|
| 1 | Supply and fix in replacement electronic driver with power factor correction suitable for 45/50/60 Watt LED street lights, input AC 85-300V, input frequency 50/60 Hz, output voltage DC 22-38V, output current 1500mA (+-) 5%, waterproof level :IP 65, shell material : aluminium with IS 15885, complete all as specified and as directed. |
| 2 | Supply and fix in replacement electronic driver with power factor correction suitable for 70-90 watt LED street lights, input voltage 70V AC to 300 V AC , power factor 0.99 (Unity) , over voltage 300 V cutt off , short and open circuit protection isolated, surge protection up to 10 to 12 Kv, maximum output voltage 55 Kv, maximum current up to 1.5a waterproof level :IP 65, shell material : aluminium with IS 15885, complete all as specified and as directed. |
| 3 | Supplying fixing in repair connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 90 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 complete all as specified and directed. |
| 4 | All as item No. 3 Above but of size 70 Watt. |
| 5 | All as item No.3 Above but of size 60 Watt. |
| 6 | M&L for preparation of old painted surfaces of erected steel tubular swaged poles / Rails/Girder poles of LT over head line ( Except embedded portion) , 9 M long including all MS work mounted on pole , earth protection & water pipe ( if exists) and providing one coat of aluminium paint and providing 04 Nos bands/ straps with two coats of Retro Reflective paint ( black ,yellow and red 30 cm wide each) from top of plinth block complete all as specified |
| 7 | Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, all as specified and directed. |
| 8 | Supply and fixing in repair of automatic street light control switch single phase 5-8 KW 40 Amps using infrared sensor based nature switch for automatic switching of street lights. Nature switch operation should be based on Natural light lux level. The sensor along with suitable power contactors and incoming out going MCBs should be enclosed pole/wall mounted thermo plastic polycarbonate enclosure conforming to IP 66 protection class 2.Make: Nature switch: Kakatiya Energy systems/BAJAJ/HealerContactors: BCH/L&T/SchneiderMCBs: Hager/Schneider/L&TEnclosure: Hensel/GE or equivalent in indoasianCircuit wiring: Polycab/ Finolex or equivalent in indoasian |
| 9 | Supply and fix in replacement integrated auxiliary contactor 65 Amps, AC 3 phase, 220 to 415 volt, 50/60 Hz, three/four pole, contacts 2NO+2NC conforms to IEC/EN -60947-4-1 suitable for street light timer panels, complete all as specified and directed .Make:- Havells Cat No. IHPHA065300W , Legrand Cat No. 416146 or equivalent in C&S. |
| 10 | Supply and fix in replacement integrated auxiliary contactor 40 Amps, AC 3 phase, 415 volt, 50/60 Hz, three pole contacts 1NO+1NC conforms to IEC/EN -60947-4-1 suitable for street light timer panels, complete all as specified and directed .Make:- Havells Cat No. IHPBC040100, Legrand Cat No. 416111 or equivalent in C&S. |
| 11 | Supply and fix in replacement street light panels analog time switch (with battery back up), 3P Module, 24 hours program, programmable every 15 min, current capacity 16 Amps, suitable for 63/40/32 Amps street light timer, AC 3 phase, 110-240 V AC (1CO) base/ Din 16 pulse digital time switch,complete all as specified and directed .Make:- Indoasian Cat No. TA925450, L&T Cat No. WT2DCDS or equivalent in Scheneider. |
| 12 | Supply and fixing PVC insulated copper cable 2.5 sqmm three core multi stranded flexible 1100 volts complete all as specified and directed |
| 13 | S & F as in replacement brackets 1.2 m long made to shape fabricated out of GI pipe Light grade ISI marked 40 mm dia incl provn of socket nipple welded at once end to suit the light fitting and fix to pole including clamps with nuts and bolts of suitable size cutting, drilling and welding its fix to pole and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed |
| 14 | Supply and fixing street light junction box of size 300 mm x 200 mm x 100 mm, made out of hot press moulded SMC with weather proof hinged door including self locking arrangement, out door type, IP-55, weather and vermin proof complete comprising of insulated / high quality PVC sleeves aluminium bus bar of capacity 63 Amps 04 Nos (three phase RBY and black for neutral) with and including 6 Apms MCB single pole, single phase 230 volts, including 25 x 3 mm flat iron mounted on insulators, having arrangement of connecting incoming and outgoing cables complete and all as specified and directed. |
| 15 | Suppy and fix rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. |
| 16 | Inspection and Servicing of DG set upto 10 KVA Make- Kirloskar, including replacement of following parts alignment of Alternator, Minor reapir and complete checking of fuel Pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):- |
| 17 | Supply only Filter kit comprising of Air,Fuel and oil filters |
| 18 | Supply only Fan Belt as per sample |
| 19 | Dismantling Radiator assy complete including cleaning, washing with cleaning equipment and refitting the same complete all as specified and directed. |
| 20 | Supply & filling and topping up Engine oil of suitable grade. |
| 21 | Supply & replace Coolant for Radiator. |
| 22 | Inspection and Servicing of DG set 40 to 50 KVA (SM/MES No- (i) 715/6010/DG/AL/06, (ii) - 261839W ) Make-Kirloskar, including replacement of following parts alignment of Alternator, Minor reapir and complete checking of fuel Pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):- |
