|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair/Replacement of pipe line and control valve pumpin system and switchgear installed at 'B' Reservoir area under GE (U) Udhampur Contract No: GE/U-65/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil. Complete all as specified and directed by Engr-in-Charge. |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested complete, all as specified and directed by Engineer-in-Charge |
| 4 | Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge |
| 5 | Taking up or down CI/DI/MS water mains pipe 300 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engineer-in-ChargeNote : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. |
| 6 | Refixing MS/DI/CI pipe obtained from item No. 4 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 300 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engineer-in-Charge |
| 7 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engineer-in-Charge |
| 8 | Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge |
| 9 | Refixing GI/CI pipe obtained from Item No. 07 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections all as specified and directed by Engr-in-Charge. |
| 10 | Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking up or down old unseviceable GI pipe of size 100 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge |
| 12 | Description all as per ser item 10.00 here-in-before, but of size 80 mm dia |
| 13 | Description all as per ser item 10.00 here-in-before, but of size 50 mm dia |
| 14 | Description all as per ser item 10.00 here-in-before, but of size 40 mm dia |
| 15 | Description all as per ser item 10.00 here-in-before, but of size 25 mm dia |
| 16 | Description all as per ser item 10.00 here-in-before, but of size 20 mm dia |
| 17 | Refixing GI/CI pipe obtained from Item No. 10 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 100 mm dia complete including main branch connections all as specified and directed by Engr-in-Charge |
| 18 | Description all as per ser item No 16.00 here-in-before, but of size 80 mm dia |
| 19 | Description all as per ser item No 16.00 here-in-before, but of size 50 mm dia |
| 20 | Description all as per ser item No 16.00 here-in-before, but of size 40 mm dia |
| 21 | Description all as per ser item No 16.00 here-in-before, but of size 25 mm dia |
| 22 | Description all as per ser item No 16.00 here-in-before, but of size 20 mm dia |
| 23 | Supply & fixing GI pipes of size 100 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 24 | Description all as per ser item No 22.00 here-in-before, but of size 80 mm dia |
| 25 | Description all as per ser item No 22.00 here-in-before, but of size 50 mm dia. |
| 26 | Description all as per ser item No 22.00 here-in-before, but of size 40 mm dia. |
| 27 | Description all as per ser item No 22.00 here-in-before, but of size 25 mm dia. |
| 28 | Description all as per ser item No 22.00 here-in-before, but of size 20 mm dia. |
| 29 | Description all as per ser item No 22.00 here-in-before, but of size 15 mm dia. |
| 30 | Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 31 | Stem bush bronze |
| 32 | Gland flange cast iron |
| 33 | Stud/Bolt carbon steel |
| 34 | Stem nut/chaknut |
| 35 | Stem Stain less steel |
| 36 | Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 37 | Stem bush bronze |
| 38 | Gland flange cast iron |
| 39 | Stud/Bolt carbon steel |
| 40 | Stem nut/chaknut |
| 41 | Stem Stain less steel |
| 42 | Decoupling, disconnecting sluice valve of size 200 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 43 | Stem bush bronze |
| 44 | Gland flange cast iron |
| 45 | Stud/Bolt carbon steel |
| 46 | Stem nut/chaknut |
| 47 | Stem Stain less steel |
| 48 | Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 49 | Stem bush bronze |
| 50 | Gland flange cast iron |
| 51 | Stud/Bolt carbon steel |
| 52 | Stem nut/chaknut |
| 53 | Stem Stain less steel |
| 54 | Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore. Complete all as specified and directed by Engineer-in-charge. |
| 55 | Supply and fix Nut bolt M-16 (50mm length) & M-20 (75mm length) with 02 (each 5mm thick) Nos washer at each set, Complete all as specified and directed by Engineer-in-charge. |
| 56 | Supply and fixing leather gasket including replacement old UNSV gasket for 200 mm complete all as specified and directed by Engr-in-Charge. |
