|
| 1 | Procurement of Different Spares related to Bottom Ash Clinker Crusher and Bottom Ash System for Overhauling of Unit 2 scheduled in July August 2026.SGTPP |
| 2 | CAM SEGMENT FOR CLINKER CRUSHER FOR BOTTOM ASH CRUSHER DCIPS DRAWING NO-25P06-T-1B-582,MATERIAL-DURITE,BHN:500 |
| 3 | SHAFT WITH SHAFT STRUCT & SHAFT SLEEVE FOR BOTTOM ASH CRUSHER DCIPS MOC-EN24 & SS 410,DRAWING NO 25P06-T-1B-582 |
| 4 | WEAR PLATE FRONT FOR CLINKER CRUSHER FOR BOTTOM ASH CRUSHER DCIPS DRAWING NO-25P06-T-1B-582,MATERIAL-DURITE,BHN:500 |
| 5 | WEAR PLATE BACK FOR CLINKER CRUSHER FOR BOTTOM ASH CRUSHER DCIPS DRAWING NO-25P06-T-1B-582,MATERIAL-DURITE,BHN:500 |
| 6 | WEAR PLATE SIDE FOR CLINKER CRUSHER FOR BOTTOM ASH CRUSHER DCIPS DRAWING NO-25P06-T-1B-582,MATERIAL-DURITE,BHN:500 |
| 7 | GLAND FOR PACKING FOR BOTTOM ASH CRUSHER DCIPS MOC-CI FG-260 IS:210,DRAWING NO 25P06-T-1B-582 |
| 8 | PACKING GLAND FOLLOWER FOR BOTTOM ASH CRUSHER DCIPS MOC-BRONZE LTB 2,IS:318,DRAWING NO 25P06-T-1B-582 |
| 9 | PACKING GLAND FLANGE FOR BOTTOM ASH CRUSHER DCIPS MOC-MS,IS:2062 GR-A,DRAWING NO 25P06-T-1B-582 |
| 10 | LANTERN RING FOR BOTTOM ASH CRUSHER DCIPS MOC:BRASS LTB-2,IS318,AS PER DCIPS DRAWING NO 25P06-1B-T-722 |
| 11 | LABYRINTH RING OF BEARING HOUSING MOC-MS IS 2062,FOR AHP-IFOR CLINKER GRINDER,MAKE-DCIPS |
| 12 | CAM BOLT FOR EXEN CRUSHER FOR BOTTOM ASH CRUSHER SIZE: M20 X 65 LONG,SQ.HEAD,THREAD LENGTH 34 MM WITH NUT,LOCK NUT & SPRING WASHER.M.O.C: EN8 |
| 13 | CHAIN SIMPLEX FOR BOTTOM ASH CRUSHER DCIPS DRAWING NO 25P06-T-1B-582 |
| 14 | SPROCKET DRIVE AND DRIVEN FOR BOTTOM ASH CRUSHER DCIPS DRG.NO.28P03-1B-T-582(REV-2) |
| 15 | FEED SUMP FOR BOTTOM ASH CLINKER CRUSHER FOR BOTTOM ASH CRUSHER DCIPS AS PER DCIPS DRAWING NO 25P06-1B-T-722 |
| 16 | NOZZLE TIP WITH CERAMIC INSERT # 2,13 DCIPS FOR JET PROPULSION PUMP,PART NO-2&13,AS PER DCIPS DRAWING N0.-25P06-1B-T-591# FOR JET PROPULSION PUMP,AS PER DCIPS DRAWING N0.-2 5P06-1B-T-591 SGTPP1 |
| 17 | NOZZLE INLET FOR JET PUMP FOR JET PUMP SGTPP DCIPS MOC: FG,IS 210,AS PER DCIPS DWG NO 25P06-T-1B-591 |
| 18 | THROAT CUM DISCH PIPE OF JET PUMP FOR JET PUMP SGTPP DCIPS MOC: DURITE(BHN 500-550),AS PER DCIPS DWG NO 25P06-T-1B-591 |
| 19 | PUNCHED WASHER TYPE A FOR JET PUMP,MOC:SS410/416,AS PER DCIPS PUNCHED WASHER (TYPE DCIPS PUNCHED WASHER (TYPE A) FOR M 20 BOLTS IS 2016 OF OF JET PULSION PUMP,AS PER DRAWING,PART NO-05,MATERIAL: STEEL |
| 20 | GUIDE ANGLE LH FOR BA FEED GATE FOR BA FEED GATE DCIPS MOC-MS IS:2062 GR A,DRAWING NO 25P06-1B-T-572 |
| 21 | GUIDE ANGLE RH FOR BA FEED GATE FOR BA FEED GATE DCIPS MOC-MS IS:2062 GR A,DRAWING NO 25P06-1B-T-572 |
| 22 | GATE ROLER FITTED WITH BUSH FOR BA FEED GATE DCIPS DRAWING NO-25P06-T-1B-572,MATERIAL-STEEL-IS:1030 |
| 23 | RENEWABLE SEAT LIP FOR BA FEED GATE FOR BA FEED GATE DCIPS MOC-MS IS:2062 WITH SS316 LIP,DRAWING NO 25P06-1B-T-572 |
| 24 | ADJUSTABLE SEATING WEDGE # FOR BOTTOM ASH FEED GATE ASSEMBLY AS PER DRAWING NO.28P03-1B-T-576(REV-2) |
| 25 | ENCLOSURE COVER PLATE # DCIPS FOR BOTTOM ASH HOPPER FEED GATE ENCLOSURE, MOC:MS,IS:2062,10MM THK,AS PER DCIPS DRAWING NO 25P06-T-1B-572 |
| 26 | GASKET,FOR BA FEED GATE ACCESS DOOR FOR BOTTOM ASH MOC: NEOPRENE RUBBER , DCIPS DRG NO: 25P06-1B-T-572 |
| 27 | GASKET FOR FEED GATE ENCLOSURE FOR BA FEED GA MOC: NEOPRENE RUBBER |
| 28 | ELBOW,200NB X45 FOR WET ASH SYSTEM SGTPP DCIPS MOC: DURITE (ALLOY C.I),BHN:450-500,AS PER DCIPS DWG NO 25P06-1B-T-831 |
| 29 | ELBOW,200NB X90 FOR WET ASH SYSTEM SGTPP MOC: DURITE (ALLOY C.I) BHN:450-500.AS PER DCIPS DWG NO 25P06-1B-T-835 |
| 30 | LATERAL,200NBX45 P/P/P FOR WET ASH SYSTEM SGTPP BA SLURRY LINE.MOC: DURITE(ALLOY C.I) BHN: 450-500 |
| 31 | GUIDE ANGLE BRACKET FOR BA FEED GATE FOR BA FEED GATE DCIPS MOC-CI FG-220 IS:210,DRAWING NO 25P06-1B-T-572 Please Enable Macros to View BoQ information |
