Tender For Protection Work On Naini-Saini Devat Kumdar To Kanari Motor Road In Pithoragarh Constituency Of Pithoragarh District Under Honrable Chief Ministers Announcement Number 521/2025., Pithoragarh-Uttarakhand
TDR : 55550072
Tender Notice
BOQ
21 Days Left
Pithoragarh
Uttarakhand
Tender For Protection Work On Naini-Saini Devat Kumdar To Kanari Motor Road In Pithoragarh Constituency Of Pithoragarh District Under Honrable Chief Ministers Announcement Number 521/2025.
Name of Work:- Protection work on Naini-Saini Devat Kumdar to Kanari motor road in Pithoragarh constituency of Pithoragarh district under Honrable Chief Ministers announcement number 521/2025.
Sl. No.
Item Description
1
Type - A, \\"W\\" : Metal Beam Crash BarrierProviding and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1 . 8 m high , 1 .1 m below ground/ road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 (if Concrete Required for Vertical post Fixing will be paid extra)
2
Road Delineators / Vertical Guide Posts:Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficien to retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandal-proof. Including all test report and warranties as per IRC 67 and IRC 79. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