| 57 | Supply and fixing leather gasket including replacement old UNSV gasket for 150 mm complete all as specified and directed by Engr-in-Charge. |
| 58 | Supply and fixing in replacement of cast iron non return valve, conforming to IS-5312, suitable for 200 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv complete all as specified and directed by Engr-in-Charge. |
| 59 | Description all as per Serial Item No 37.00 here- in- before, but of size 150 mm dia |
| 60 | Description all as per Serial Item No 37.00 here- in- before, but of size 100 mm dia |
| 61 | Description all as per Serial Item No 37.00 here- in- before, but of size 80 mm dia |
| 62 | Description all as per Serial Item No 37.00 here- in- before, but of size 50 mm dia |
| 63 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge. |
| 64 | Description all as per Serial Item No 42.00 here- in- before, but of dia 250 mm bore pipe |
| 65 | Description all as per Serial Item No 42.00 here- in- before, but of dia 200 mm bore pipe. |
| 66 | Description all as per Serial Item No 42.00 here- in- before, but of dia 150 /100mm bore pipe. |
| 67 | Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. |
| 68 | Description all as per Serial Item No 46.00 here- in- before, but of dia 250 to 300 mm bore pipe. |
| 69 | S&F of Gun-metal, globe or gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge. |
| 70 | Description all as per Serial Item No 48.00 here- in- before, but upto 40 mm bore. |
| 71 | Description all as per Serial Item No 48.00 here- in- before, but upto 25 mm bore. |
| 72 | Description all as per Serial Item No 48.00 here- in- before, but upto 20 mm bore. |
| 73 | Description all as per Serial Item No 48.00 here- in- before, but upto 15 mm bore. |
| 74 | M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing complete all as specified and directed by Engr-in-Charge. |
| 75 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling complete all as specified and directed by Engr-in-Charge. |
| 76 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, complete all as specified and directed by Engr-in-Charge. |
| 77 | Supply and fixing GI fittings medium grade ISI marked including complete all as required at site complete all as specified and directed by Engr-in-Charge. |
| 78 | Elbow 15mm |
| 79 | Elbow 20mm |
| 80 | Elbow 25mm |
| 81 | Elbow 40mm |
| 82 | Elbow 50mm |
| 83 | Elbow 80mm |
| 84 | Socket 15mm |
| 85 | Socket 20mm |
| 86 | Socket 25mm |
| 87 | Socket 40mm |
| 88 | Socket 50mm |
| 89 | Socket 80mm |
| 90 | Union 15mm |
| 91 | Union 20mm |
| 92 | Union 25mm |
| 93 | Union 40mm |
| 94 | Union 50mm |
| 95 | Union 80mm |
| 96 | Elbow reducer 20 x 15mm |
| 97 | Elbow reducer 25 x 20mm |
| 98 | Elbow reducer 40 x 25mm |
| 99 | Socket reducer 15x20mm |
| 100 | Socket reducer 25x20mm |
| 101 | Socket reducer 40x25mm |
| 102 | Socket reducer 40x20mm |
| 103 | Socket reducer 50x25mm |
| 104 | Nipple 15 x50mm |
| 105 | Nipple 15 x 75 mm |
| 106 | Nipple 15 x 100 mm |
| 107 | Nipple 15 x 150 mm |
| 108 | Nipple 20 x50mm |
| 109 | Nipple 20 x 75mm |
| 110 | Nipple 20 x100mm |
| 111 | Nipple 20 x 150mm |
| 112 | Nipple 25 x 50mm |
| 113 | Nipple 25 x 75mm |
| 114 | Nipple 25 x 100mm |
| 115 | Nipple 40 x 50mm |
| 116 | Nipple 40 x 100mm |
| 117 | Nipple 40 x 150mm |
| 118 | Nipple 50 x 50mm |
| 119 | Nipple 50 x 100mm |
| 120 | Nipple 50 x 150mm |
| 121 | Tee 15mm |
| 122 | Tee 20mm |
| 123 | Tee 25mm |
| 124 | Tee 20x15mm |
| 125 | Tee 25x20mm |
| 126 | Tee 40x15mm |
| 127 | Tee 40x20mm |
| 128 | Tee 40x25mm |
| 129 | Tee 50x25mm |
| 130 | Dead plug 15mm |
| 131 | Dead plug 20mm |
| 132 | Dead plug 25mm |
| 133 | Dead plug 40mm |
| 134 | Dead plug 50mm |
| 135 | Spunyarn |
| 136 | Material and labour for taking down by scraping and preparation the surface of the header approx 6 mtr long with sluice valve and NRVs at pump houses, OHT including repainting one coat of super quality of black enamel paint with one under coat of primer , etc complete all as specified and directed by Engr-in-Charge. |
| 137 | Supply and fixing in replacement of cast iron sluice valve of size 300 mm (PN 1.6) (ISI Marked) with iron wheel head, both end flanged, stainless steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv complete all as specified and directed by Engr-in-Charge. |
| 138 | Description all as per Ser item No 58.00 here- in -before but size 200 mm dia |
| 139 | Description all as per Ser item No 58.00 here- in -before but size 150 mm dia |
