Cleat where ever required all as per drawing and directed. |
| 101 | Removal of existing worn out paint from inside & outside including preparation of surface complete of the folloeing steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke gray/ Olive green/white over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 102 | Almirah Large Steel with Shelves & 1/2H x 1/2S |
| 103 | Almirah Medium Steel with Shelves & 1/2H x 1/2S |
| 104 | Book Case Steel |
| 105 | Chair CB with/ without Arms Steel |
| 106 | Locker Steel |
| 107 | Table Office Officer Steel |
| 108 | Table Office Clk Steel |
| 109 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
