|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Providing and Placing in position a judge table in completely knock down conditions with an overall size 5250 X 750 X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The worktop shall be made up of 50mm thick MR Garde PLY with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick PVC edge banding. The table top shall be supported on particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 50mm thick MR Garde PLY with approved laminate and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick MR Garde PLY with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. |
| 3 | Supplying & Placing Main Judge Wooden Chair. The seat and back shall be made of 12mm thick plyboard and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m³ with leatherite/fabric tapestry 0.8mm thick and 535 GSM. Upholstered shall be leatherrate with nailhead trim. Armrests: Fixed type Arms polished wooden top made up of Hardwood with padding & armrests with smooth edges. The frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish & Proportions shall be tall and slightly wide, ensuring visual prominence. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500 - 550±20 mm(D) X 550- 650 ±20 mmW) and back size shall be 500 - 600±20 mm(W) & Back height shall be 1000 -1150 ±20 mm. Seat Height 450- 500±20 mm, Back Height 900 -1100±20 mm, Overall height shall be 1500-1600 ±20mm. |
| 4 | Supplying & Placing Judge Wooden Chair. The seat and back shall be made of 12mm thick plyboard and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m³ with leatherite/fabric tapestry 0.8mm thick and 535 GSM. Upholstered shall be leatherrate with nailhead trim. Armrests: Fixed type Arms polished wooden top made up of Hardwood with padding & armrests with smooth edges. The frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish & Proportions shall be tall and slightly wide, ensuring visual prominence. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500 - 550±20 mm(D) X 550- 650 ±20 mmW) and back size shall be 500 - 600±20 mm(W) & Back height shall be 1000 -1150 ±20 mm. Seat Height 450- 500±20 mm, Back Height 900 -1100±20 mm, Overall height shall be 1400-1500 ±20mm. |
| 5 | Providing and Placing in position a Staff table in completely knock down conditions with an overall size 1200mm X 600mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 18mm thick MR Garde PLy with approved laminate and finish as per approved shade. The profile shall be in rectangle shape edges shall be sealed with 2mm thick PVC edge banding. The top shall be supported over MR Garde PLy base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 18mm thick MR Garde PLy and exposed edges will be sealed with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick MR Garde PLy with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of MR Garde PLy with approved laminate. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. |
| 6 | Providing and Placing in position a storage unit with an overall size 900mm X 450mm X 750mm. The storage shall be made up of PLy MR grade with approved laminate and finish as per approved shade. The top shall be 25mm thick and all other profile i.e. side, back, shutter, shelf, skirting shall be 18mm thick. The edges shall be sealed with thin strip of impermeable PVC edge banding . The storage shall have 1 nos. of adjustable/fixed shelf and 2 nos. of door shutters shall be provided for opening and closing the storage. The shutter shall be operated with concealed crank hinge with Al die cast handle as well as MP lock mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. There shall be buffers provided at the bottom to avoid scratches on the floor. |
| 7 | Providing and Placing in position a Visitor chair with ergonomic design, comfortable & aesthetically appealing. The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply-board padded with high resilience polyurethane foam (50+25+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and die cast aluminium end caps. The frame structure shall be cantilever support type made of MS CRCA chrome plated round pipe of dia. 28.5mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 510±10 mm(W) and back size shall be 525±10 mm(W) X 560±10 mm(H) from seat. Overall height shall be = 1010±10 mm. |
| 8 | Providing and Placing in position a Three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. Cushion arm shall be supplied with backrest frame and padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The legs shall be 40mm thick round & 150mm height wooden leg with 3mm thick MS gold plating sheet . Overall width = 2155±10 mm, overall depth = 840±10 mm & overall height = 760±10 |
| 9 | Providing and Placing in position a chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick ply-board padded with high resilience polyurethane foam 50 mm thick having density 40 Kg/m³ and the back shall be made of 12mm thick hot pressed commercial plywood padded with 40mm thick having density 32kg/m³. The seat and back shall be upholstered with leatherette tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. The chair shall be supplied with cushion arm with covering top completely joint with seat and back.The frame structure shall be supported by four legs made up of MS chrome plated in round shape. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 485±10 mm (D) X 450±10 mm (W) and back size shall be 540±10 mm (H) from seat. Overall height shall be = 955±10 mm, overall depth/width = 640±10 mm. |
| 10 | Providing and Placing in position a Centre Table. The top shall be made of which shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table 1200 mm, Depth 600 mm, height 450 mm. |
| 11 | Providing and Placing in position a Centre Table. The top shall be made of which shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table 600 mm, Depth 600 mm, height 450 mm. |
| 12 | Providing and Placing in position a as per the direction of Engineer Incharge. Wooden Podium, 750W)*500{D)*1150MM{H| made of 18mm thick MR Grade Ply with pvc edge banding. Podium with one open fixed shelve. |
| 13 | Providing and Placing in position a Table with completely knock down conditions with an overall size 3300 X 600 X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The worktop shall be made up of 36mm thick MR Garde PLY with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick PVC edge banding. The table top shall be supported on particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 36mm thick MR Garde PLY with approved laminate and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick MR Garde PLY with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. |
| 14 | Providing and Placing in position a Visitor chair with ergonomic design, comfortable & aesthetically appealing. The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply-board padded with high resilience polyurethane foam (50+25+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and die cast aluminium end caps. The frame structure shall be cantilever support type made of MS CRCA chrome plated round pipe of dia. 28.5mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 510±10 mm(W) and back size shall be 525±10 mm(W) X 560±10 mm(H) from seat. Overall height shall be = 1010±10 mm. Please Enable Macros to View BoQ information |