| 140 | Description all as per Ser item No 58.00 here- in -before but size 100 mm dia |
| 141 | Description all as per Ser item No 58.00 here- in -before, but size 80 mm dia |
| 142 | Material and labour for fabrication of MS sheets ,angle iron in replacement of old pit cover with necessary welding work and one coat of red oxide primer to the welded works and painted with black enamel paint complete all as specified and directed by Engr -in - Charge. |
| 143 | M & L for loose filling in pump houses, under header, under road cuttings etc of hard core broken to gauge not exc 63 mm broken stone/boulders incl leveling and spreading llime stone powder under stones ccomplete all as specified and directed by Engr -in - Charge. |
| 144 | M&L for neoprene rubber gasket sheet of size 1/8 \\" thickness 16\\" wide x 30\\" long heavy duty suitable for preparing gakets for motor, valves,NRVs ,ARVs etc complete all as specified and directed by Engr -in - Charge. |
| 145 | Decoupling, disconnecting suction line and discharge line taking down from foundation bolts, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line re-alignment commissioning and testing in respect of centrifugal/multistage pump of capacity 60/75/100 HP complete all as specified and directed by Engr-in-Charge.Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates.(ii) S&F of parts shall be measured and paid separately under respective item of sch A. |
| 146 | Description all as per Ser item No 66.00 here- in -before, but capacity 30/40/50HP. |
| 147 | Description all as per Ser item No 66.00 here- in -before, but capacity 25/20/15/12/10HP. |
| 148 | Description all as per Ser item No 66.00 here- in -before, but capacity 7.5/5HP/3HP |
| 149 | Description all as per Ser item No 66.00 here- in -before, but capacity 270 HP |
| 150 | Supply & Fix parts in repair for single/double/multistage pumps of capacity 60/75/100 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge. |
| 151 | Pump impeller CI/SS |
| 152 | Pump shaft stainless steel shaft complete with check nut and keys |
| 153 | Tyre coupling. |
| 154 | Star coupling |
| 155 | Gland cup with nuts and bolts |
| 156 | Shaft sleeves |
| 157 | Bearing housing |
| 158 | S&F parts for single/double/multistage pump of capacity 30/40/50HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge. |
| 159 | Pump impeller made out of Bronze. |
| 160 | Pump shaft stainless steel shaft complete with check nut and keys |
| 161 | Shaft sleeves |
| 162 | Casing bearing |
| 163 | Bearing housing |
| 164 | tyre coupling/star coupling |
| 165 | Gland cup with nut and bolts |
| 166 | S&F parts for single/double stage pump of capacity 25/20/15/12/10HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge. |
| 167 | Pump impeller |
| 168 | Pump shaft stainless steel shaft complete with check nut and keys |
| 169 | Shaft sleeves |
| 170 | Casing bearing |
| 171 | Bearing housing |
| 172 | tyre coupling/star coupling |
| 173 | Gland cup with nut and bolts |
| 174 | S&F parts for single/double stage pump of capacity 7.5/5HP/3HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge. |
| 175 | Pump impeller. |
| 176 | Pump shaft stainless steel shaft complete with check nut and keys |
| 177 | Shaft sleeves |
| 178 | Casing bearing |
| 179 | Bearing housing |
| 180 | tyre coupling/star coupling |
| 181 | Gland cup with nut and bolts |
| 182 | S&F parts for single/double stage pump of capacity 270HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge. |
| 183 | Pump impeller made out of Bronze. |
| 184 | Pump shaft stainless steel shaft complete with check nut and keys |
| 185 | Shaft sleeves |
| 186 | Casing bearing |
| 187 | Bearing housing |
| 188 | tyre coupling/star coupling |
| 189 | Gland cup with nut and bolts |
| 190 | Disconnecting electric connection of 60/75/100/270 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. Cost of loading, unloading & transportation shall be deemed included in the quoted rates. complete all as directed by Engineer-in-Charge.Note: Winding of motor stator & rotor shall be measured & paid separately.(a) Rewinding of motor will be measured and paid separately under relevent itemThe motor shall be squerrel cage induction motor.The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed.The contractor shall be arranged a workshop visit of Engr-in-Charge for each job and cutting complete burnt winding of motor in presence of Engr-in-Charge. |
