|
| 1 | Shifting of barge to a suitable working site or place from the R.L.I. site and blocking of the barge by area clearance, earth cutting, winching, jacking,planking, block fixing and un-jacking and placing of the R.L.I. site including tools and plants for blocking.(b)Small Hatch Barge (22'-0\\" × 10'-0\\" × 4'-6\\") |
| 2 | Removing the pump set installed on the barge from the foundation including disconnection, removal of suction and delivery assemblies from the barge to a secured place and refitting of the same properly after the maintenance of the barge. |
| 3 | Opening ,straightening and refitting of plates ,angles, purlines , trusses, Bollard, expanded metal / B.R.C. net, winch etc. as required and as per direction of Engineer-In Charge.(b)Small Hatch Barge (22'-0\\" × 10'-0\\" × 4'-6\\") |
| 4 | Patch / Doubling works complete with 5 mm. M.S. plates including welding, Gas cutting, fitting, fixing, and complete.(a) Cost of 5 mm. M.S. plate including wastage due to cutting including labour charges for straightening, fitting, fixing in position. (Weight of 5mm plate 39.215 kg/m2) |
| 5 | (b) Gas cutting to required size of 5 mm thick M.S. plate,M.S channel etc. including labour charges, hires charges for all tools and plants. |
| 6 | (c) Electric welding charges of 5 mm M.S. Plates, channels etc. and other member of the barge including hiring charges of all tools and plants. |
| 7 | Supplying 1.5 mm (16 SWG) M.S. Sheet fitted and fixed on one or both faces of M.S/W.I. gate etc. with point welding not more than 150 mm apart complete in all respect as per design including cost of all labour and materials. |
| 8 | (a) Supplying, fitting & fixing of M.S. Angle (Size: 45 mm x 45 mm x 6 mm) including gas cutting etc. |
| 9 | (b) Supplying, fitting & fixing of M.S. Angle (Size: 50 mm x 50 mm x 6 mm) including gas cutting etc. |
| 10 | Supplying, fitting & fixing of M.S. Flat Bar 40mmx6mm for straightening the B.R.C net includil etc |
| 11 | Supplyng,fitting and fixing bolts with nuts & washers (i) 10 to 16 mm dia a)Length upto 75 mm |
| 12 | (b)Drilling charges 12 mm dia hole for manhole coverplate and MS channel base. |
| 13 | Chipping, scraping wire brushing and cleaning of the painted surface of keel, Hall, Frame, superstructure deck, fender both inside and outside as per direction of the Engineer in charge.(b)Small Hatch Barge (22'-0\\" × 10'-0\\" × 4'-6\\") |
| 14 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 15 | Painting One Coat on Steel Work with Zinc Phosphate PRIMER of approved make and brand(min Dry Film Thickness (DFT) 50 micron) at all locations prepared and applied as per manufacturers specifications, including smoothening surfaces by sand paper etc. for removal of old painting. |
| 16 | b) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surface :b) With other than hi-gloss of approved qualityii) Two coats (with any shade except white) |
| 17 | Painting with Coal Tar Epoxy paint two coats of approved make and brand (Minimum Dry Film Thickness (DFT) 200 micron) at all locations prepared and applied as per manufacturers specifications (On steel surface) |
| 18 | Transportation charges for carrying of all materials, working devices etc. up to the scheme and back. |
| 19 | Add GST @18% (Item No.1 to 15) |
| 20 | Add Cess @1% (Item No.1 to 16) Please Enable Macros to View BoQ information |
