|
| 1 | Carrying out ground water servey using VES method at Goting BOP of 8th BN ITBP, Gauchar. |
| 2 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders 125 mm dia |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia having minimum wall thickness 5.00 mm |
| 4 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia |
| 5 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approvedlaboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 6 | Providing and lowering Kirloskar/KSB/Cropmton greaves/GEC/ Seimens submersible pump set 4 HP 2760 RPM 3 phase 415 Volt 50 Hzs with discharge head 90 mtr & discharge capacity 100-500 LPM 21 stage |
| 7 | Providing and fixing/ lowering 6 sqmm copper conductor submersible cable of Havells/L&T/Rallison 3 Phase 415 volt 50Hzs |
| 8 | Poviding and fixing star Delta 3 phase 415 v motor starter for submersible motor pump i/c fixing on suitable board and making all connection complete. Make Havells/L&T/Siemans/Crompton Greaves. |
| 9 | Supplying of Kirloskar/KSB/Cropmton greaves/GEC/ Seimens submersible pump set 4 HP 2760 RPM 3 phase 415 Volt 50 Hzs with discharge head 90 mtr & discharge capacity 100-500 LPM 21 stage for stand by purpose. |
| 10 | Supplying star Delta 3 phase 415 v motor starter for submersible motor pump i/c fixing on suitable board and making all connection complete. Make Havells/L&T/Siemans/Crompton Greaves.for stand by purpose. |
| 11 | Providing and laying Polypropylene Random Copolymer (PP-R) (PN-16SDR7.4)-3 layers delivery pipe 40mm outer dia and 26.6mm inner dia pipe with including SFMC fittings such as Bends,Eelbows,Tee ,short length, Socket, Union, Check Nuts, Nipples& Gate valves etc. (Females/Males as required) and including trenching, refilling & testing of joints complete Pipe Uv stabilized and anti-microbial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings. |
| 12 | Providing and laying Polypropylene Random Copolymer (PP-R) (PN-20SDR6)-3 layers suction pipe 63mm outer dia and 40 mm inner dia pipe with including SFMC fittings such as Bends,Eelbows,Tee ,short length, Socket, Union, Check Nuts, Nipples& Gate valves etc. (Females/Males as required) and trenching, refilling & testing of joints complete as per direction of Engineer in Charge, suitable for hot/ cold climatic conditions. |
| 13 | Providing & fixing C.P Brass long nose bib cock of L&K/Kingstone/ Ranutrol/ Hansa quality Conforming IS: 8931. 15 mm nominal bore. |
| 14 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. |
| 15 | Providing & fixing safety rope (polypropylene Rope 15 mm) for submersible motor in bore well Including all charges |
| 16 | Transportation & mobilization of machinery & all the equipment casing pipe & pump to the working site. |
| 17 | Providing fixing PPR non return valve 40 mm dia complete with necessary fittings. |
| 18 | Providing fixing PPR ball valve 25 mm dia complete with necessary fittings. |
| 19 | Providing fixing PPR ball valve 40 mm dia complete with necessary fittings. Please Enable Macros to View BoQ information |