| 191 | Description all as per Ser item No 78.00 here- in -before, but capacity 30/40/50HP motor |
| 192 | Description all as per Ser item No 78.00 here- in -before, but capacity of 25/20/15/12/10HP motor |
| 193 | Description all as per Ser item No 78.00 here- in -before, but capacity of of 7.5/5HP/3HP motor |
| 194 | Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class 'B' paper insulation inside the slots, rewinding the motor of capacity 270/100/75/60/50/40/30/25/20/15/12/10/7.5/5HP /3HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time, complete all as specified and directed by Engr-in-Charge.Note:- Cost of labour for winding deemed to be included in the rate quoted. Make : Atlas/Devi Dayal or equivalent make. |
| 195 | S&F in replacement of Pump bearing No. 6307 C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make |
| 196 | S&F in replacement of Pump bearing No. 6308 2RS1/C3 including taking down the old existing bearing. Make:-SKF/NBC or equivalent make |
| 197 | S&F in replacement of Pump bearing No. 6309 M/C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make |
| 198 | S&F in replacement of Motor bearing No. 6310 M/C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make |
| 199 | S&F in replacement of Motor bearing No. 6311 C3 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make |
| 200 | S&F in replacement of Motor bearing No. NU 304 ECP including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make |
| 201 | S&F in replacement of Pump bearing No. 7311 including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make |
| 202 | S&F in replacement of Motor bearing No. N411M including taking down the old existing bearing, complete all as specified and directed by Engr-in-Charge. Make:-SKF/NBC or equivalent make |
| 203 | Supply and fix in replacement of MS stud bolts of existing size with nuts suitable for pumps and motors of various capacity installed at installations, complete all as specified and directed by Engr-in-Charge. |
| 204 | M&L for spray painting of pump and motor, frame of capacity 270HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction complete all as specified and directed by Engr-in-Charge. |
| 205 | M&L for spray painting of pump and motor, frame of capacity 60/75/100 HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction all as specified and as directed by Engr-in-charge. |
| 206 | M&L for spray painting of pump and motor, frame of capacity 20/30/50HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction complete all as specified and directed by Engr-in-Charge. |
| 207 | M&L for spray painting of pump and motor, frame of capacity upto 15HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction complete all as specified and directed by Engr-in-Charge. |
| 208 | M&L for writing about the machinery installed in different instalations eg Cap, discharge,MES No,Year of installation and head of the machinery on the wall in front of the pump motor with flex board and fixing to the wall complete all as specified and directed by Engr-in-Charge. |
| 209 | M&L in replacement of aluminium lugs suitable for 400 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge. |
| 210 | M&L in replacement of aluminium lugs suitable for 240 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge. |
| 211 | M&L in replacement of aluminium lugs suitable for 150 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge. |
| 212 | M&L in replacement of aluminium lugs suitable for 95 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge. |
| 213 | Supply and laying in replacement of synthetic rubber insulated mats 10 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006,( superseding IS 5424) suitable for electrical shock safety of sizes 2mx1m complete all as specified and directed by Engr-in-Charge. |
| 214 | Supply and fix Gland packing type 3 of size 12 mm made of asbustus grip with silicon complete all as specified and directed by Engr-in-Charge. |
| 215 | Description all as per Ser Item No 102.00 here-in-before, but size of 16 mm thick |
| 216 | M&L for construction of stone masonary valve pit size 1.2 mtr x 1.2mtr x1.20 mtr (internal dimention) including stone work, PCC work and MS sheet work as per site requirment, Complete all as specified and directed by Engr-in-Charge. |
