|
| 1 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required. 4Cx16 Sq. mm Armoured Al cable (9.1.33) |
| 2 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (Make- Duraline, Gemini, Tirupati, Astral and Supreme)63 mm dia (OD-63 mm & ID-51 mm nominal) (14.16.1) |
| 3 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.(Make-B class -Jindal/TATA/QST) (5.2) |
| 4 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable trench etc as required. (5.18) |
| 5 | Providing, laying and fixing 80 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required(Make-B class -Jindal/TATA/QST) (14.13.2) |
| 6 | Providing and making steel pole collar with cement concrete (1cement : 3 coarse sand : 6 stone aggregate 20mm) of specifiedsize and shape including form work, plastering if required,curing etc as required. (volume of pole/ pipe not to bededucted) (11.5) |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade ,Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (13.62.1) |
| 8 | Supplying and laying of one number XLPE insulated and PVC sheathe power cable of 1.1 KV grade of 4Cx16 Sq. mm cable size in the existing RCC/ HUME/ METAL/DWC pipe etc as required.((Make-Polycab/Universal/Havells/KEI/Finolex) (7.5.1+MR) |
| 9 | Supplying and laying of one number additional XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following size in loose for connection etc complete as required.(Make-Polycab/Universal//Havells/KEI/Finolex) 4Cx16 Sq. mm Armoured Al cable |
| 10 | Supplying, installation, testing & commissioning of 120 watt Top Maintainable Street Light LED fitting (IP-66) made up of pure polyester powder coated pressure die cast aluminium with LEDs have optical grade polycarbonate lens & electronic driver for better distribution of light on existing street light pole with power factor>0.95, THD<10%, CRI>70% ,system efficacy ≥110 Lm/W & CCT-3000K to 5700K i/c making connection etc. complete as required.(Make-Crompton Model No TRP-409-45-57-SL-GL-NSG or equivalent specification of Wipro/Phillips/Bajaj/ Crompton ) (8.12.16) |
| 11 | Supplying & erection of flange mounted hot dip galvanized octagonal poles of 6 Mtrs. height made from 3 mm thick HR Steel plate having effective bottom dia of 130 mm & effective top dia of 70 mm complete with window sleeve type cover arrangement at a height of 0.5 Mtrs from the base for cable termination block welded on both ends etc. and galvanized base plate of size 200 mm x 200 mm x 12 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination. (Surya/Orient/polycab/LT/Utkarsh)Each pole should have followingSupply & fixing 1 no. 6 mm thick laminated mounted sheet inside the window i/c providing mounting arrangement etc complete as reqd.Supply and fixing 63 amps. terminal block suitable for 1.1 KV grade 4CX 16 sq. mm Armoured cable - 4 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length on the existing laminated sheet. Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 1 No., earth stud -1 No., welded at suitable height one nos washers, springs washers & nuts. Provision on suitable height for fixing of additional bracketCable supports clamps suitable for 4x10 /4 x 16 sq. mm cable. |
| 12 | Providing and laying in position (1:2:4) reinforced cement Concrete foundation of size 450 mm (L) X 450mm wide and 1200mm deep i/c excavation of rocky earth, providing cutting, bending and placing in position, reinforcement ring of cold twisted bars of 12 mm dia 1350 mm long (approx.) 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia -1800mm (approx.) 8 nos. (with 150 mm spacing) as required with positioning of foundation bolts and providing 40 mm dia (O.D.) DWC, HDPE pipe of 0.3 Mtrs. length for cable entry & exit as reqd. as per annexure 1 |
| 13 | Supplying and Fixing 4 Nos. 20 mm dia. X 600mm long GI foundation J Bolt (EN8 grade) with nuts,washer including 2 Nos. template of 3 mm thick size 200mmX200mm with 4 Nos. 24mm dia holes to match with PCD of Pole base plate as reqd. |
| 14 | Fabrication, supplying & fixing of single/double/triple over hang galvanized arm bracket made out of Suitable dia & 500 mm to 1500 mm long & top tube with suitable dia etc complete as required.(Design as per approved sample). |
| 15 | Supplying and drawing following size of PVC insulated copper conductor multicore cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable lugs connections etc. as reqd.(Make-L&T/Finolex/National/Polycab/Grandlay)3 core 1.5 sq.mm 1.1 KV grade Please Enable Macros to View BoQ information |
