|
| 1 | Excavation over areas n. exc 1.5m deep & getting out in all type of soil/sdr complete all as specified and directed. |
| 2 | M&L Moorum / red bajri filling floors or pavings with laid in layers not exc 15cm thick spread levelled and rammed including watering complete all as specified and directed. |
| 3 | Removing excavated soil/sdr to a distance exc 250m but not exc 500m and depositing where directed complete all as specified and directed. |
| 4 | M&L for Plain Cement concrete Type - D-2 (1:4:8) (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approvedcolour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 6 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 7 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 8 | M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 9 | M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed. |
| 10 | M & L for plain cement concrete Type C-1(1:3:6) (using 20 mm graded stone aggregate), cills, steps, parapets , copings,bond stone, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 11 | Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed. |
| 12 | M&L for raised pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 13 | S&F 110mm PVC (SWR) pipes single socketed, in any length as in weep holes with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 15 | M&L cement concrete work in road/path/hardstanding of flexural strength 40 Kg/sqcm in field using 400kg of cement per cubic metre thickness of concrete 25 cm or less complete all as specified and directed. Using cement OPC Grade 43 only, rate to be deemed in the same item of OPC cement no extra payment shall be made complete all as specified and directed. |
| 16 | M&L for spike rolling to surfaces or making impression of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 17 | M& L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ upto 200 mm depth complete all as specified and directed. |
| 18 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm ia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 19 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 20 | M&L providing precast cement concrete in culvert /drain covers with plain fair faces including chamfered, weathering, throating etc. and setting in mortar complete with joints to match type B1 1:2:4 (20 mm graded aggregate) set in cement mortar in 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