| 217 | M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 95 sqmm inculding taking down existing old unserviceable cable of complete all as specified and directed by Engr-in-Charge. |
| 218 | Description all as per Ser Item No 105.00 here-in-before, but size of 70 Sq mm |
| 219 | Description all as per Ser Item No 105.00 here-in-before, but size of 50 Sq mm |
| 220 | Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temp 30 to 120 degree celsious drop point 174 degree celsious, colourlight fawn complete all as specified and directed by Engr-in-charge. Make: Servo ( IOC)/Bhart petrolium/Castrol or equivalent make approved by E-in-C's Branch. |
| 221 | Supply only 0-Tolidine reagent (500 ml) for chlorine estimation with four nos chloroscope for various pump houses complete all as specified and directed by Engr-in-charge. |
| 222 | M&L for copper thimble suitable for 95/70 Sqmm single core copper cable including taking down the existing unserviceable one complete, all as specified & directed by Engr-in-Charge. |
| 223 | M&L for copper thimble suitable for 50/35 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified & directed by Engr-in-Charge. |
| 224 | S&F MS clamp suitable for holding lead joints/leakages of 300 /250 mm bore of pipes any type made out of 40 mm x6 mm thick flat iron with M.S nuts bolts with flat washer 3mm thick -02 No for each complete all as specified & directed by Engr-in-Charge. |
| 225 | Description all as per Ser Item No 112.00 here-in-before, but of size 200mm bore |
| 226 | Description all as per Ser Item No 112.00 here-in-before, but of size 150mm bore |
| 227 | Description all as per Ser Item No 112.00 here-in-before, but of size 100/80 mm bore |
| 228 | Material & Labour for in replacement of steel nuts, bolts, washers of any size required at site complete all as specified & directed by Engr-in-Charge. |
| 229 | Material and labour for fabrication, supply, fixing and commissioning signage boards for installations of size not less than 1.0M x 1.0M made out of ACP sheet of 3mm thickness with english alphabets and numerics cut out and designed out of 3mm thick acrylic sheet neatly pasted on the ACP board with MES logo ,framed and standed in stainless steel,both legs of height 1.5M above the ground level and embeded in pcc 1:4:8 (45 cm below GL)l with necessary fixing arrangement as per the site requirement complete all as specified and as directed..Note:- (a) Before fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at various locations. |
| 230 | Material and labour for fixing of Layout diagram of pipe lay out / flow chart/ shock treatment chart etc of size 1.5M x 1.0M for power houses, sub stations and other E/M installations as per the requirement at various locations made out of pre laminated board with digital printing, pasting side beadings of decorative aluminium channel with proper fixing arrangement etc complete all specified and directed by Engr-in-charge.Note:- (a) Before for fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the location including providing electrical connections complete as specified by Engr-in-Charge |
| 231 | M&L Chemical spray (DC 226 contact cleaner) in container of 415 ml/300g for precision blended multipurpose product for prevents corrosion penetrates, lubricants, displaces and seals out moisture release rusted mechanism etc complete all as specified and directed by Engr-in-Charge. |
| 232 | Material and labour for spraying herbicide (Round up) on area to remove unwanted vegitation/grass at various locations complete all as specified and directed by Engr-in-Charge. |
| 233 | Material and labour for shifting heavy items /using excavator / cleaning areas / cleaning site by providing crane/hydra/excavators/tractors/trolley ect as required at site complete all as specified and directed by Engr-in-Charge. |
| 234 | Supply and fix indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x -400 Sqmm complete all as specified and directed by Engr-in-Charge.Make : 3MDenson/Reychem |
| 235 | Supply and fix indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 240-300 Sqmm complete all as specified and directed by Engr-in-Charge. Make: 3MDenson/Reychem |
| 236 | Supply and fixing indoor/outdoor end termination joint heat shrinkable 1100 Volts for XPLE cable of size 3.5 x 70-120 Sqmm complete all as specified and directed by Engr-in-Charge. |
| 237 | M&L in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and directed by Engr-in-Charge. |
