|
| 1 | Scraping old white or colour wash including disposal of refuse material as directed by Engineer-in-charge with a distance of 60 meter. (200 feet) soR-Ch no.- 17-18-708 |
| 2 | Dismantling of brick work or stone work in lime or cement mortar and including stacking of materials as directed by engg. i/c. within a distance of 60mtr |
| 3 | Dismantling of reinforced cement concrete or reinforcement brick work, including stacking of materials as directed by engg. i/c. within a |
| 4 | Dismantling of cement concrete or brick or granolithic floors including base concrete and including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 5 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:4:8 (1 cement: 4 coarse sand (zone-iii) : 8 graded brick |
| 6 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:1.5:3 (1 cement: 1.5 coarse sand (zone-iii): 3 graded stone aggregate 200 mm nominal size |
| 7 | Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand) |
| 8 | Brick work with common burnt clay (non modular) bricks of class-150 in super structure above plinth level up to floor V level in all shapes and sizes cement mortar 1:4 (1 cement: 4 coarse sand) |
| 9 | 12mm cement plaster 1:4 (1 cement: 4 coarse sand) finished with a floating 2 coat of neat cement. |
| 10 | Finishing walls with putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. all complete (SOB.Ch.15.311 |
| 11 | Finishing walls with exterior Emulsion Paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 ltr./10 sam |
| 12 | Earth work in surface excavation by mechanical means (Hydraulic excavator)/manual means foundation trenches or drain (not exceeding 1.5m in width or 10sam on plan) |
| 13 | Providing & laying in position specified grade of reinforced cement cocrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth |
| 14 | Reinforced cement cocrete work in walls (any thickness), including attached pilasters, buttreses, plinth and string courses, fillets & in coloumns. pillars. piers, abutments. |
| 15 | Reinforced cement concrete work in beam, suspended floors, roofs having slope up to 15\\" landing, bolconies, shelves, chajjas, lintels, bands, plain, window sills, stair cases and spiral stair cases above plinth up to floor |
| 16 | Centering & shuttering including strutting, propping etc and removal 2 of form work (upto 5th floor): Retaining walls, return walls, walls (any thickness) including attavhed pilasters, buttersses, plinth and string courses fillets, kerbs, and steps etc |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and Binding all completeunto plinth level |
| 18 | Providng & fixing 18mm thick granite (gang saw cut), mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias |
| 19 | Tile work in skirting, risers of steps and dado up to 2 m helght over 12 mm thick bed of cement mortar 1:3 (i cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kÜsqm, Inctuding pointing In white cement mixed with pigment of matching shade complete. |
| 20 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorbtion less than 0.08% and conforming to IS: 15622, of approved |
| 21 | Red sand stone work for wall lining etc. (Veneer work) 30mm thick in cement mortar 1:3 (1 cement: 3 coarse sand) including camping |
| 22 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :25.0 mm thickness panes |
| 23 | Applying priming coat over new steel 2 or other metal with two coats after priming coat up to 10cm width or girth or small articles not exceeding |
| 24 | Supply and fixing of anodized aluminium partition having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board |
| 25 | Providing and fixing vitreous china dual purpose closet suitable for use as Squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass |
| 26 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usinf structural |
| 27 | S/F of brass bib cock 15 mm dia 400 gm heavy quality(Gem Mikadeo/Encess's Williams in all complete. (Ch-21 si no. 42) |
| 28 | Providing and fixing of C.P. brass stop 1 cock (concealed) of approved quality : 15mm nominal bore |
| 29 | Providing and fixing wash basin with C.I. Brakckets, 15mm C.P. Brass pillar taps, 32mm C.P. Brass waste pipe of standard pattern, including painting |
| 30 | upply & hoisting of sintex or equivalent high density polytheleneseamless of piece moulded tanks and placing the same |
| 31 | Wiring point for light with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG |
| 32 | Supply of L.E.D. Bulb etc. all complete. |
| 33 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all |
| 34 | S/F of Exhaust fan with 1.5sq mm FR PVC insulated copper conductor cable in 25mm dia heavy duty etc all compete. |
| 35 | Supply and fitting of ceiling fan Usha, 1 Khetan, Bajaj I.S.I mark including all complete. |
| 36 | Supply and fixing of switch box 250 x 250 x 65 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet |
| 37 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1 sq. mm. FR PVC insulated multistrand single core copper conducter cable in |
| 38 | Providing and fixing of Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplt, including complete as per directed by Engg-in-charge.15mm nominal outer dia |
| 39 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
