|
| 1 | Cutting uprooting and clearing jungles including shrubs, water weeds,bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge. |
| 2 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. |
| 3 | Dismantling of existing structures like culverts, bridges,retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specifications Clause202 for Rural Roads of MORD. (b) Cement mortar |
| 4 | Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 for Rural Roads of MORD including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 5 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. (b) Where staging is not required. |
| 6 | Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 8 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster |
| 10 | Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m |
| 11 | Fabrication, supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of canal/river made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS: 2062 2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries, Manpower, Cutting. Aligning, Anchoring, Welding. Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting)Remarks: Cost for civil works to be taken from PWD (R) directorate seperatlyiii)Guide Channel |
| 12 | Bearing no.51108 (SKF)(Thrust bearing) |
| 13 | Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. |
| 14 | Fabrication, supply, erection and commissioning of embeded parts consisting of hinge bracket with its accessories for vertical flap gateshutter of distributories/branch canal/minor canal/channel made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) |
| 15 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC |
| 16 | Holding down bolt with nut including 100 x 100 x 6 mm plate washerat bottom fitted complete and packing the hole with cement concreteor cement grout as directed.(ii) 20 mm dia bolt.(a) 300 mm long |
| 17 | Painting of embedded parts, all types of gates, stoplogs and barscreen/gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless s p r a y preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns)including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
| 18 | Taking out sluice gate draw shutter gearing arrangements & pedestal including refitting the same with new nuts & bolts where necessary.(a) Up to 4 sqm.(i) Taking out and refitting the same. |
| 19 | Taking out flap shutter of sluice gate including hoisting arrangements and refitting the same with new nuts & bolts where necessary(a) Up to 4 sqm.(i) Taking out and refitting the same. |
| 20 | Taking out & refitting the Jack & Gear including supply of new nuts & bolts, cleaning & greasing, if necessary and as directed by the Engineer - in -charge.(a) Taking out and refitting the same. |
| 21 | Taking out screw gearing by cutting nuts and bolts from draw shutter & refitting with new nuts & bolts to be supplied by the contractor without any extra payment.(a) Taking out and refitting the same. Please Enable Macros to View BoQ information |