| 23 | Supply only Filter kit comprising of Air,Fuel and oil filters |
| 24 | Supply only Fan Belt as per sample |
| 25 | Diesel pipe set with clamp as per sample |
| 26 | Repair of diesel pump |
| 27 | Repair of nozzle |
| 28 | Battery lead |
| 29 | Vibration pad |
| 30 | supply only diesel water filter kit |
| 31 | Inspection and Servicing of DG set 30 KVA (MES No- 263/6118-DG/AL/20 ( Make- Kirloskar) including replacement of following parts alignment of Alternator, minor work and complete checking of fuel pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):- |
| 32 | Diesel filter kit |
| 33 | Oil filter kit |
| 34 | Fan belt as per sample |
| 35 | Diesel pipe set with clamp as per sample |
| 36 | Repair of diesel pump |
| 37 | Repair of nozzle |
| 38 | Battery lead |
| 39 | Vibration pad |
| 40 | Diesel water filter kit |
| 41 | S&F in replacement contactor AC 415 volt , operating coil -230 volts , four pole type MCX 32 of L&T or equivalent in Scheneider / C&S / Legrand including auxiliary contacts 2NO+2NC suitable for AMF panel complete all as specified and directed. |
| 42 | S&F in replacement contactor AC 415 volt , operating coil -230 volts , four pole type MCX 33 of L&T or equivalent in Scheneider / C&S / Legrand including auxiliary contacts 2NO+2NC suitable for AMF panel complete all as specified and directed. |
| 43 | S&F in replacement of AMF panel auto start relay / as per existing and with copper wiring of AMF panel with suitable size wire complete all as sample of existing relay, complete all as specified and directed. |
| 44 | Supply & install in repair Lead Acid Battery 12 V 150 AH complete all as specified and directed. Make- EXIDE/AMARON/ LUMINOUS POWER |
| 45 | S&F in replacement AVRs unit of alternator of DG Set 30 to 50 KVA capacity as per existing type and model and all as per the direction of the Engr-in-charge. |
| 46 | S&F in replacement complete hose pipe set with clamps for DG sets of DG set capacity 12.5 KVA to 50 KVA as per existing type and size. |
| 47 | Dismantling AC alternator assembly and exciter of any capacities including taking out of worn out windings of Rotor and stator incl rewinding the coils with suitable guage of super enamelled winding wire of copper , renewal of insulation materials, heat varnishing, connecting leads and terminal plates all as required to make serviceable of the DG and including reassembling the same after necessary testing all as directed. The item rate includes shifting of altternatos from location to workshop and back to the installation complete all as directed Note : Winding coils of super enameled copper shall be measured & paid separately under relevant item of the schedule. |
| 48 | M&L for copper winding for item No-47 above as per existing guage complete all as specified and directed |
| 49 | Taking down self starter assembly of DG set of capacity 30/40/50 KVA, 12 volt from the existing position, opening in to parts, sort out the unserviceable items like carbon brush, pinion etc. and replace the same with new one including rewinding of field coils, re-assembling and re-fixing the same in its original position including to and fro conveyance charges to work shop and testing and all as per the direction of the Engr-in-charge. |
| 50 | Taking down the Dynamo 12/24 Volts from the existing position of 30/40/50 KVA, shifting to the work shop and back , opening into parts, cleaning to sort out the unserviceable parts, replace by new one, rewinding and varnishing, heating of coil, reassembling and re-fixing to its base including to and fro conveyance charges for work shop to the site for any capacity of DG and all as per the direction of the Engr-in-charge. |
| 51 | Dismantling fuel injection pump (FIP) of DG set carefully from 30/40/50 KVA, opening in to parts, for maintenance, servicing, tuning by overhauling and calibration up to 6 cylinders, adjustment of nozzle pressure and other controls, replacement of unserviceable spares, re-fixing the FIP on its original position including to and fro charges to thr work shop and all as per the direction of the Engr-in-charge. |
| 52 | Labour only for complete calibration for function and checking of AMF panel with and including minor repairs,tightening of wiring cables complete all as specified and directed at site |
| 53 | Material and labour for painting by using spray painting method for DG set canopy/complete body/LT panel board (After removing incoming/out going electrical connection and refixing the same) with two coats of superior quality synthetic enamel paint after cleaning of existing surface, removing rust including marking of incoming/outgoing feeder with letters, MES/SM Nos complete and all as per the direction of the Engr-in-charge. Please Enable Macros to View BoQ information |
| 54 | Material and labour for painting by using spray painting method for DG set canopy/complete body/LT panel board (After removing incoming/out going electrical connection and refixing the same) with two coats of superior quality synthetic enamel paint after cleaning of existing surface, removing rust including marking of incoming/outgoing feeder with letters, MES/SM Nos complete and all as per the direction of the Engr-in-charge. Please Enable Macros to View BoQ information |
