|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) Including dressing of sides and amming of bottum, lift upto 1.5 m, including getting out the excavated soil and disposal of surface excavated soil as directed, within lead up to 50m All kinds of soil |
| 2 | Demolishing cement concrete manually/ by mechanical means 15.2.1 Including disposal of material within 50 metres lead as per direction of Engineer In charge. Nominal concrete 1:3:6 or richer mix (i/c) equivalent design mix |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 4 | Brick work with F.P.S. bricks of class designation 10 in foundation and plinth in:Cement mortar 1:4 (1 cement: 4 coarse sand) (Old Bricks available on site. |
| 5 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar |
| 6 | Demolishing R.C.C. work manually/ by mechanical means Including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 7 | Disposal of building rubbish/malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading. transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:1:4:8 (1 Cement: 4 coarse sand (Zone-III) drived from natural sources: 8 graded stone aggregate 40 mm nominal size drived from natural sources). |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:2:4 (1 cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size) |
| 10 | 12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) |
| 11 | Neat cement punning |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. |
| 15 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/retard setting of concrete, Improve workability without Impairing strength and durability as per direction of the Engineer-In-charge. (Note -Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/recoverable separately) All works upto plinth level |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting. bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 17 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, 16.93 neat cement punning on finished surface, properly encased on all edges with 2.75 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc ic cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. |
| 18 | Providing and Fixing Factory made precast RCC perforated drain covers, having concrete of strength not less then M-25, of size 1000x450x450 mm reineforced with 8mm dia four nos longitudinal & 9 nos crosss sectional TMT hoop bar, including providing 50 mm dia per forations 100 to 125 mm cic including providing edge binding with MS flats of size 50mm x 1.6 mm complete all as per direction of Engineer-in-charge.23.9 NOIDA AOR |
| 19 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable 16.83 material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 20 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape. laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 21 | Steel work welded in built up sections/framed work including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 22 | Supply of labour complete at site on etc. in all respect as per direction |
| 23 | Hiring of diesel engine(including cost of diesel, lubricant, & operator) Please Enable Macros to View BoQ information |
