Name of Work:- Civil maintenance works at Kalyani IT Park (phase 2) (Total estimated cost: Rs.1,63,740.17 including GST).
Sl. No.
Item Description
1
Description
2
SUPPLYING 'GODREJ' MORTICE LOCK CHROMIUM PLATED WITH KEYS 6 LEVERS INCLUDING FITTING & FIXING COMPLETE. Godrej mortice lock
3
Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White), 16 inch
4
LABOUR FOR TAKING OUT DOOR AND WINDOW FRAMEINCLUDING SHUTTER FOR REPAIR OR REPLACEMENT OFDIFFERENT PARTS OF THE FRAME & REFIXING THE SAME INCLUDING MENDING GOOD ALL DAMAES COMPLETE. UPTO 2.5 SQM Taking out door and window frame
5
TAKING OUT SHUTTER OF DOOR AND WINDOW, DISMANTLING BY PARTS (FOR REPAIR OR REPLACEMENT OF DAMAGED PARTS) , REASSEMBLING AND REFITTING AND REHANGING SAME WITH OLD FITTINGS BUT WITH NEW SCREWS ASNECESSARY. Repair or replacement of damaged parts
6
TAKING OUT OLD IRON HIGES AND FITTING, FIXING THE SAME WITH NEW STEEL SCREWS. 125 MM LONG HINGE. Fitting, fixing the same with new steel screws
7
Supply and fixing 25 mm dia Gunmetal wheel valve (Make: Leader/ Zoloto)
8
SUPPLYING, FITTING AND FIXING BIB COCK OR STOP COCK (I) CHROMIUM PLATED BIB COCK SHORT BODY (EQUIVALENT TO CODE NO. 511 & MODEL - TROPICAL / SUMTHING SPECIAL OF ESSCO OR SIMILAR BRAND) Chromium plated Bib Cock short body
9
GODREJ HYDRAULIC DOOR CLOSER FITTED AND FIXEDCOMPLETE, HEAVY TYPE Hydraulic door closer
10
M.S.GATE OF JAIL TYPE AS PER APPROVED DESIGN MADE OF STRONG M.S. FRAME WORK, INTERMEDIATE STIFFENERS AND ROUND / SQUARE BARS OR ANGLES. M.S. SHEET (NOT LESS THAN 14 GAUGE) GUSSETS, CLEATS ETC. INCLUDING NECESSARY RIVETING, BOLTING, WELDING, LOCKING AND HANGING ARRANGEMENTS, FITTING AND FIXING COMPLETE,UPTO 3RD FLOOR M.S. frame work, intermediate stiffeners and round / square bars or angles
11
SUPPLYING FITTING AND FIXING DOOR FRAME WITH M.S. ANGLE AS PER DRAWING & DIRECTION OF REQUIRED SECTION.THE HOLES FOR COUNTER SUNK MACHINE SCREW & NUTS WILL BE SUCH AS TO FIT 8 TO 10MM IRON SCREW.THE COUNTER SUNK NUT TO BE WELDED. THE NUTS ARE TO BE WELDED AFTER CAREFUL CHECKING WITH SCREW.ALL WELDING SPOTS SHOULD BE PROPERLY FILED OR ROUNDED SMOOTH INCLUDING COST OF WELDING HINGES FOR HING ECLEATS , LUGS FOR HASPBOLT, SOCKETBOLT ETC. AND NECESSARY M.S. CLAMPSOF 25MMX6MM FLAT 225MM LONG AS PER DIRECTION WELDED TO THE FRAME FITTEDAND FIXED IN POSITION INCLUDING COST OF CONCRETE. AT ALL FLOOR M.S. clamps of 25mmx6mm flat 225mm long
12
SUPPLYING SOLID FLUSH TYPE DOORS OF COMMERCIAL QUALITY, THE TIMBER FRAME CONSISTING OF TOP ANDBOTTOM RAILS AND SIDE STYLES OF WELL SEASONED TIMBER 65MM WIDE EACH AND THE ENTIRE FRAME FITTED WITH 37.5MM WIDE BATTENS PLACES BOTH WAYS IN ORDER TO MAKE THE DOOR OF SOLID CORE AND INTERNAL LIPPING WITH GARJAN OR SIMILAR WOOD VENEERS USING PHENOL FORMALDEHYDE AS GLUE ETC. COMPLETE, INCLUDING FITTING, FIXING SHUTTERS IN POSITION BUT EXCLUDING THE COST OF HINGES AND OTHER FITTINGS ALL FLOORS. 35 MM THICK SHUTTERS (SINGLE LEAF) Timber frame consisting of top and bottom rails and side styles of wellseasoned timber Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