| 238 | Material and labour for repair of valve pit chamber of any size not less than 1.2 mtr x1.2mtrx 900 mm necessary brick work, cement mortar / plastering in brick work,PCC ,welding work of hinges and MS sheet cover,painting on welding works ,MS sheets and plastered surface complete all as specified and directed by Engr-in-Charge. |
| 239 | Dismantling and taking down old unsv LT Panel and Supplying, installing, testing & commissioning indoor type cubical panel board outer shell made out of 3.15 mm thick CRCA sheet and inner shell made out of 2 mm thick and MS angle section 50x50x6 mm suitable for floor mounted with nuts & bolts , frame factory fabricated with front and back openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/openable with arrangement of pad locking on both doors incl 2 no. of pad locks of three keys shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, incl Copper bus bar of 600 A , tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following, complete all as specified and directed by Engr-in-Charge :-a) Supply and fixing MCCB 400 Amps, 36 KA 4 pole 415 Volts AC, adjustable type, complete all as directed by Engg-in-charge (incoming)-01 Nos.b) Supply and fixing ON Load change over 400 Amps,4 pole 415 V AC, (IC)-01 Nos. |
| 240 | c) Out going MCCB TP 160 Amps 36 KA adjustable type - 3 Nos d) Star delta starter with contactor for 100 HP 02 Nose) Interconnection of MCCBs ,Change Over to Busbar with copper strip of suitable size with PVC insulated colour coaded heat shrinkable type sleeves - 1 Jobf) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nosg) Digital Ammeter of range 0-400 A, auxiliary voltage 230 volts with selector switch -01 Nosh) Volt meter of range 0-500 Volts, auxiliary voltage 230 volts with selector switch -1 Noj) Single phase preventer , Over load /under voltage relay , Phase sequence corrector 01 jobMisc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, cable glands etc complete |
| 241 | Note for item no 64 (i) The quoted rate shall includes minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc.(ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694.(iii) Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE.(iv)The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated (v) Cable will be entered in panels through gland. (vi)Cost of marking description on the front door as per direction of Engr-in-Charge is incl in quoted rate. |
| 242 | Providing, fabricating and fixing a 3D illuminated Name Board displaying the text “as described by Engr -in Charge” along with the MES logo at the Main Gate, of size up to 4.5 metres in length, 0.60 metre in width, and 0.15 metre in thickness. The board shall be constructed from a high-quality steel structure, duly powder-coated and laminated to ensure durability and resistance to weather conditions. The board shall feature raised 3D letters in white colour mounted on a blue background, with inbuilt white LED illumination to provide a uniform glow and ensure clear visibility during nighttime. The entire lighting system shall be provided with suitable Ingress Protection (minimum IP-65) to safeguard against rainwater, dust, and environmental effects. The scope of work includes the provision of a supporting framework made of MS angle iron of size 50 mm × 50 mm × 6 mm thick, designed to be securely mounted on the pillars on both sides of the gate. The MS structure shall be treated with anti-corrosive primer and finished with two coats of synthetic enamel paint of approved shade to ensure long-term protection. The framework shall be fixed with suitable size nuts and bolts, properly embedded into the pillars, and any disturbed surfaces shall be repaired and finished to match the existing. |
| 243 | The work also includes lamination, LED modules, internal wiring, power supply/driver, fixing arrangements, clamps, anchors, and mounting of the board, ensuring a complete and functional installation in all respects, all as specified and directed.Note: The cost of providing and operating a Hydra/Crane required for lifting and installation of the board shall be deemNote:- (a) Before fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at various locations. |
| 244 | M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 16 sqmm 4 Core inculding taking down existing old unserviceable cable of complete all as specified and directed by Engr -in-charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
