|
| 1 | Scraping of old white or colour wash including refusal of dismantled material up to 60.0mtr distance as per direction by engg-in-charge. |
| 2 | 12mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) |
| 3 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 4 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over @ 1.25Ltr/10Sqm including one coat of primer apllied @ 0.75Ltr/105qm coat curing and cost of all |
| 5 | Providing and fixing In position wall panels of plain teak wood particle board 12mm thick bonded with B.W.P. type Phenol formaldehyde synthetic resin tiles kali wood frame and provision for providing switch board fixtures etc. as per |
| 6 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab, including rubbing and polishing complete |
| 7 | Cleaning of floor by rubbing with machine and its polishing work including supply of labour T&P etc all complete. |
| 8 | Supply and fixing of float glass panes of nominal thickness of 5mm (weight not less than 12.50 Kg/Sqm) |
| 9 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab, including rubbing and polishing complete |
| 10 | Cleaning of floor by rubbing with machine and its polishing work including supply of labour T&P etc all complete. |
| 11 | Supply and fixing of float glass panes of nominal thickness of 5mm (weight not less than 12.50 Kg/Sqm) |
| 12 | Tile work in skirting, risers of steps and dado up to 2 m helght over 12 mm thick bed of cement mortar 1:3 (i cement:3 coarse sand) and jointed with grey cement slurry @3.3 küsqm, Inctuding pointing In white cement mixed with |
| 13 | Supply and fixing of P.V.C. doors of 1\\"thick commercial quality including fixing and adjustment of hinges, bolts locks, handles spring fitting etc all complete. |
| 14 | Marble stone flooring with 20 mm thick marble stone, as per sample of marble approved by Engineerin-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and 1 jointed wtth grey cement slurry, |
| 15 | Applying priming coat over new steel or other metal with two coats after priming coat up to 10cm width or girth or small articles not exceeding 0.10Sq.M in area with superior synthetic enamel such as Luxol 3, in even shade with labour T&P |
| 16 | Providing and fixing of brass bib cock of approved quality: 15mm nominal bore |
| 17 | Providing and fixing wash basin with C.I. Brakckets, 15mm C.P. Brass pillar taps, 32mm C.P. Brass waste pipe of standard pattern, including painting of fittings and |
| 18 | Providing and fixing of Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply 25mm nominal outer dia pipes |
| 19 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1 sq. mm. FR PVC insulated multistrand single core copper conducter cable in PVC conduit pipe on |
| 20 | Wiring point for light with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG copper |
| 21 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium |
| 22 | Supply and fixing of switch box 250 x 250 x 65 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet |
| 23 | Supply and fitting of ceiling fan Usha, Khetan, Bajaj I.S.I mark including all complete. |
| 24 | S/F of Exhaust fan with 1.5sq mm FR PVC insulated copper conductor cable in 25mm dia heavy duty etc all compete. |
| 25 | Supply and fitting of 6Amp to 32Amp SP MCB KA (10KA) legrend hexic etc all complete. |
| 26 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. |
| 27 | S/F of 13watt LE.D. lighting of approved 1 x quality etc all complete. (M.R.) |
| 28 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
