|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 2 | Pipes cables etc. not exceeding 80mm dia as per DSR No. 2.10.1.1 |
| 3 | Pipes cables etc. exceeding 80mm dia but not exceeding 300mm dia as per DSR No. 2.10.1.2 |
| 4 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4.1 |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 6 | 12 mm cement plaster of mix as per DSR 13.1 |
| 7 | 1:4 (1 cement: 4 fine sand) as per DSR 13.1.1 |
| 8 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 9 | W.C. pan with ISI marked white solid plastic seat and lid DSR 17.3.1 |
| 10 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 11 | Kitchen sink without drain board DSR 17.10.2 |
| 12 | 610x460 mm bowl depth 200 mm DSR 17.10.2.2 |
| 13 | Providing and fixing white vitreous chinawarecloset squatting pan DSR 17.13 |
| 14 | Orissa pattern W.C. pan of size 580 mm DSR 17.13.2 |
| 15 | Providing and fixing C.P. brass Jet with brass nossel steel flange & PVC flexible pipe complete in all respect DSR 17.16.A |
| 16 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete DSR 17.19 |
| 17 | 10 litre ( flush) capacity-white DSR 17.19.1 |
| 18 | Providing and fixing soil, waste and vent pipes : DSR No. 17.35 |
| 19 | 100 mm dia. DSR 17.35.1 |
| 20 | Sand cast iron S&S pipe as per IS: 3989. DSR 17.35.1.2 |
| 21 | 75 mm diameter : DSR 17.35.2 |
| 22 | Sand cast iron S&S pipe as per IS: 3989 DSR 17.35.2.2 |
| 23 | Providing and fixing plain bend of required degree. DSR No. 17.39 |
| 24 | 100 mm dia as per DSR No. 17.39.1.2 |
| 25 | Providing and fixing heel rest sanitary bend as per DSR 17.40 |
| 26 | 100 mm dia as per DSR 17.40.1.2 |
| 27 | Providing and fixing collar DSR No. 17.57 |
| 28 | 100 mm dia as per DSR No. 17.57.1.2 |
| 29 | 75 mm dia as per DSR No. 17.57.2.2 |
| 30 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR No. 17.60 |
| 31 | 100 mm inlet and 75 mm outlet DSR 17.60.2.1 |
| 32 | P/F of G.I. pipes compelte with G.I. fitting and clamps including making good the wall etc. |
| 33 | 20 mm dia nominal bore DSR 18.10.2 |
| 34 | 32 mm dia nominal bore DSR 18.10.4 |
| 35 | P/F of G.I. pipes compelte with G.I. fitting and clamps including making good the wall etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11 |
| 36 | 15 mm dia nominal bore DSR 18.11.1 |
| 37 | 20 mm dia nominal bore DSR 18.11.2 |
| 38 | P/F of G.I. pipes compelte with G.I. fitting s including trenches & filling etc as per DSR No. 18.12 |
| 39 | 20 mm as per DSR 18.12.2 |
| 40 | Providing and fixing of Gun-Metal Peat Valve |
| 41 | size 20mm DSR 18.17.1A |
| 42 | Providing and fixing uplasticised PVC connection pipe with brass unions :DSR No. 18.21 |
| 43 | 15 mm nominal bore DSR 18.21.2.1 |
| 44 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR No. 18.46 |
| 45 | 15 mm nominal bore DSR 18.46.1 |
| 46 | 20 mm nominal bore DSR 18.46.2 |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.DSR 18.48 |
| 48 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49 |
| 49 | 15 mm nominal bore. DSR 18.49.1 |
| 50 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51.1 |
| 51 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points ... DSR 18.53 |
| 52 | 15 mm nominal bore. DSR 18.53.1 |
| 53 | Providing and fixing of C.P. Extension nipple upto 1'' length . DSR 18.53.A |
| 54 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 55 | 15mm nominal bore DSR 18.62.1 |
| 56 | 20 mm nominal bore, 18.62.2 |
| 57 | Cutting holes up to 30x30 cm in walls including making good the same: DSR No. 18.76 |
| 58 | With F.P.S. bricks DSR 18.76.1 |
| 59 | Cutting holes up to 15 x 15 cm in R.C.C. floore and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make if leak proof. DSR No. 18.77 |
| 60 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" dia of approved make |
| 61 | Providing and fixing of G.I. elbow 80 mm x 32 mm of approved make. |
| 62 | Construction of Curb consisting of cement concrete 1:2:4 including cost of sand bajri etc. |
| 63 | Providing and fixing drip seal joint |
| 64 | 100 mm dia. |
| 65 | 75 mm diameter : |
| 66 | Providing and fixing Single 3-inlet Divertor Exposed parts kit Make Jaquar Range concealed part ALD-193 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 67 | Providing and fixing concealed stop cock complete with internal part body make jaquar + 083 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 68 | Providing and Fixing 15mm PVC Connection of approved make |
| 69 | Replacement of Monoblock pump set 1 H.P. make Crompton with required platform and electricla wire complete in all resects or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 70 | Replacement of Hydro Pneumatic Pump of size 0.5 HP Single Pump complete with Connecting Cable, NRV , having discharge 2000 LPH at 6 mtr head make Crompton Model MiniForce II or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 71 | Providing and fixing of Slim Concealed Cistern Body with drain pipe connection set for Wall Hung WC complete Jaquar JCS 2400S or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 72 | Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board, PVC beading and C.P. Screw etc. to satisfaction of EIC of approved make |
| 73 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 74 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 75 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 76 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 77 | 110 mm |
| 78 | 90 mm |
| 79 | Providing and fixing HCI Cover with frame for GT & IC of approved make |
| 80 | Providing and fixing of looking glass with PVC beeding 1/4\\" with plastic hard board complete in all respect |
| 81 | Providing and fixing of colour WHB (630x450mm) and Pedestal of M-cera make with C.I brackets 32mm C.P. brass waste of approved make as per standard pattern including cutting and painting of brackets and making good the walls CAT No. 1022 & 1121 (Concord with Pedestal) or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC Please Enable Macros to View BoQ information |
